Fundamental structure Characteristics Reliability Items Condition (V) Rated voltage Surface mount type SVPE SVPS SVPD SVPC SVPB SVPA SVQP Radial lead type SEPF SEPC SEQP SEP Catalog Deletion and EOL series 4.0 - 6.3 4.6 8.0 7.2 10 9.2 12.5 12 14 Packing specifications Fundamental structure haracteristics TPSF TPE TPB/TPC TPB/TPC TPLTPLF TPF TA Surface mount type TPG 3 10TPB33M 10 105 33 10 105 8.0 33.0 70 1100 3 3 6TPB68M 6.3 105 68 6.3 105 8.0 42.8 70 1100 3 3 4TPB68M 4.0 105 68 4.0 105 8.0 27.2 70 1100 3 3 105 220 105 10.0 220.0 40 2000 2a 33 to 470 Dissipation Factor (DF) 120Hz/20 Please see the attached characteristics list 10TPB150ML Rated voltage applied, after 5 minutes Please see the attached characteristics list 6TPB330ML 100kHz/20 Please see the attached characteristics list Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. 100kHz/20 10 105 150 6.3 105 330 6TPB330MAL 6.3 85 10 10 105 10.0 150.0 40 2000 3 2a 6.3 105 10.0 207.9 40 2000 3 2a 330 5.0 105 10.0 207.9 40 2000 3 2a 105 Z/Z20 0.6 to 2.0 6TPB220ML 6.3 105 220 6.3 105 10.0 138.6 40 2000 3 2a C/C Within20% of the initial value 4TPB330ML 4.0 105 330 4.0 105 10.0 132.0 40 2000 3 2a DF Rated temp. 85 products: 85, 1,000h, rated voltage applied < Within the initial limit C/C Within40%,-20% of the initial value 60, 90 to 95%RH, 500h, No-applied voltage DF 105, 1,000 cycles, 1kdischarge resistance, surge voltage applied 1.5 times of the initial limit LC < LC Surge D3L 10 0.6 to 2.0 105, 2,000h B2 size :105, 1,000h, Rated voltage applied Damp heat (Steady State) 10TPB220ML -55 Z/Z20 < 3 times of the initial limit Within5% of the initial value DF Within the initial limit LC D4 1.5 times of the initial limit C/C < 10TPB330M 10 105 330 10 105 10.0 330.0 35 3000 2a 10TPB220M 10 105 220 10 105 10.0 220.0 40 3000 3 2a 6TPB470M 6.3 105 470 6.3 105 15.0 296.1 35 3000 3 2a 6TPB330M 6.3 105 330 6.3 105 10.0 207.9 40 3000 3 2a 1 100k to 500kHz,45 Dimensions Size list RV L F 4.0 RV : Rated voltage 6.3 8.0 10.0 10 W S 33 B1 B1,B2 47 B1 B2 B2 D2 100 D2 150 D2 220 D3L D3L,D4 D2,D3L,D4 D4 330 Size code L 0.21 W 0.2 H 0.12 S 0.2 W1 0.1 B1 3.5 2.8 1.1 0.8 2.2 B2 3.5 2.8 1.9 0.8 2.2 D2 7.3 4.3 1.9 1.3 2.4 D3L 7.3 4.3 2.8 1.3 2.4 D4 7.3 4.3 3.8 1.3 2.4 1 0.3D3L, D4 2 0.2D3L, D4 B1 B2 470 D3L Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability SVPF SVPE SVPS SVPD SVPC SVPB SVPA SVQP SVP SEPF SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up 12.5 B1 D2 D2 Part number Maximum allowable MSL Rated Category Category LC ESR Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms temp. max temp. () F V max/5min. 100kHz/20 100kHz1 < (V) < B1 22 W1 S Size code B1 15 68 Image of case size 3 times of the initial limit TPC series characteristics list (unit: mm) TPH 3 120Hz/20 Reliability TPU 1100 Rated capacitance range (F) H Technical data Recommended soldering condition 70 M : 20 Marking Recommended land pattern dimension 47.0 120Hz/20 Selection guide Explanation of part numbers 8.0 () Guidelines and precautions for use Products list 105 -55 to 105 POSCAP Line-up Image of case size 10 - Leakage current 250 47 - Rated temp. 85 products:85 Series system diagram B2 105 (V) Endurance SVP Specifications 260 10 Category temperature range () Surge voltage Capacitance tolerance SVPF 10TPB47M Selection guide Specifications Part number Maximum allowable MSL Rated Category Category LC ESR Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms max () F V max/5min. 100kHz/20 100kHz1 <temp. <temp. (V) Technical data Recommended soldering condition Size code Series system diagram Surface mount type Packing specifications Radial lead type TPB series characteristics list Guidelines and precautions for use Radial lead type Packing specifications SMD type TPB series are the standard prosucts. TPC series are low-profile products derived from the TPB series. B2 size is the miniaturized version of TPB series. TPB/TPC Series D3L D4 D2 260 250 12TPC15M 12.5 85 15 10 105 10.0 18.8 80 800 3 3 12TPC10M 12.5 85 10 10 105 10.0 12.5 80 800 3 3 10TPC33MB 10 85 33 8.0 105 10.0 33.0 70 1000 3 3 8TPC22M 8.0 85 22 6.3 105 10.0 17.6 70 1000 3 3 6TPC47MB 6.3 85 47 5.0 105 10.0 29.6 70 1000 3 3 6TPC47M 6.3 85 47 5.0 105 10.0 29.6 55 1100 3 3 10TPC100M 10 105 100 10 105 10.0 100.0 45 1700 3 2a 10TPC68M 10 105 68 10 105 10.0 68.0 45 1700 3 2a 8TPC150M 8.0 105 150 8.0 105 10.0 120.0 40 1900 3 2a 6TPC330MA 6.3 85 330 5.0 105 10.0 207.9 40 1900 3 2a 6TPC150M 6.3 105 150 6.3 105 10.0 94.5 40 1900 3 2a 6TPC100M 6.3 105 100 6.3 105 10.0 63.0 45 1700 3 2a 1 100k to 500kHz,45 Guidelines and precautions for use Selection guide Products list Surface mount type OS-CON Line-up Series system diagram Image of case size Products list Explanation of part numbers Packing specifications Marking Technical data Image of case size Technical data Series system diagram Selection guide Guidelines and precautions for use TPB/TPCSeries RoHS compliance Standard Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability TPU TPH Surface mount type Surface mount type OS-CON Line-up TPG TPSF TPE TPB/TPC TPB/TPC TPLTPLF TPF TA TV TV TH TH TQC TQC Catalog Deletion and EOL models 96 Catalog Deletion and EOL models 97 Fundamental structure Characteristics Reliability Items Condition (V) Rated voltage Surface mount type SVPE SVPS SVPD SVPC SVPB SVPA SVQP Radial lead type SEPF SEPC SEQP SEP Catalog Deletion and EOL series 4.0 - 6.3 4.6 8.0 7.2 10 9.2 12.5 12 14 Packing specifications Fundamental structure haracteristics TPSF TPE TPB/TPC TPB/TPC TPLTPLF TPF TA Surface mount type TPG 3 10TPB33M 10 105 33 10 105 8.0 33.0 70 1100 3 3 6TPB68M 6.3 105 68 6.3 105 8.0 42.8 70 1100 3 3 4TPB68M 4.0 105 68 4.0 105 8.0 27.2 70 1100 3 3 105 220 105 10.0 220.0 40 2000 2a 33 to 470 Dissipation Factor (DF) 120Hz/20 Please see the attached characteristics list 10TPB150ML Rated voltage applied, after 5 minutes Please see the attached characteristics list 6TPB330ML 100kHz/20 Please see the attached characteristics list Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. 100kHz/20 10 105 150 6.3 105 330 6TPB330MAL 6.3 85 10 10 105 10.0 150.0 40 2000 3 2a 6.3 105 10.0 207.9 40 2000 3 2a 330 5.0 105 10.0 207.9 40 2000 3 2a 105 Z/Z20 0.6 to 2.0 6TPB220ML 6.3 105 220 6.3 105 10.0 138.6 40 2000 3 2a C/C Within20% of the initial value 4TPB330ML 4.0 105 330 4.0 105 10.0 132.0 40 2000 3 2a DF Rated temp. 85 products: 85, 1,000h, rated voltage applied < Within the initial limit C/C Within40%,-20% of the initial value 60, 90 to 95%RH, 500h, No-applied voltage DF 105, 1,000 cycles, 1kdischarge resistance, surge voltage applied 1.5 times of the initial limit LC < LC Surge D3L 10 0.6 to 2.0 105, 2,000h B2 size :105, 1,000h, Rated voltage applied Damp heat (Steady State) 10TPB220ML -55 Z/Z20 < 3 times of the initial limit Within5% of the initial value DF Within the initial limit LC D4 1.5 times of the initial limit C/C < 10TPB330M 10 105 330 10 105 10.0 330.0 35 3000 2a 10TPB220M 10 105 220 10 105 10.0 220.0 40 3000 3 2a 6TPB470M 6.3 105 470 6.3 105 15.0 296.1 35 3000 3 2a 6TPB330M 6.3 105 330 6.3 105 10.0 207.9 40 3000 3 2a 1 100k to 500kHz,45 Dimensions Size list RV L F 4.0 RV : Rated voltage 6.3 8.0 10.0 10 W S 33 B1 B1,B2 47 B1 B2 B2 D2 100 D2 150 D2 220 D3L D3L,D4 D2,D3L,D4 D4 330 Size code L 0.21 W 0.2 H 0.12 S 0.2 W1 0.1 B1 3.5 2.8 1.1 0.8 2.2 B2 3.5 2.8 1.9 0.8 2.2 D2 7.3 4.3 1.9 1.3 2.4 D3L 7.3 4.3 2.8 1.3 2.4 D4 7.3 4.3 3.8 1.3 2.4 1 0.3D3L, D4 2 0.2D3L, D4 B1 B2 470 D3L Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability SVPF SVPE SVPS SVPD SVPC SVPB SVPA SVQP SVP SEPF SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up 12.5 B1 D2 D2 Part number Maximum allowable MSL Rated Category Category LC ESR Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms temp. max temp. () F V max/5min. 100kHz/20 100kHz1 < (V) < B1 22 W1 S Size code B1 15 68 Image of case size 3 times of the initial limit TPC series characteristics list (unit: mm) TPH 3 120Hz/20 Reliability TPU 1100 Rated capacitance range (F) H Technical data Recommended soldering condition 70 M : 20 Marking Recommended land pattern dimension 47.0 120Hz/20 Selection guide Explanation of part numbers 8.0 () Guidelines and precautions for use Products list 105 -55 to 105 POSCAP Line-up Image of case size 10 - Leakage current 250 47 - Rated temp. 85 products:85 Series system diagram B2 105 (V) Endurance SVP Specifications 260 10 Category temperature range () Surge voltage Capacitance tolerance SVPF 10TPB47M Selection guide Specifications Part number Maximum allowable MSL Rated Category Category LC ESR Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms max () F V max/5min. 100kHz/20 100kHz1 <temp. <temp. (V) Technical data Recommended soldering condition Size code Series system diagram Surface mount type Packing specifications Radial lead type TPB series characteristics list Guidelines and precautions for use Radial lead type Packing specifications SMD type TPB series are the standard prosucts. TPC series are low-profile products derived from the TPB series. B2 size is the miniaturized version of TPB series. TPB/TPC Series D3L D4 D2 260 250 12TPC15M 12.5 85 15 10 105 10.0 18.8 80 800 3 3 12TPC10M 12.5 85 10 10 105 10.0 12.5 80 800 3 3 10TPC33MB 10 85 33 8.0 105 10.0 33.0 70 1000 3 3 8TPC22M 8.0 85 22 6.3 105 10.0 17.6 70 1000 3 3 6TPC47MB 6.3 85 47 5.0 105 10.0 29.6 70 1000 3 3 6TPC47M 6.3 85 47 5.0 105 10.0 29.6 55 1100 3 3 10TPC100M 10 105 100 10 105 10.0 100.0 45 1700 3 2a 10TPC68M 10 105 68 10 105 10.0 68.0 45 1700 3 2a 8TPC150M 8.0 105 150 8.0 105 10.0 120.0 40 1900 3 2a 6TPC330MA 6.3 85 330 5.0 105 10.0 207.9 40 1900 3 2a 6TPC150M 6.3 105 150 6.3 105 10.0 94.5 40 1900 3 2a 6TPC100M 6.3 105 100 6.3 105 10.0 63.0 45 1700 3 2a 1 100k to 500kHz,45 Guidelines and precautions for use Selection guide Products list Surface mount type OS-CON Line-up Series system diagram Image of case size Products list Explanation of part numbers Packing specifications Marking Technical data Image of case size Technical data Series system diagram Selection guide Guidelines and precautions for use TPB/TPCSeries RoHS compliance Standard Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability TPU TPH Surface mount type Surface mount type OS-CON Line-up TPG TPSF TPE TPB/TPC TPB/TPC TPLTPLF TPF TA TV TV TH TH TQC TQC Catalog Deletion and EOL models 96 Catalog Deletion and EOL models 97