Schraubanschlussklemmen, Raster 5,0 mm Screw terminal blocks, pitch 5.0 mm Borniers de raccordement a vis, pas 5,0 mm KRESS Schraubanschlussklemme, Klemmkorper mit Drahtschutz, stehend, teilungsgerecht anreihbar 1. Temperaturbereich -25 C/+125 C1 2. Werkstoffe Kontakttrager PA, V2 nach UL 94 Klemmkorper CuZn, unternickelt und verzinnt Drahtschutz CuSn, unternickelt und verzinnt Schraube Stahl, verzinkt und chromatiert 3. Mechanische Daten Schraube M2,6 Anzugsdrehmoment 0,4 Nm Anschliebare Leiter Schraubanschluss Massiv- oder Litzenleiter, mit oder ohne Aderendhulse Querschnitt 0,2-2,5 mm2 (AWG 12-22/24) Abisolierlange 7 1 mm 4. Elektrische Daten (bei TU 20 C) Bemessungsstrom 15 A bei TU 100 C (VDE), 10/20 A (UL)2 Bemessungsspannung3 250 V AC (VDE), 150/300 V (UL)2 Isolierstoffgruppe3 I (IEC)/0 (UL) (CTI 600) Kriechstrecke 4,3 mm Luftstrecke 4,3 mm Isolationswiderstand > 1 G 1 obere Grenztemperatur (Kontakttrager) RTI (elektr.) der UL Yellow Card 2 Spezifikation der Angaben nach UL auf Anfrage 3 nach IEC 60664/DIN EN 60664, CTI-UL-Klassifizierung nach ANSI/UL 746A *a KRESS Screw terminal block, clamp with wire protector, upright, consecutive placement without loss of pitch *a Bohrung der Leiterplatte O 1,3 mm bore hole of printed circuit board O 1.3 mm percage de la carte imprimee O 1,3 mm (R) (R) -Reg.-Nr. C999 1. Temperature range -25 C/+125 C1 2. Materials Insulating body PA, V2 according to UL 94 Clamp CuZn, pre-nickel and tin-plated Wire protector CuSn, pre-nickel and tin-plated Screw steel, zinck-plated and chromated 3. Mechanical data Screw M2.6 Tightening torque 0.4 Nm Connectable conductors screw terminal Solid or stranded wire, with or without wire end sleeve Section 0.2-2.5 mm2 (AWG 12-22/24) Stripping length 7 1 mm 4. Electrical data (at Tamb 20 C) Rated current 15 A at Tamb 100 C (VDE), 10/20 A (UL)2 Rated voltage3 250 V AC (VDE), 150/300 V (UL)2 Material group3 I (IEC)/0 (UL) (CTI 600) Creepage distance 4.3 mm Clearance 4.3 mm Insulation resistance > 1 G 1 upper limit temperature (insulating body) RTI (electr.) acc. to UL Yellow Card 2 specification of UL data upon request 3 acc. to IEC 60664/DIN EN 60664/CTI UL classification acc. to ANSI/UL KRESS Bestellbezeichnung Designation Designation Polzahl Poles Poles VE PU UE Abmessungen Dimensions Dimensions L (mm) KRESS KRESS KRESS KRESS KRESS KRESS KRESS KRESS KRESS KRESS KRESS KRESS 02 03 04 05 06 07 08 09 10 12 14 16 2 3 4 5 6 7 8 9 10 12 14 16 Verpackung: lose im Karton Packaging: in bulk, in a cardboard box Emballage: en vrac, dans un carton www.lumberg.com 200 200 200 200 200 200 200 200 200 200 200 100 10,0 15,0 20,0 25,0 30,0 35,0 40,0 45,0 50,0 60,0 70,0 80,0 Bornier de raccordement a vis, cage avec protege-fil, droite, emboitable sans perte de pas 1. Temperature d'utilisation -25 C/+125 C1 2. Materiaux Corps isolant PA, V2 suivant UL 94 Cage CuZn, sous-nickele et etame Protege-fil CuSn, sous-nickele et etame Vis acier, zingue et chromate 3. Caracteristiques mecaniques Vis M2,6 Couple de serrage de test 0,4 Nm Conducteurs raccordables a la borne Conducteur massif ou multibrin, avec ou sans embout Section 0,2-2,5 mm2 (AWG 12-22/24) Longueur de denudage 7 1 mm 4. Caracteristiques electriques (a Tamb 20 C) Courant assigne 15 A at Tamb 100 C (VDE), 10/20 A (UL)2 Tension assignee3 250 V AC (VDE), 150/300 V (UL)2 Groupe de materiau3 I (IEC)/0 (UL) (CTI 600) Distance d'isolement 4,3 mm Ligne de fuite 4,3 mm Insulation resistance > 1 G 1 temperature limite superieure (corps isolant) RTI (electr.) suivant UL Yellow Card 2 specification des donnees UL sur demande 3 suivant CEI 60664/DIN EN 60664, classification CTI UL suivant ANSI/UL 746A 12/2014