Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
1
Safety Relay on DIN-rail SR6 Z
n6 pole 8 A
nSR6 on printed circuit board
nAC / DC input
nScrewless clamp connectors
nModule width 46 mm
Applications
Elevator control, machine control
F0238-C
Terminal assignment
DC module, 4 NO+2 NC version
S0422-BA
DC module, 3 NO+3 NC version
S0422-BB
DC module, 5 NO+1 NC version
S0422-BC
AC/DC module, 4 NO+2 NC version
S0422-BD
AC/DC module, 3 NO+3 NC version
S0422-BE
AC/DC module, 5 NO+1 NC version
S0422-BF
Contact data
Contact set single contact, forcibly guided
type A according to EN50205
Rated voltage / max. switching voltage AC 250 VAC / 250 VAC
Rated current / limiting continuous current 8 A
Maximum breaking capacity AC 2000 VA
Contact material AgSnO2
Minimum contact load 10 mA / 5 V
Contact resistance w100 mOhm / 1 A / 24 VDC
w20 Ohm / 10 mA / 5 VDC
Rated frequency of operation with / without load 6 min-1 / 150 min-1
Coil data
DC energizing voltage Urtd 6, 12, 18, 21, 24, 36, 40, 48, 60, 115 VDC
AC/DC energizing voltage Urtd 12, 21, 24, 40, 48, 60,115 VAC/VDC
AC energizing voltage Urtd 230 VAC
Input circuit bridge rectifier, series resistor
Minimum operate voltage, % of rated coil voltage 90%
Minimum release voltage (+23°C), % of rated coil voltage 10%
Limiting voltage, % of rated coil voltage 110%
Insulation
Surge voltage resistance coil-contacts 3000 Vrms
open contact circuit 1000 Vrms
adjacent contacts 2000 Vrms
Clearance / creepage coil-contact W5.5 / 5.5 mm
adjacent contacts W3 / 3 mm
Insulation to IEC 60664
Voltage rating 250 V
Pollution degree 2
Overvoltage category III
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
2
SCHRACK
Safety Relay on DIN-rail SR6 Z (Continued)
Product key Typical product key SR6Z A 524
Type
SR6Z Safety Relay on DIN-rail SR6 Z
Contact configuration
A3 NO + 3 NC contacts (3 form A + 3 form B)
B4 NO + 2 NC contacts (4 form A + 2 form B)
C5 NO + 1 NC contacts (5 form A + 1 form B)
Coil
DC Coil code = rated coil voltage (e.g. 024=24 VDC)
AC/DC coil code: 524=24 VAC/VDC, 615=115 VAC/VDC
AC coil code: 730=230 VAC
Other types on request
Product key Type Contact configuration Contact material Coil Part number
SR6ZA024 6-pole 3 NO + 3 NC AgSnO224 VDC 7-1415033-1
SR6ZA524 safety contacts 24 VAC/VDC 9-1415059-1
SR6ZA615 relay module 115 VAC/VDC 1415060-1
SR6ZA730 230 VAC 1-1415060-1
SR6ZB024 4 NO + 2 NC 24 VDC 5-1415033-1
SR6ZB524 contacts 24 VAC/VDC 2-1415060-1
SR6ZB615 115 VAC/VDC 6-1415046-1
SR6ZB730 230 VAC 3-1415060-1
SR6ZC024 5 NO + 1 NC 24 VDC 3-1415042-1
SR6ZC524 contacts 24 VAC/VDC 4-1415060-1
SR6ZC615 115 VAC/VDC 5-1415060-1
SR6ZC730 230 VAC 6-1415060-1
Dimensions
S0423-A
Fit onto mounting rails according to
DIN EN 50022 or DIN EN 50035
Module width 46 mm
Module length 87 mm
Other data
Mechanical endurance 10x106cycles
Material
RoHS - Directive 2002/95/EC compliant
Environment
Ambient temperature -25...+50 °C
Processing
Connections (according IEC)
solid wire 0.2...2.5 mm2
stranded wire 0.2...2.5 mm2
AWG 28...14
Installation position any
Mounting in rows with zero spacing
Type of connection screwless clamp connectors
Relay weight 90 g
Packaging unit 2 pcs
