BUZ80A BUZ80AFI N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR TYPE V DSS R DS( on) ID BUZ80A BUZ80AFI 800 V 800 V < 3 < 3 3.8 A 2.4 A TYPICAL RDS(on) = 2.5 AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100oC LOW INPUT CAPACITANCE LOW GATE CHARGE APPLICATION ORIENTED CHARACTERIZATION 3 1 3 2 1 TO-220 APPLICATIONS HIGH CURRENT, HIGH SPEED SWITCHING SWITCH MODE POWER SUPPLIES (SMPS) CONSUMER AND INDUSTRIAL LIGHTING DC-AC INVERTERS FOR WELDING EQUIPMENT AND UNINTERRUPTIBLE POWER SUPPLY (UPS) 2 ISOWATT220 INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value BUZ80A VD S V DG R V GS Unit BUZ80AFI Drain-source Voltage (V GS = 0) 800 V Drain- gate Voltage (R GS = 20 k) 800 V 20 Gate-source Voltage V ID Drain Current (continuous) at T c = 25 oC 3.8 2.4 A ID o Drain Current (continuous) at T c = 100 C 2.3 1.4 A Drain Current (pulsed) 15 15 A ID M(*) P tot V ISO T stg Tj o Total Dissipation at Tc = 25 C 100 40 W Derating Factor 0.8 0.32 W/o C Insulation Withstand Voltage (DC) 2000 Storage Temperature Max. Operating Junction Temperature V -65 to 150 o C 150 o C (*) Pulse width limited by safe operating area April 1993 1/10 BUZ80A/BUZ80AFI THERMAL DATA R thj-cas e Rthj- amb Rt hc- sin k Tl Thermal Resistance Junction-case Max TO-220 ISOWATT220 1.25 3.12 Thermal Resistance Junction-ambient Max Thermal Resistance Case-sink Typ Maximum Lead Temperature For Soldering Purpose o C/W 62.5 0.5 300 o C/W C/W o C Max Value Unit o AVALANCHE CHARACTERISTICS Symbol Parameter IA R Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by T j max, < 1%) 3.8 A E AS Single Pulse Avalanche Energy (starting T j = 25 o C, ID = I AR, VD D = 50 V) 200 mJ E AR Repetitive Avalanche Energy (pulse width limited by T j max, < 1%) 8 mJ IA R Avalanche Current, Repetitive or Not-Repetitive (T c = 100 o C, pulse width limited by T j max, < 1%) 2.2 A o ELECTRICAL CHARACTERISTICS (Tcase = 25 C unless otherwise specified) OFF Symbol V( BR)DSS Parameter Drain-source Breakdown Voltage Test Conditions I D = 250 A VG S = 0 I DS S Zero Gate Voltage V DS = Max Rating Drain Current (V GS = 0) V DS = Max Rating x 0.8 IG SS Gate-body Leakage Current (V D S = 0) Min. Typ. Max. 800 Unit V T c = 125 oC V GS = 20 V 250 1000 A A 100 nA ON () Symbol Parameter Test Conditions V G S(th) Gate Threshold Voltage V DS = V GS ID = 1 mA R DS( on) Static Drain-source On Resistance V GS = 10 V I D = 1.7 A V GS = 10 V ID = 1.7 A I D( on) On State Drain Current V DS > ID( on) x RD S(on) max V GS = 10 V Min. Typ. Max. Unit 2 3 4 V 2.5 3 6 Tc = 100o C 3.8 A DYNAMIC Symbol gfs () C iss C oss C rss 2/10 Parameter Test Conditions Forward Transconductance V DS > ID( on) x RD S(on) max Input Capacitance Output Capacitance Reverse Transfer Capacitance V DS = 25 V f = 1 MHz ID = 1.7 A VG S = 0 Min. Typ. Max. 1 Unit S 1100 150 55 pF pF pF BUZ80A/BUZ80AFI ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol t d(on) tr (di/dt) on Qg Q gs Q gd Typ. Max. Unit Turn-on Time Rise Time Parameter V DD = 30 V ID = 2.3 A VGS = 10 V R G = 50 (see test circuit, figure 3) Test Conditions 65 150 90 200 ns ns Turn-on Current Slope V DD = 600 V I D = 3.8 A R G = 50 VGS = 10 V (see test circuit, figure 5) 80 110 A/s Total Gate Charge Gate-Source Charge Gate-Drain Charge V DD = 400 V 55 8 26 70 nC nC nC Typ. Max. Unit 110 140 150 145 190 200 ns ns ns Typ. Max. Unit 3.8 15 A A ID = 5 A Min. V GS = 10 V SWITCHING OFF Symbol t r(Vof f) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions Min. V DD = 600 V I D = 3.8 A R G = 50 VGS = 10 V (see test circuit, figure 5) SOURCE DRAIN DIODE Symbol Parameter Test Conditions IS D I SDM(*) Source-drain Current Source-drain Current (pulsed) V S D () Forward On Voltage I SD = 7.6 A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 3.8 A di/dt = 100 A/s T j = 150 o C V R = 100 V (see test circuit, figure 5) t rr Q rr I RRM Min. V GS = 0 2 V 500 ns 4.3 C 17 A () Pulsed: Pulse duration = 300 s, duty cycle 1.5 % (*) Pulse width limited by safe operating area Safe Operating Areas For TO-220 Package Safe Operating Areas For ISOWATT220 Package 3/10 BUZ80A/BUZ80AFI Thermal Impedeance For TO-220 Package Thermal Impedance For ISOWATT220 Package Derating Curve For TO-220 Package Derating Curve For ISOWATT220 Package Output Characteristics Transfer Characteristics 4/10 BUZ80A/BUZ80AFI Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature 5/10 BUZ80A/BUZ80AFI Turn-on Current Slope Turn-off Drain-source Voltage Slope Cross-over Time Switching Safe Operating Area Accidental Overload Area Source-drain Diode Forward Characteristics 6/10 BUZ80A/BUZ80AFI Fig. 1: Unclamped Inductive Load Test Circuits Fig. 2: Unclamped Inductive Waveforms Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge Test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Reverse Recovery Time 7/10 BUZ80A/BUZ80AFI TO-220 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 D1 0.107 1.27 0.050 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.067 F2 1.14 1.70 0.044 0.067 G 4.95 5.15 0.194 0.203 G1 2.4 2.7 0.094 0.106 H2 10.0 10.40 0.393 0.409 L2 16.4 0.645 L4 13.0 14.0 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.2 6.6 0.244 0.260 3.5 3.93 0.137 0.154 3.75 3.85 0.147 0.151 D1 C D A E L9 DIA. H2 G G1 F1 L2 F2 F Dia. L5 L9 L7 L6 L4 P011C 8/10 BUZ80A/BUZ80AFI ISOWATT220 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.4 0.7 0.015 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 28.6 30.6 1.126 1.204 L4 9.8 10.6 0.385 0.417 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 O 3 3.2 0.118 0.126 B D A E L3 L3 L6 F F1 L7 F2 H G G1 O 1 2 3 L2 L4 P011G 9/10 BUZ80A/BUZ80AFI Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 10/10