SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A SN SERIES RoHS compliant n FEATURES l l l l l l l I/O modules for interface between CPU and external input devices or loads Ultra slim and light weight, SIL terminals type I/O modules for high density mounting --Size: 5 (W) x 20 (L) x 17 (H) mm --Weight: approximately 3.0 to 3.5 g High isolation by employing photo-coupled devices (between input and output: 2,500 V rms) Long life and maintenance free All solid state I/O module Compatible with NY relay size and terminals arrangement (only output module type) RoHS compliant since date code: 6703 (except 204-207) Please see page 9 for more information n ORDERING INFORMATION l Input module [Example] SN (a) - A 100 BF (b) (c) (a) Series Name SN : SN Series (b) Input Voltage A: AC type D: DC type (c) Nominal Voltage 100 BF: 100 VAC 200 BF: 200 VAC 12/24 B: 12/24 VDC 1 SN SERIES l Output module SN [Example] (a) - 12 D 01 HZ - C R T (b) (c) (d) (e) ( f ) (g) (h) (a) Series Name (b) Nominal Voltage (Input side) (c) Load Voltage A: AC type D: DC type (d) Load Current 01 : 1 A (e) Kinds of Inverse Connection Protecting Element AC type (f ) Zero Cross function (AC type) F : without zero cross function C : with zero cross function ( g) Output Polarity (DC type) Nil : Standard polarity R : Reverse polarity ( h) Switching Speed (DC type) Nil : Standard T : High speed type SN : SN Series 3: 3 VDC (only AC type) 5: 5 VDC 12: 12 VDC 24: 24 VDC DC type Nil : with varistor NV: without varistor Nil : Diode HZ: Zener diode n SPECIFICATIONS * INPUT MODULE (SN-( ) B Type) Item INPUT side OUTPUT side AC Input Module DC Input module 100 VAC type 200 VAC type 12/24 VDC type Input voltage range 80 to 132 Vrms 160to 265 Vrms 9.6 to 28.8 VDC Rating input current Approximately 7 mArms Power frequency range 47 to 63 Hz Must operate voltage (max.) 80 Vrms 160 Vrms 9.6 VDC Must release voltage (max.) 30 Vrms 60 Vrms 5.0 VDC Must release current (max.) 2 mArms DC supply voltage (VDD) 4 to 6 VDC Max. output current (VDD=5V) 4 mA Output logic Operate with negative true logic (active flow) Approx. 5 mA at Approx. 10 mA at 12 VDC 24 VDC - - 1.5 mA 0.4 mA Maximum operate time (max.) 25 ms 10ms Maximum release time (max.) 30 ms 10ms Insulation resistance (initial value) Minimum 1,000 M (at 500VDC) (for input-output) Dielectric strength 2,500 Vrms 1 minute (for input-output) Operating temperature range (no frost) -30C to +85C Storage temperature range (no frost) -40C to +100C Case color Yellow White Weight Approximately 2.0 g Approximately 3.3 g SN SERIES * OUTPUT MODULE Standard Type Item Remarks INPUT side OUTPUT side Max. Off-State AC Output module with zero without zero cross cross DC Output module Nominal Voltage (DC) 3 V, 5 V, 12 V, 24 V 5 V, 12 V, 24 V Operate Voltage Range 20% of nominal voltage Must Operate Voltage max.80% of nominal voltage Must Release Voltage Minimum 1 VDC (minimum 0.5 V*) 3 VDC Type 130 180 -- 5 VDC Type Input Impedance (10%) 12 VDC Type 330 470 390 1,0k 1,5k 1,2k 24 VDC Type 2,2k 3,0k Load Voltage Range 24 to 265 Vrms 3 to 30 VDC Maximum Load Current 1.0 Arms 1.0 A Minimum Load Current 10 mArms 1 mA Switching Current 50 A (60 Hz) 3 A (10 ms) Leakage Current 1.5 mArms (at 100 Vrms 60 Hz) 0.1 mA (at 30 VDC) 3.0 mArms (at 200 Vrms 60 Hz) Max. On-State Voltage Drop 1.2 Vrms *3 VDC type 2.4k see CHARACTERISTIC DATA 1.2 V at max. load current 1/2 cycle 1 ms 1 ms Maximum Operate Time (max.) 1 ms Maximum Release Time 1/2 cycle + 1ms Insulation Resistance Dielectric Strength Minimum 1,000 M (at 500 VDC) for input-output 2,500 Vrms 1 minute Operating Temperature Range -30C to + 85C no Storage Temperature Range -40C to +100C frost Case Color Black Weight Approximately 3.5 g Approximately 2.9 g 1 ms Red SN SERIES * OUTPUT MODULE High Speed Switching Type Item INPUT side OUTPUT side AC Output module Nominal Voltage (DC) 5 V, 12 V, 24 V Operate Voltage Range 20% of nominal voltage Must Operate Voltage 80% of nominal voltage Must Release Voltage Minimum 1 V 5 VDC Type Input Impedance 12 VDC Type 330 10% 1,0 k 10% 24 VDC Type 2,0 k 10% Load Voltage DC3 to 30V Maximum Load Current 1.0 A Minimum Load Current 1 mA Switching Current 3 A (10 ms) Max. Off-State Leakage Current 0.1 mA (at 30 VDC) Max. On-State Voltage Drop 1.2 V Remarks see CHARACTERISTIC DATA at max. load current Maximum Operate Time max. 5 s Maximum Release Time max. 25 s Insulation Resistance Dielectric Strength Minimum 1,000 M (at 500 VDC) for input-output 2,500 V rms 1 minute Operating Temperature Range -40C to + 100C Storage Temperature Range -30C to + 85C Case Color Red Weight Approximately 2.9 g at DC 5 V 0.1A n INSULATION Item Input module Resistance (initial) Minimum 1,000 M (500VDC) Output module Surge Voltage 2,500V rms 1 min. Note Input-output SN SERIES n BLOCK DIAGRAM * INPUT MODULE Input/Output waveform (resistive load) LOAD INSULATION CIRCUITS Photo-transistor coupler DC Logic output Photo-transistor coupler 1(~) Input terminal 2(~) AC Imput Circuit Condenser Input ( Photo-transistor coupler 3 V DD Buffer Circuit ) Output 4 OUT terminal 5 GND Photo-transistor coupler 1 (+/-) Input terminal 2 (+/-) Input Circuit 3 V DD Output 4 OUT terminal 5 GND Buffer Circuit ON Input signal OFF Output signal "H" "L" ON OFF Input signal Output signal "H" "L" * OUTPUT MODULE Input/Output waveform (resistive load) Photo-transistor coupler 3+ DC Photo-transistor coupler Input terminal Input circuit 4- Varistor 4- Snubber circuit Input circuit ~1 Inverse connection protecting diode Input terminal Output transistor Photo-triac coupler 3+ Drive circuit AC Photo-triac coupler Trigger circuit LOAD INSULATIONCIRCUITS Output terminal ~2 +1 Output terminal -2 Source voltage of load Input signal ON OFF Load current Input signal Load current ON OFF * AC type without varistor / DC type with zenor diode available. n CHARACTERISTIC DATA * OUTPUT MODULE SN SERIES n REFERENCE DATA l INPUT MODULE Distribution of Operate & Release Voltage (AC Type) l OUTPUT MODULE Distribution of Operate & Release Voltage (AC Type) High temperature Switching Test (AC Type) High temperature Continuous Operating Test (AC Type) Distribution of Operate & Release Voltage (DC Type) Distribution of On-State Voltage Drop (AC Type) SN SERIES n DIMENSIONS l Dimensions SN-A ( ) type (input module) l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) SN-D ( ) type (input module) SN-A ( ) type (output module) Dotted line : Socket mounting SN-( )A-S type SN-( ) D, ( )D ( ) R type (output module) * Reverse polarity type available Dotted line : Socket mounting SN-( )D-S type Unit: mm SN SERIES n Socket Dimensions n Socket PC board mounting hole layout Unit: mm n NOTES 1. Polarity of terminals is pre-determined. Please design your circuit accordingly. 2. Socket ordering code: JL-5N 3. Standard IC socket is not recommended. Please use socket "JL-5N". 4. When switching inductive load by AC output module without varistor, please connect a varistor as shown in drawing below. 5. AC input module has inside logic IC. Please connect bypass condenser (approx. 0.01) at pivotal points between VDD and GND. (Conform to general handling instructions for logic IC.) SN SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile Recommended solder paste Sn-3.0Ag-0.5Cu. l Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. SN SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 18, 2008. 10