DSEI 2x 30 DSEI 2x 31 Fast Recovery Epitaxial Diode (FRED) VRRM V V 1200 1200 miniBLOC, SOT-227 B E72873 Type DSEI 2x 30-12B DSEI 2x 31-12B DSEI 2x 30 DSEI 2x 31 Symbol Test Conditions Maximum Ratings (per diode) IFRMS IFAVM yy IFRM TVJ = TVJM TC = 50C; rectangular, d = 0.5 tP < 10 ms; rep. rating, pulse width limited by TVJM 70 28 375 A A A IFSM TVJ = 45C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 210 A A TVJ = 150C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 185 195 A A TVJ = 45C 200 180 A2s A2s 170 160 2 As A2s -40...+150 150 -40...+150 C C C 100 W 2500 V~ Features I2t t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = 150C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ TVJM Tstg Ptot TC = 25C VISOL 50/60 Hz, RMS IISOL 1 mA Md Applications Mounting torque Terminal connection torque (M4) 1.5/13 1.5/13 Weight 30 Nm/lb.in. Nm/lb.in. g Symbol Test Conditions Characteristic Values (per diode) typ. max. IR TVJ = 25C TVJ = 25C TVJ = 125C VR = VRRM VR = 0.8 * VRRM VR = 0.8 * VRRM 0.75 0.25 7 mA mA mA VF IF = 30 A; TVJ = 150C TVJ = 25C 2.2 2.55 V V VT0 rT For power-loss calculations only TVJ = TVJM 1.65 18.2 V mW 1.25 K/W K/W 0.05 trr IF = 1 A; -di/dt = 100 A/ms; VR = 30 V; TVJ = 25C 40 60 ns IRM VR = 540 V; IF = 30 A; -diF/dt = 240 A/ms L 0.05 mH; TVJ = 100C 16 18 A IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions (c) 2000 IXYS All rights reserved Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages RthJC RthCK International standard package miniBLOC (ISOTOP compatible) Isolation voltage 2500 V~ 2 independent FRED in 1 package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling 009 VRSM IFAVM = 2x 28 A VRRM = 1200 V trr = 40 ns 1-2 http://store.iiic.cc/ DSEI 2x 30, 1200 V DSEI 2x 31, 1200 V 70 A 60 6 TVJ=100C C V = 540V R 5 50 IF=30A IF=60A IF=30A IF=15A 4 IF Qr TVJ=25C TVJ=100C TVJ=150C 40 30 3 50 A TVJ=100C VR= 540V 40 max. IF=30A IF=60A IF=30A IF=15A IRM 30 20 2 20 typ. max. 1 10 0 10 typ. 0 0 0 1 2 3 V 4 1 10 VF 100 A/s 1000 0 Fig. 1 Forward current versus voltage drop. Fig. 3 Peak reverse current versus -diF/dt. 60 1.0 TVJ=100C VR=540V s 1.2 0.8 Kf IRM trr 0.8 0.6 1200 V ns 50 1000 VFR IF=30A IF=60A IF=30A IF=15A max. 0.6 40 800 30 600 20 400 VFR tfr 0.4 QR 0.4 tfr 0.2 10 typ. 0.2 0.0 0.0 0 40 80 400 A/s 600 -diF/dt Fig. 2 Recovery charge versus -diF/dt. 1.4 1.0 200 -diF/dt 120 C 160 0 0 200 TJ Fig. 4 Dynamic parameters versus junction temperature. TVJ=125C IF=30A 400 A/s 600 0 diF/dt Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Dimensions Fig. 7 Transient thermal impedance junction to case. 0 400 A/s 600 200 -diF/dt 200 miniBLOC SOT-227 B M4 screws (4x) supplied (c) 2000 IXYS All rights reserved Dim. Millimeter Min. Max. Inches Min. Max. A B 31.50 7.80 31.88 8.20 1.240 0.307 1.255 0.323 C D 4.09 4.09 4.29 4.29 0.161 0.161 0.169 0.169 E F 4.09 14.91 4.29 15.11 0.161 0.587 0.169 0.595 G H 30.12 37.80 30.30 38.20 1.186 1.489 1.193 1.505 J K 11.68 8.92 12.22 9.60 0.460 0.351 0.481 0.378 L M 0.76 12.60 0.84 12.85 0.030 0.496 0.033 0.506 N O 25.15 1.98 25.42 2.13 0.990 0.078 1.001 0.084 P Q 4.95 26.54 5.97 26.90 0.195 1.045 0.235 1.059 R S 3.94 4.72 4.42 4.85 0.155 0.186 0.174 0.191 T U 24.59 -0.05 25.07 0.1 0.968 -0.002 0.987 0.004 V W 3.30 0.780 4.57 0.830 0.130 19.81 0.180 21.08 2-2 http://store.iiic.cc/