DO NOT
SCALE FROM
THIS PRINT
.250 6.35
REF
.085 2.16
.025
SQ
0.64
REF
"A"
"A"
IPT1-50-D
C1
FIG.1
(IPT1-150-01-XX-D-XXX SHOWN)
(SEE NOTE 11)
.200 5.08
REF
((No OF POS x .1000 [2.540])
+ .0200[.508])
.010[.25]
.060 1.52
.100
REF
2.54
01
02
C
L
SEE NOTE 8
IPT1-1XX-XX-XX-D-XXX
No OF POS PER ROW
-02 THRU -50
ROW SPECIFICATION
(SEE NOTE 11)
-D: DOUBLE (USE IPT1-XX-D-XX-X)
PLATING SPECIFICATION
-S: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
LEAD STYLE
SEE TABLE 1, SHEET 2
OPTION
(SEE NOTE 11)
-POL: POSITION #1 REMOVED
(USE IPT1-XX-D-P)
-FL: FRICTION LOCK [POS -05 THRU -25]
(USE IPT1-XX-D-FL-X & T-1S64-XX-X)
.155 3.94
REF
.020 0.51
REF
.100 2.54
(TYP)
2
MAX SWAY
SECTION "A"-"A"
SEE TABLE 1
19
20
01
02
(IPT1-110-01-X-D-POL SHOWN)
-POL: POLARIZED OPTION
IPT1-XX-D-P
-FL: FRICTION LOCK OPTION
(IPT1-110-01-X-D-FL SHOWN)
T-1S64-06-X
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3]
2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
MATERIAL:
.100 DOUBLE ROW SHROUDED TERMINAL ASSEMBLY
BY:
IPT1-1XX-XX-XX-D-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
11-05-2002
2
1
SHEET SCALE: 1:0.4
INSULATOR: LCP, UL 94 VO
, COLOR: BLACK
CONTACT: PHOS BRONZE, 510, 3/4 HARD
F:\DWG\MISC\MKTG\IPT1-1XX-XX-XX-D-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE CUT FLASH: .010[.25].
3. MINIMUM TERMINAL PUSH OUT FORCE: 2 lbs.
4. MAXIMUM VARIATION BETWEEN PIN ROWS: .005[.13].
5. "END WALLS" AFTER CUTTING SHOULD BE .015+/-.003[.38+/-.08].
6. PARTS TO BE BULK PACKAGED.
7. ALL DIMENSIONS TO BE ABOUT CENTERLINE WITHIN +/-.005[.13].
8. PRESENCE OF VOIDS IS OPTIONAL AND PATTERN TO WHICH THEY
OCCUR IS VARIABLE.
9. -T PLATING OPTION AVAILABLE FOR EXISTING CUSTOMERS ONLY.
10. NOTE DELETED.
11. STANDARD BODIES CAN BE CUT TO POSITION.
FOR -POL & -FL OPTIONS, BODIES MUST BE MOLDED TO POSITION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION S
"B"
"C"
"B"
"B"
IPT1-XX-D-XX-X
HTSW-50-D-LCP
SEE TABLE1
FIG.2
(IPT1-110-02-XX-D-XXX SHOWN)
C2
.155 3.94
REF
SECTION "B"-"B"
SHEET OF
.100 DOUBLE ROW SHROUDED TERMINAL ASSEMBLY
BY:
IPT1-1XX-XX-XX-D-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
11-05-2002
2
2
SHEET SCALE: 2:1
REVISION S
F:\DWG\MISC\MKTG\IPT1-1XX-XX-XX-D-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
