WL-8H100 - Omron Electronics - Datasheet.Support

WL WL

Fork

lock

lever

Roller

lever

Ordering Information

■ BASIC TYPE SIDE ROTARY SWITCHES

Actuator Part number

Complete Head with Lever Head Built-in switch Leverless

switch lever

Short (38 mm radius) WLCA2-TS WL-1H1100 WL-1A100 WL-1H W-10FB3 WLRCA2-TS

Medium (50 mm radius) WLCA2-7TS WL-1H1200 WL-1A200

Long (63 mm radius) WLCA2-8TS WL-1H1300 WL-1A300

Adjustable roller lever WLCA12-TS WL-1H2100 WL-2A100

Adjustable rod lever (140 mm) WLCL-TS WL-4H4100 WL-4A100 WL-4H WLRCL-TS

Left roller on front, WLCA32-41TS WL-5H5100 WL-5A100 WL-5H WLRCA32-TS

right roller on back

Left roller on back, WLCA32-42TS WL-5H5102 WL-5A102

right roller on front

Both rollers on front WLCA32-43TS WL-5H5104 WL-5A104

■ Rugged diecast housing

■ High mechanical strength

■ Oiltight, waterproof, dustproof

construction

■ Overtravel and high-precision types

available

■ Choose switches with neon lamp or

LED status indicator

Wide Selection of Two-Circuit

Double-Break Limit Switches

Robust General-Purpose Limit Switch WL

Total travel 45 degrees, with one-way operation option, 1/2-14NPT conduit (-TS type)

WL WL

Adj. rod

lever

Adj. roller

lever

■ OVERTRAVEL TYPE SIDE ROTARY SWITCHES

Actuator Part number

Complete Head with Lever Head Built-in switch Leverless

switch lever

Roller Short (38 mm radius), WLH2-TS WL-2H1100 WL-1A100 WL-2H W-10FB3 WLRH2-TS

lever standard sensitivity

Short, high sensitivity WLG2-TS W-10FB3-8 WLRG2-TS

Standard sensitivity WLH12-TS WL-2H2100 WL-2A100 W-10FB3 WLRH2-TS

High sensitivity WLG12-TS W-10FB3-8 WLRG2-TS

140 mm, std. sensitivity WLHL-TS WL-2H4100 WL-4A100 W-10FB3 WLRH2-TS

140 mm, high sensitivity WLGL-TS W-10FB3-8 WLRG2-TS

380 mm, std. sensitivity WLHAL4-TS WL-2H3100 WL-3A100 W-10FB3 WLRH2-TS

Spring rod lever WLHAL5-TS WL-2H3200 WL-3A200

Total travel 80 degrees, without one-way operation option, 1/2-14NPT conduit (-TS type)

■ OVERTRAVEL TYPE SIDE ROTARY SWITCHES

Actuator Part number

Complete Head with Lever Head Built-in switch Leverless

switch lever

Roller Short (38 mm radius) WLCA2-2NTS WL-6H1100 WL-1A100 WL-6H W-10FB3 WLRCA2-

lever 2NTS

A d j . r o l l e r lever WLCA12- WL-6H2100 WL-2A100 WLRCA12-

2NTS 2NTS

Adj. rod lever, 140 mm WLCL-2NTS WL-6H3100 WL-3A100 WLRCAL4-

2NTS

Total travel 90 degrees, with one-way operation option (-2N type), 1/2-14NPT conduit (-TS type)

Roller

lever

■ HIGH PRECISION TYPE SIDE ROTARY SWITCHES

Actuator Part number

Complete Head with Lever Head Built-in switch Leverless

switch lever

Short (38 mm radius) WLGCA2-TS WL-1H1100-1 WL-1A100 N/A W-10FB3-4 WLRGCA2-TS

Medium (50 mm radius) WLGCA2-7TS WL-1H1200-1 WL-1A200

Long (63 mm radius) WLGCA2-8TS WL-1H1300-1 WL-1A300

Adjustable roller lever WLGCA12-TS WL-1H2100-1 WL-2A100

Adjustable rod lever (140 mm) WLGCL-TS WL-4H4100-1 WL-4A100 WLRGCL-TS

Total travel 45 degrees, with one-way operation option, 1/2-14NPT conduit (-TS type)

WL WL

■ PLUNGER SWITCHES

Actuator Part number

Complete switch Head with actuator Built-in switch

Top plunger WLD-TS WL-7H100 W-10FB3

Top roller plunger WLD2-TS WL-7H200

Top sealed roller plunger WLD28-TS WL-7H400

Top ball plunger WLD3-TS WL-7H300

Horizontal plunger WLSD-TS WL-8H100 W-10FB3-4

Horizontal roller plunger WLSD2-TS WL-8H200

Horizontal ball plunger WLSD3-TS WL-8H300

1/2-14NPT conduit (-TS type)

■ COIL SPRING / STEEL WIRE SWITCHES

Actuator Part number

Complete switch Head with actuator Built-in switch

Coil spring, 6.5 mm dia. WNJ-TS WL-9H100 W-10FB3

Coil spring, 5.0 mm dia. WLNJ30-TS WL-9H200

Steel wire, 1.0 mm dia. WLNJ-S2TS WL-9H400

Nylon rod, 8.0 mm dia. WLNJ-2TS WL-9H300

1/2-14NPT conduit (-TS type)

■ STATUS INDICATOR EQUIPPED SWITCHES

Any of the WL switches above can be ordered with a neon or LED indicator that shows normally open and normally closed status. For a

neon indicator, add "-LE" to the end of a part number, for example, WLD2-TSLE. For an LED indicator, add "-LD" to the end of a part

number, for example, WLCA2-TSLD.

WL WL

■ MODEL NUMBER LEGEND

Base Units

WL - –

Identifier Symbol Definition

1 Electrical ratings None 10A, 125/250/480 VAC Rivet

01 0.1 A, 125/250 VAC Micro current/voltage crossbar

2 Head, actuator — See following "Head and Actuator Chart"

3 Corrosion None Non-corrosion-proof or acid-proof

RP Corrosion-proof type

P1 Acid-proof type

4 Built-in switch None W-10FB3 (standard type)

55 W-10FB3-55 (special hermetic type)

5 Operating temp. None -10°C to 80°C

TH 5°C to 120°C (high temp. type)

TC -40°C to 40°C (low temp. type)

6 Special hermetic None Without cable/no part is molded/standard switch (W-10FB3)

136 With 5M VCI cable pre-wired/conduit opening is resin-molded/standard built-in switch

(W-10FB3)

139 With 5M VCI cable pre-wired/conduit opening and case cover are resin-molded/standard

built-in switch (W-10FB3)

140 With 5M VCI cable pre-wired/special hermetic built-in switch (W-10FB3-55)

141 With 5M VCI cable pre-wired/conduit opening and case cover are resin-molded/special

hermetic built-in switch (W-10FB3-55)

RP40 With 5M S-flex cable pre-wired/conduit opening and case cover are resin-molded/special

hermetic built-in switch (W-10FB3-55)/special molding head

RP60 With 5M S-flex cable pre-wired/conduit opening and case cover are resin-molded/special

hermetic built-in switch (W-10FB3-55)/viton sealed

7 Conduit None PF 1/2 without Earth Terminal

G1 PF 1/2 with Earth Terminal

G PG 13.5 with Earth Terminal

Y M20 with Earth Terminal

TS 1/2-14NPT with Earth Terminal

8 Operating indicator None Without indicator

LE With neon indicator (125 to 250 VAC)

LD With LED indicator (10 to 115 VAC/VDC)

9 Lever clamping None With single nuts

A With double nuts

10 Spatter proof option None Non-spatter-proof type

S Spatter-proof type

11 Pre-wired connector/ None Screw terminal

receptacle option K13 4-pin receptacle (NO, DC type, wired no.3 & no.4)

K13A 4-pin receptacle (NO, AC type, wired no.3 & no.4)

K43 4-pin receptacle (DC type, all wired)

K43A 4-pin receptacle (AC type, all wired)

-M1J Pre-wired connector (4-pin, NO, DC type, wired no.3 & no.4, 0.3m cable)

-AGJ03 Pre-wired connector (4-pin, AC type, 0.3m cable)

-DGJ03 Pre-wired connector (4-pin, DC type, 0.3m cable)

2 34567891011

WL WL

Head and Actuator Chart

Symbol Definition

CA2 Roller lever, short (38 mm radius), with one-way operation option

CA2-7 Roller lever, medium (50 mm radius), with one-way operation option

CA2-8 Roller lever, long (63 mm radius), with one-way operation option

H2 Roller lever, short (38 mm radius), overtravel: 80 degrees

G2 Roller lever, short (38 mm radius), overtravel: 80 degrees, high sensitivity

CA2-2 Roller lever, short (38 mm radius), overtravel: 90 degrees

CA2-2N Roller lever, short (38 mm radius), overtravel: 90 degrees, with one-way operation option

GCA2 Roller lever, short (38 mm radius), high precision, with one-way operation option

GCA2-7 Roller lever, medium (50 mm radius), high precision, with one-way operation option

GCA2-8 Roller lever, long (63 mm radius), high precision, with one-way operation option

CA12 Adjustable roller lever, with one-way operation option

H12 Adjustable roller lever, overtravel: 80 degrees

G12 Adjustable roller lever, overtravel: 80 degrees, high sensitivity

CA12-2 Adjustable roller lever, overtravel: 90 degrees

CA12-2N Adjustable roller lever, overtravel: 90 degrees, with one-way operation option

GCA12 Adjustable roller lever, high precision

CL Adjustable rod lever (140 mm), with one-way operation option

HL Adjustable rod lever (140 mm), overtravel: 80 degrees

HLAL4 Adjustable rod lever (380 mm), overtravel: 80 degrees

GL Adjustable rod lever (140 mm), overtravel: 80 degrees, high sensitivity

CL-2N Adjustable rod lever (140 mm), overtravel: 90 degrees, with one-way operation option

HAL5 Spring rod lever, overtravel: 80 degrees

CA32-41 Fork lock lever, left roller on front, right roller on back, with one-way operation option

CA32-42 Fork lock lever, left roller on back, right roller on front, with one-way operation option

CA32-43 Fork lock lever, both rollers on front, with one-way operation option

D Top plunger

D2 Top roller plunger

D28 Top sealed roller plunger

D3 Top ball plunger

SD Horizontal plunger

SD2 Horizontal roller plunger

SD3 Horizontal ball plunger

NJ Coil spring, 6.5 mm dia.

NJ-30 Coil spring, 5.0 mm dia.

NJ-2 Nylon rod, 8.0 mm dia.

NJ-2S Steel wire, 1.0 mm dia.

WL WL

Rated

voltage Non-inductive load Inductive load

Resistive load Lamp load Inductive load Motor load

NC NO NC NO NC NO NC NO

125 VAC 10 A 10 A 3 A 1.5A 10 A 5 A 2.5 A

250 VAC 10 A 10 A 2 A 1 A 10 A 3 A 1.5 A

480 VAC 10 A 10 A 1.5 A 0.8 A 3 A 1.5 A 0.8 A

600 VAC 3 A 1 A 1 A 0.5 A 1.5 A 1 A 0.5 A

8 VDC 10 A 6 A 3 A 10 A 6 A

14 VDC 10 A 6 A 3 A 10 A 6 A

30 VDC 6 A 4 A 3 A 6 A 4 A

125 VDC 0.8 A 0.2 A 0.8 A 0.2 A

250 VDC 0.4 A 0.1 A 0.4 A 0.1 A

Microvoltage/Current Load Model (WL01



)

Note: 1. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).

2. Lamp load has an inrush current of 10 times the steady-state current.

3. Motor load has an inrush current of 6 times the steady-state current.

Construction

Too much Overtravel, adjustment needed.

Too little Overtravel, adjustment needed.

Normal operation

Operating Head

Roller lever, rod lever and side

plunger types may be locked in

at any of four 90° positions.

Proper Operation Zone Markers

Two raised markers on the shaft

housing indicate the proper limits

for normal operation to simplify

installation.

Axis Bearing

Assures smooth plunger movement.

Shaft Seal

O-ring provides a high

degree of sealing.

Built-in Switch

Long mechanical life of 15

million operations, minimum. Conduit Entrance

1/2-14 NPT

Roller

Sintered stainless steel with self-

lubricating bearing resists wear.

Lever

Aluminum alloy resists corrosion.

Roller Lever Mounting Screw

Cover Seal

O-ring provides a high

degree of sealing.

Terminal Screws

Four M4 screws

Insulation

Material provides insulation and

seals out corrosive gas.

Cover Mounting Screws

Self-retaining Phillips head

screws will not fall out.

Specifications

■ GENERAL RATINGS

Rated voltage Resistive Load

125 VAC 0.1 A

30 VDC

WL WL

■ EN60947-5-1 RATINGS

Current (mA)

Voltage (VDC)

Recommended Load Range (DC only)

Zones 1 through 3

Note: Without neon lamp model

Model Category and rating Thermal current (i the) Indicator

WLAC-15 2 A/250 VAC 10 A None

DC-12 2 A/48 VDC

WL01AC-14 0.1 A/125 VAC 0.5 A None

DC-12 0.1 A/48 VDC

WL-LE AC-15 2 A/250 VAC 10 A Neon lamp

WL01-LE AC-14 0.1 A/125 VAC 0.5 A Neon lamp

WL-LD AC-15 2 A/115 VAC 10 A LED

DC-12 2 A/48 VDC

WL01-LD AC-14 0.1 A/115 VAC 0.5 A LED

DC-12 0.1 A/48 VDC

WL WL

■ APPROVED STANDARDS

Approval Standard File no.

UL UL508 E76675

CSA CSA C22.2 no. 14 LR45746

TUV EN60947-5-1 R9551016

SEV SEV 93.5 51936.01

LR LR 88/10274 (E3)

■ CHARACTERISTICS

Operating speed 1 mm/s to 2 m/s (with WLCA2)

Operating frequency Mechanical 120 operations/min.

Electrical 30 operations/min.

Insulation resistance 100 MΩ min. (at 500 VDC)

Contact resistance 25 mΩ (initial)

Dielectric strength 1,000 VAC (600 VAC for overtravel model), 50/60 Hz for 1 min

between non-continuous terminals

2,200 VAC, 50/60 for 1 min between each terminal and non-current-

carrying metal part and between each terminal and ground

Rated impulse withstand voltage (Uimp)4 kV

Rated insulation voltage (Ui) 300 VAC (EN60947-5-1)

Thermal current (Ithe) 10 A (0.5 A for micro load type) (EN60947-5-1)

Short-circuit protective device 10 A fuse (type gG, IEC269 approved, EN60947-5-1)

Conditional short circuit current 100 A (EN60947-5-1)

Operating environment pollution degree 3 (EN60947-5-1)

Protection against electric shock Class I

Temperature rise 50° max

Vibration resistance Malfunction 10 to 55 Hz, 1.5 mm double amplitude

Shock resistance (See Note 1.) Destruction 1,000 m/s2 (approx. 100G)

Malfunction 300 m/s2 (approx. 30 G)

Ambient temperature Operating -10°C to 80°C (14°F to 176°F) with no icing

Ambient humidity Operating 95% max

Life expectancy Mechanical 15,000,000 operations min. (See Note 2.)

Electrical See

Engineering Data

Enclosure ratings UL Types 3, 4 and 13

NEMA Types 1, 2, 3, 3R, 4, 5, 6, 12 and 13

IEC IP67

Weight Approx. 275 g (with WLCA2)

Note: 1. Excludes the coil spring models (-NJ)

2. Overtravel model, low differential model, wobble stick model and micro load model: 10,000,000 operations min.

WL WL

■ OPERATING CHARACTERISTICS

Legend: OF = Operating Force (max.); RF = Reset Force (min.); OT = Overtravel (min.); PT = Pretravel

MD = Movement Differential (max.); OP = Operating Position; TT = Total Travel (min.); TTP = Total Travel Position (mm/inch)

Note: * Operating characteristics of WLCA-12-TS is measured at arm length of 38 mm (1.496 in).

** Operating characteristics of WLCL-TS is measured at the rod length of 140 mm (5.512 in)

*** Operating characteristics are measured at the tip of the coil spring or steel wire.

Part number Description OF RF OT PT MD OP TT(P)

WLCA2-TS Short roller lever 1.36 kg 227 g 30°15° ±5°12°—40°

(3 lb) (8.01 oz.)

WLCA2-7TS Medium roller lever 1.04 kg 170 g 30°15° ±5°12°—40°

(2.3 lb) (6.00 oz.)

WLCA2-8TS Long roller lever 820 g 137 g 30°15° ±5°12°—40°

(28.92 oz.) (4.83 oz.)

WLCA12-TS* Adjustable roller 1.36 kg 227 g 30°15° ±5°12°—40°

lever (3 lb) (8.01 oz.)

WLCL-TS** Adjustable rod 142 g 28 g 30°15° ±5°12°—40°

lever (5.00 oz.) (0.99 oz.)

WLCA32-41TS Fork roller lever, 1.2 kg — 35°50° ±5°—— 90° ±10°

left front, right back (2.7 lb)

WLCA32-42TS Fork roller lever, 1.2 kg — 35°50° ±5°—— 90° ±10°

left back, right front (2.7 lb)

WLCA32-43TS Fork roller lever, 1.2 kg — 35°50° ±5°—— 90° ±10°

both on front (2.7 lb)

WLD-TS Plain top plunger 2.72 kg 910 g 6.4 mm 1.7 mm 1 mm 34 ±0.8 mm 29.5 mm

(6 lb) (2.01 lb) (0.252 in) (0.067 in) (0.04 in) (1.34 ±0.03 in) (1.16 in)

WLD2-TS Top roller plunger 2.72 kg 910 g 5.6 mm 1.7 mm 1 mm 44 ±0.8 mm 39.5 mm

(6 lb) (2.01 lb) (0.220 in) (0.067 in) (0.04 in) (1.73 ±0.03 in) (1.56 in)

WLD28-TS Top sealed roller 1.7 kg 450 g 5.6 mm 1.7 mm 1 mm 44 ±0.8 mm 39.5 mm

plunger (3.75 lb) (15.87 oz.) (0.220 in) (0.067 in) (0.04 in) (1.73 ±0.03 in) (1.56 in)

WLD3-TS Top ball plunger 2.72 kg 910 g 4 mm 1.7 mm 1 mm 44.5 ±0.8 mm 41 mm

(6 lb) (2.01 lb) (0.157 in) (0.067 in) (0.04 in) (1.75 ±0.03 in) (1.61 in)

WLSD-TS Horizontal plain 4.082 kg 907 g 6.4 mm 2.8 mm 1 mm 40.6 ±0.8 mm —

plunger (9.01 lb) (2.00 lb) (0.252 in) (0.110 in) (0.04 in) (1.60 ±0.03 in)

WLSD2-TS Horizontal roller 4.082 kg 907 g 5.6 mm 2.8 mm 1 mm 54.2 ±0.8 mm —

plunger (9.01 lb) (2.00 lb) (0.220 in) (0.110 in) (0.04 in) (2.13 ±0.03 in)

WLSD3-TS Horizontal ball 4.082 kg 907 g 4 mm 28 mm 1 mm 54.2 ±0.8 mm —

plunger (9.01 lb) (2.00 lb) (0.157 in) (0.110 in) (0.04 in) (2.13 ±0.03 in)

WLNJ-TS*** Coil spring, 150 g — — 20 mm ±10 mm — — —

6.5 mm dia. (5.29 oz.) (0.79 ±0.39 in)

WLNJ30-TS*** Coil spring, 150 g — — 20 mm ±10 mm — — —

5.0 mm dia. (5.29 oz.) (0.79 ±0.39 in)

WLNJ-S2TS*** Steel wire 29 g — — 40 mm ±20 mm — — —

(1.02 oz.) (1.58 ±0.79 in)

WLNJ-2TS*** Nylon rod 150 g — — 40 mm ±20 mm — — —

(5.29 oz.) (1.58 ±0.79 in)

WL WL

Engineering Data

■ ELECTRICAL LIFE EXPECTANCY

Switching current (mA)

Life expectancy (x 10

operations)

Operation

■ CONTACT FORM

Standard/microload models

SPST-NO model

(4) (3) NO

(1) (2)

NO NO

■ CONTACT RATINGS

NEMA A600 for SPDT switches without status

indicators:

10 A at 125, 250, 480 VAC

1/2 HP at 125 VAC, 1 HP at 250 VAC

0.8 A at 125 VDC, 0.4 A at 250 VDC

0.1 A at 600 VDC

NEMA A300 for SPDT switches with neon status

indicator type

■ CONTACT RESISTANCE

25 mΩ max (initial)

■ ELECTRICAL APPROVALS

UL Recognized, File No. E76675

CSA Certified, File No. LR45746

WL WL

Actuators for rotary switches such as

WLCA❑-TS roller lever and WLCL-TS rod

lever switches can be positioned within a

360° range. Loosen the Allen-head set bolt

on the side of the actuator, position the

actuator, then tighten in place.

Actuator lever

can be installed

at any angle in

360°.

■ ROTARY ACTUATOR POSITIONING

The operating head of many switches can

be set to four 90° positions to match

installation requirements. Loosen the four

Phillips head screws on the operating

head, and lift the head off. Then, position

with the shaft in the desired direction.

Replace the four screws to fasten the

operating head. Applicable switches

include those with roller levers (WLCA❑-

TS), rod levers (WLCL-TS), horizontal

plungers (WLSD❑-TS) and roller plungers

(WLD2-TS and WLD28-TS).

■ OPERATING HEAD POSITIONING

Example of roller lever, rod lever and

horizontal plunger switches

Head

Loosen the screws

Example of roller plunger switches

Rotary actuator switches can be set for

clockwise (CW), counterclockwise (CCW) or

operation both ways (CW+CCW). To change

the operating direction, loosen the four

screws on the switch head. Then, lift off the

head. The plunger marker inside is set

parallel with the face plate, as shown at right.

Turn the plunger so the marking faces left for

CW or right for CCW as shown. Replace the

actuator head in the direction suitable for the

installation and tighten the four screws.

■ OPERATING DIRECTION OF STANDARD SWITCHES

Operates

CCW

90° operation

to left

CW+CCW

(both ways

operation)

Operates

90° operation

to right

Operates

■ ROLLER LEVER ACTUATOR POSITIONING

The roller(s) on roller lever actuators may

be faced inward toward the operating head

or use the more typical installation with the

roller lever facing away from the body. To

change the actuator position, loosen the

Allen-head set bolt, pull the actuator off,

and reposition it on the shaft. Then, tighten

the set bolt at the desired angle.

Loosen the

Allen-head

set bolt

■ FORK ROLLER LEVER ACTUATORS

The illustration at right indicates the

differences among the fork lever actuators.

All may be reversed as shown above.

WL WL

■ STATUS INDICATOR EQUIPPED SWITCH OPERATION

WL switches are available with neon lamp

(WL❑❑❑❑-TS-LE) or LED (WL❑❑❑❑-TS-

LD) status indicators for easy monitoring

and troubleshooting. They come factory-

set for Normally Open operation ON. It is

easy to change the status to Normally

Closed operation ON. See the Installation

section for details.

Part number Indicator type Rated voltage Leakage current

WL❑❑❑❑-TS-LE Neon lamp 125 VAC Approx. 0.6 mA

250 VAC Approx. 1.9 mA

WL❑❑❑❑-TS-LD LED 10 to 115 VAC Approx. 1 mA

10 to 115 VDC

Factory

installed

position

for

Normally

Open ON

Indicator lights

when NC contacts

release (when

actuator rotates or

is pushed down)

Indicator is lit

while actuator is

free, then goes off

when NO contacts

close: when

actuator rotates or

is pushed down

When connecting a limit switch to a

programmable controller, select the neon

lamp or LED with the smallest leakage

current. Refer to the table at right.

To change operation to Normally Closed

ON, remove the cover from the switch

body, and rotate lamp holder 180°. Then,

replace the unit in the housing.

Switches with adjustable lever and rod

actuators can be set to desired length by

loosening the Allen-head set screw, setting

the length. Then tighten the set screw.

Rod lever switch Adjustable roller lever switch

■ ADJUSTING LEVER AND ROD LENGTH

WL WL

■ LIMIT SWITCHES

Unit: mm (inch)

WLCA2-TS Short Roller Lever Switch

WLCA2-7TS Medium Roller Lever Switch

Dimensions

WLCA2-8TS Long Roller Lever Switch

WL WL

WLCA32-41, WLCA32-42, WLCA32-43 Fork Roller Lever Switches

Unit: mm (inch)

WLCL-TS Adjustable Rod Lever Switch

WLCA12-TS Adjustable Roller Lever Switch

WL WL

WLD-TS Plain Plunger Switch

WLD2-TS Roller Plunger Switch

WLD28-TS Sealed Roller Plunger Switch

WLD3-TS Ball Plunger Switch

WL WL

WLSD3-TS Horizontal Ball Plunger Switch

Unit: mm (inch)

WLSD2-TS Horizontal Roller Plunger Switch

WLSD-TS Horizontal Plain Plunger Switch

WL WL

WLNJ-TS Coil Spring Switch

WLNJ-S2TS Steel Wire Switch

WLNJ30-TS Coil Spring Switch

WL WL

Overtravel Type

Standard Limit Switches Overtravel Limit Switches

Overtravel type limit switches offer a longer

overtravel (OT) to accommodate different

cam shapes. The key difference between

"standard" and "overtravel" is in the angle

of operation: overtravel types can operate

at 90° on either side of the center point.

Standard types are recommended for

operation at 45° on either side of the center

point. However, overtravel type switches

cannot be expected to provide 90°

operation on only one side.

Customized Models

Installation

■ MOUNTING HOLES

Most WL Switches

WLNJ-2TS Nylon Rod Switch

Unit: mm (inch)

WL WL

■ DIMENSIONS

Unit: mm (inch)

WLCA2-2TS Short Roller Lever Overtravel Switch

WLCA12-2TS Adjustable Roller Lever Overtravel Switch

Note:

Levers for WLCAL4-2-TS and WLCAL5-2-TS have a large tare, so positioning the actuator with the bottom up will reduce chattering.

Operating characteristics of WLCA12-2-TS are measured at arm length of 38 mm (1.29 in).

Operating characteristics of WLCL-2-TS are at arm length of 140 mm (5.51 in)

Operating characteristics of WLCAL4-2-TS are measured at rod length of 380 mm (1.25 ft)

Operating characteristics of WLCAL5-2-TS are measured at rod length of 412.5 mm (1.35 ft)

Legend: OF = Operating Force (max.); RF = Reset Force (min.); OT = Overtravel (min.); PT = Pretravel

MD = Movement Differential (max.); OP = Operating Position; TT = Total Travel (min.)

■ OPERATING CHARACTERISTICS

Part number Description OF RF OT PT MD TT

WLCA2-2-TS Short roller lever 900 g (31.74 oz.) 50 g (1.76 oz.) 60°25° ±5°16°90°

WLCA12-2-TS Adjustable roller lever 900 g (31.74 oz.) 50 g (1.76 oz.) 60°25° ±5°16°90°

WLCL-2-TS Adjustable rod lever, 140 mm L 260 g (9.17 oz.) 10 g (0.35 oz.) 60°25° ±5°16°90°

WLCAL4-2-TS Adjustable rod lever, 380 mm L 80 g (2.82 oz.) 8 g (0.28 oz.) 60°25° ±5°16°90°

WLCAL5-2-TS Spring 80 g (2.82 oz.) 8 g (0.28 oz.) 60°25° ±5°16°90°

WL WL

WLCAL5-2TS Adjustable Spring Lever Overtravel Switch

Unit: mm (inch)

WLCAL4-2TS Long Adjustable Rod Lever Overtravel Switch

WLCL-2TS Adjustable Rod Lever Overtravel Switch

WL WL

Legend: OF = Operating Force (max.); RF = Reset Force (min.); OT = Overtravel (min.); PT = Pretravel;

MD = Movement Differential (max.)

■ OPERATING CHARACTERISTICS

Part number Description OF RF OT PT MD

WLGCA2-TS Short roller lever 1.3 kg (47.97 oz.) 150 g (5.29 oz.) 40°5° (+2°/-0°)3°

WLGCA2-2-TS Overtravel short roller lever 900 g (31.74 oz.) 50 g (1.76 oz.) 85°8° max. 3°

WLGCA2-7-TS Medium roller lever 1.04 kg (36.68 oz.) 110 g (3.88 oz.) 40°5°3°

WLGCA2-8-TS Long roller lever 820 g (28.92 oz.) 90 g (3.17 oz.) 40°5°3°

WLGCA12-TS Adjustable roller lever 1.36 kg (47.97 oz.) 150 g (5.29 oz.) 40°5° (+2°/-0°)3°

WLGCL-TS Adjustable rod lever, 140 mm L 400 g (14.1 oz.) 10 g (0.35 oz.) 40°5° (+2°/-0°)3°

Note:

Operating characteristics of WLGCA12-TS are measured at arm length of 38 mm (1.29 in).

Operating characteristics of WLGCL-TS are at arm length of 140 mm (5.51 in)

■ DIMENSIONS

Unit: mm (inch)

WLGCA2-TS Short Roller Lever High Precision Switch

The key differences between "high-

precision" and "standard" limit switches

are in the pretravel (PT) ratings and the

repeat accuracy. High-precision

switches have a pretravel (PT) of 5°

compared to 20° for standard switches.

The repeat accuracy is best compared by

referring to the graph at right. High-

precision switches are ideal for position-

ing control in machine tools and other

applications.

High-Precision Type

WL WL

WLGCA2-8TS Long Roller Lever High Precision Switch

Unit: mm (inch)

WLGCA2-7TS Medium Roller Lever High Precision Switch

WLGCA2-2TS Short Overtravel Roller Lever High Precision Switch

WL WL

WLGCL-TS Adjustable Rod Lever High Precision Switch

WLGCA12-TS Adjustable Roller Lever High Precision Switch

WL WL

OMRON ELECTRONICS LLC OMRON CANADA, INC.

One East Commerce Drive 885 Milner Avenue

Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8

1-800-55-OMRON 416-286-6465

Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. Printed in the U.S.A.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.omron.com/oei

Canada - http://www.omron.com/oci