n ORDERING INFORMATION
SN – A 100 BF
[Example] (a) (b) (c)
(a) Series Name SN : SN Series
(b) Input Voltage A: AC type
D: DC type
(c) Nominal Voltage 100 BF: 100 VAC
200 BF: 200 VAC
12/24 B: 12/24 VDC
n FEATURES
l I/O modules for interface between CPU and external input
devices or loads
l Ultra slim and light weight, SIL terminals type I/O modules
for high density mounting
—Size: 5 (W) × 20 (L) × 17 (H) mm
—Weight: approximately 3.0 to 3.5 g
l High isolation by employing photo-coupled
devices (between input and output: 2,500 V rms)
l Long life and maintenance free
l All solid state I/O module
l Compatible with NY relay size and terminals
arrangement (only output module type)
l RoHS compliant since date code: 6703 (except 204-207)
Please see page 9 for more information
SN SERIES
SOLID STATE RELAY (I/O Module)
MAXIMUM LOAD CURRENT 1 A
1
l Input module
RoHS compliant
2
SN SERIES
(a) Series Name SN : SN Series
3: 3 VDC (only AC type)
(b) Nominal Voltage (Input side) 5: 5 VDC
12: 12 VDC
24: 24 VDC
(c) Load Voltage A: AC type
D: DC type
(d) Load Current 01 : 1 A
(e) Kinds of Inverse Connection AC type Nil : with varistor
Protecting Element NV: without varistor
DC type Nil : Diode
HZ: Zener diode
( f ) Zero Cross function (AC type) F : without zero cross function
C : with zero cross function
( g) Output Polarity (DC type) Nil : Standard polarity
R : Reverse polarity
( h) Switching Speed (DC type) Nil : Standard
T : High speed type
n SPECIFICATIONS
• INPUT MODULE (SN-( ) B Type)
SN – 12 D 01 HZ – C R T
[Example] (a) (b) (c) (d) (e) ( f ) (g) (h)
l Output module
Item AC Input Module DC Input module
100 VAC
type
200 VAC
type
12/24 VDC type
INPUT
side
Input voltage range 80 to 132
Vrms
160to 265
Vrms
9.6 to 28.8 VDC
Rating input current Approximately 7 mArms Approx. 5 mA at
12 VDC
Approx. 10 mA at
24 VDC
Power frequency range 47 to 63 Hz - -
Must operate voltage (max.) 80 Vrms 160 Vrms 9.6 VDC
Must release voltage (max.) 30 Vrms 60 Vrms 5.0 VDC
Must release current (max.) 2 mArms 1.5 mA
OUTPUT
side
DC supply voltage (VDD) 4 to 6 VDC
Max. output current (VDD=5V) ±4 mA ±0.4 mA
Output logic Operate with negative true logic (active ow)
Maximum operate time (max.) 25 ms 10ms
Maximum release time (max.) 30 ms 10ms
Insulation resistance (initial value) Minimum 1,000 MΩ (at 500VDC) (for input-output)
Dielectric strength 2,500 Vrms 1 minute (for input-output)
Operating temperature range (no frost) -30ºC to +85ºC
Storage temperature range (no frost) -40ºC to +100ºC
Case color Yellow White
Weight Approximately 2.0 g Approximately 3.3 g
3
SN SERIES
Item AC Output module DC Output module
Remarks
INPUT Nominal Voltage (DC) 3 V, 5 V, 12 V, 24 V 5 V, 12 V, 24 V
side
Operate Voltage Range ±20% of nominal voltage
Must Operate Voltage max.80% of nominal voltage
Must Release Voltage Minimum 1 VDC (minimum 0.5 V*) *3 VDC type
3 VDC Type
130 Ω 180 Ω —
5 VDC Type
330 Ω 470 Ω 390 Ω
Input Impedance
(±10%)
12 VDC Type
1,0k Ω 1,5k Ω 1,2k Ω
24 VDC Type
2,2k Ω 3,0k Ω 2.4k Ω
OUTPUT Load Voltage Range 24 to 265 Vrms 3 to 30 VDC
side
Maximum Load Current 1.0 Arms 1.0 A
see CHARACTERISTIC DATA
Minimum Load Current 10 mArms 1 mA
Switching Current 50 A (60 Hz) 3 A (10 ms)
Max. Off-State Leakage Current
1.5 mArms (at 100 Vrms 60 Hz)
0.1 mA (at 30 VDC)
3.0 mArms (at 200 Vrms 60 Hz)
Max. On-State Voltage Drop 1.2 Vrms 1.2 V at max. load current
Maximum Operate Time (max.) 1 ms 1 ms
Maximum Release Time 1/2 cycle + 1ms 1 ms
Insulation Resistance Minimum 1,000 M Ω (at 500 VDC)
for input-output
Dielectric Strength 2,500 Vrms 1 minute
Operating Temperature Range –30°C to + 85°C no
Storage Temperature Range –40°C to +100°C frost
Case Color Black Red
Weight Approximately 3.5 g Approximately 2.9 g
• OUTPUT MODULE Standard Type
with zero
cross
without zero
cross
1/2 cycle
±1 ms
4
SN SERIES
Item AC Output module Remarks
INPUT Nominal Voltage (DC) 5 V, 12 V, 24 V
side
Operate Voltage Range ±20% of nominal voltage
Must Operate Voltage 80% of nominal voltage
Must Release Voltage Minimum 1 V
5 VDC Type
330 Ω ±10%
Input Impedance
12 VDC Type
1,0 k Ω ±10%
24 VDC Type
2,0 k Ω ±10%
OUTPUT Load Voltage DC3 to 30V
side
Maximum Load Current 1.0 A
see CHARACTERISTIC DATA
Minimum Load Current 1 mA
Switching Current 3 A (10 ms)
Max. Off-State Leakage Current
0.1 mA (at 30 VDC)
Max. On-State Voltage Drop 1.2 V
Maximum Operate Time max. 5 µs
Maximum Release Time max. 25 µs
Insulation Resistance Minimum 1,000 M Ω (at 500 VDC)
for input-output
Dielectric Strength 2,500 V rms 1 minute
Operating Temperature Range –40°C to + 100°C
Storage Temperature Range –30°C to + 85°C
Case Color Red
Weight Approximately 2.9 g
at DC 5 V 0.1A
• OUTPUT MODULE High Speed Switching Type
at max. load current
Item Input module Output module Note
Resistance (initial) Minimum 1,000 MΩ (500VDC) Input-output
Surge Voltage 2,500V rms 1 min.
n INSULATION
5
SN SERIES
3 V DD
4 OUT
5 GND
1(~)
Input
terminal
Photo-transistor coupler
Input
Circuit
Buffer
Circuit
AC Imput
Circuit
Condenser
Input
Input
terminal
3 V DD
4 OUT
5 GND
2(~)
1 (+/–)
2 (+/–)
( )
Buffer
Circuit
Output
terminal
Output
terminal
Photo-transistor coupler
n BLOCK DIAGRAM
• INPUT MODULE
• OUTPUT MODULE
LOAD INSULATION CIRCUITS
Input/Output waveform
(resistive load)
Photo-transistor
coupler
DC Logic
output
Photo-transistor
coupler
LOAD INSULATIONCIRCUITS
Input/Output waveform
(resistive load)
AC Photo-triac
coupler
DC Photo-transistor
coupler
n CHARACTERISTIC DATA
• OUTPUT MODULE
ON
OFF
“H”
“L”
Input signal
Output signal
“H”
“L”
ON
OFF
Input signal
Output signal
3+
Input
terminal Input
circuit
Photo-triac coupler
Photo-transistor coupler
Input
circuit
4–
3+
Input
terminal
Output
terminal
Output
terminal
4–
Trigger circuitDrive circuit
Snubber
circuit
Varistor
Output
transistor
Inverse
connection
protecting
diode
1
2
~
~
+1
–2
ON
OFF
Source voltage
of load
Input signal
Load current
ON
OFF
Input signal
Load current
* AC type without varistor / DC type with zenor diode available.
6
SN SERIES
n REFERENCE DATA
l INPUT MODULE
l OUTPUT MODULE
Distribution of Operate & Release Voltage
(AC Type)
High temperature Switching Test
(AC Type)
High temperature Continuous Operating Test
(AC Type)
Distribution of Operate & Release Voltage
(AC Type)
Distribution of Operate & Release Voltage
(DC Type)
Distribution of On-State Voltage Drop
(AC Type)
7
SN SERIES
n DIMENSIONS
l Dimensions l Schematics
(BOTTOM VIEW)
l PC board mounting
hole layout
(BOTTOM VIEW)
SN-A ( ) type (input module)
SN-D ( ) type (input module)
SN-A ( ) type (output module)
SN-( ) D, ( )D ( ) R type (output module)
Dotted line : Socket mounting SN-( )A-S type
Dotted line : Socket mounting SN-( )D-S type Unit: mm
* Reverse polarity type available
8
SN SERIES
n Socket Dimensions
n NOTES
1. Polarity of terminals is pre-determined. Please design your circuit accordingly.
2. Socket ordering code: JL-5N
3. Standard IC socket is not recommended. Please use socket “JL-5N”.
4. When switching inductive load by AC output module without varistor, please connect a varistor as shown in
drawing below.
5. AC input module has inside logic IC. Please connect bypass condenser (approx. 0.01µ) at pivotal points
between VDD and GND. (Conform to general handling instructions for logic IC.)
n Socket PC board
mounting
hole layout
Unit: mm
9
SN SERIES
1. General Information
l Relays produced after the specic date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l
It has been veried that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales ofce.
l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Prole
l Recommended solder paste Sn-3.0Ag-0.5Cu.
RoHS Compliance and Lead Free Relay Information
Reow Solder condition
3. Moisture Sensitivity
l Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
We highly recommend that you conrm your actual solder conditions
Flow Solder condition:
Pre-heating: maximum 120˚C
Soldering: dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration: maximum 3 sec.
10
SN SERIES
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://www.fujitsu.com/us/services/edevices/components/
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
Asia Pacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
Fujitsu Components International Headquarter Ofces
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its afliates reserve the right to change specications/datasheets without prior notice.
Rev. January 18, 2008.