BD239C NPN power transistor Features NPN transistor Applications General purpose switching and amplifier transistor Description 1 The device is manufactured in Planar technology with "Base Island" layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage. The PNP type is the BD240C. Table 1. 2 3 TO-220 Figure 1. Internal schematic diagram Device summary Order code Marking Package Packaging BD239C BD239C TO-220 Tube July 2007 Rev 2 1/9 www.st.com 9 Electrical ratings 1 BD239C Electrical ratings Table 2. Absolute maximum rating Symbol Value Unit VCER Collector-emitter voltage (R BE = 100) 115 V VCEO Collector-base voltage (IB = 0) 100 V VEBO Emitter-base voltage (IC = 0) 5 V Collector current 2 A Collector peak current 4 A Base current 0.6 A PTOT Total dissipation at T case 25C 30 W PTOT Total dissipation at T amb 25C 2 W Tstg Storage temperature -65 to 150 C 150 C IC ICM IB TJ 2/9 Parameter Max. operating junction temperature BD239C 2 Electrical characteristics Electrical characteristics (Tcase = 25C unless otherwise specified) Table 3. Electrical characteristics Symbol ICES ICEO IEBO Parameter Collector cut-off current (VBE = 0) Collector cut-off current (IB = 0) Emitter cut-off current (IC = 0) Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) VCE(sat) (1) VBE (1) hFE Test Conditions Max. Unit VCE = 100V 0.2 mA VCE = 60V 0.3 mA VEB = 5V 1 mA IC = 30mA Collector-emitter saturation voltage IC = 1A Base-emitter voltage IC = 1A _ _ DC current gain Min. 100 _ IC = 0.2A Typ. IB = 0.2A 0.7 V VCE= 4V 1.3 V _ _ VCE = 4V 40 VCE = 4V 15 IC = 1A V Note (1) Pulsed duration = 300 s, duty cycle 1.5% 2.1 Electrical characteristic (curves) Figure 2. Safe operating area Figure 3. Derating curve 3/9 Electrical characteristics 4/9 BD239C Figure 4. DC current gain Figure 5. DC current gain Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage Figure 8. Base-emitter on voltage Figure 9. Resistive load switching time BD239C Electrical characteristics Figure 10. Resistive load switching time 2.2 Test circuit Figure 11. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 5/9 Package mechanical data 3 BD239C Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 BD239C Package mechanical data TO-220 Mechanical data DIM. mm. MIN. TYP MAX. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.49 0.70 D 15.25 15.75 D1 1.27 E 10 e 2.40 10.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 oP 3.75 3.85 Q 2.65 2.95 7/9 Revision history 4 BD239C Revision history Table 4. 8/9 Revision history Date Revision Changes 01-April-1999 1 Initial release. 02-Jul-2007 2 Figures 2,3,4,5,6,7,8,9 and figure 10 have been added. BD239C Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9