TH97/2478 www.eicsemi.com SMBJ 5.0 - 188A TH09/2479 IATF 0113686 SGS TH07/1033 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB (DO-214AA) Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 600 W FEATURES : * 600W peak pulse power capability with a 10/1000s waveform * Excellent clamping capability * Very fast response time * Pb / RoHS Free 4.65 0.30 5.30 0.22 1.14 0.38 0.1 0.1 0.22 0.07 2.1 0.15 2.28 0.15 3.62 0.32 MECHANICAL DATA * Case : SMB Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.108 gram Dimensions in millimeters DEVICES FOR BIPOLAR APPLICATIONS For Bi-directional use C or CA Suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 C ambient temperature unless otherwise specified. Rating Symbol Value Units PPPM Minimum 600 W IPPM See Table A IFSM 100 A Maximum Instantaneous Forward Voltage at IF = 50A VFM 3.5 V Typical Thermal resistance, Junction to ambient RJA 100 C/W TJ, TSTG - 55 to + 150 C Peak Pulse Power Dissipation on 10/1000s waveform Peak Pulse Current on 10/1000s waveform (1) (1)(2) (Fig. 3) (Fig. 5) Maximum Peak forward Surge Current 8.3 ms single half sine-wave superimposed on rated load ( JEDEC Method ) (2) Operating Junction and Storage Temperature Range Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal. Page 1 of 4 Rev. 08 : September 28, 2012 TH97/2478 www.eicsemi.com TH09/2479 IATF 0113686 SGS TH07/1033 ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified Breakdown Voltage @ IT (1) Reverse Stand-off Voltage Maximum Reverse Leakage @ VWM Maximum Peak Pulse Surge Current VWM (V) IR (3) (A) IPPM (2) (A) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 800 800 800 800 500 500 200 200 100 100 50 50 10 10 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 62.5 65.2 52.6 58.3 48.7 53.6 45.1 50.0 42.0 46.5 40.0 44.1 37.7 41.7 35.5 39.0 31.9 35.3 29.9 33.0 27.3 30.2 25.2 27.9 23.3 25.8 22.3 24.0 20.8 23.1 19.7 21.7 18.6 20.5 16.7 18.5 15.2 16.9 14.0 15.4 12.4 14.2 12.0 13.2 11.2 12.4 10.2 11.3 9.3 10.3 Type No. VBR (V) SMBJ5.0 SMBJ5.0A(4) SMBJ6.0 SMBJ6.0A SMBJ6.5 SMBJ6.5A SMBJ7.0 SMBJ7.0A SMBJ7.5 SMBJ7.5A SMBJ8.0 SMBJ8.0A SMBJ8.5 SMBJ8.5A SMBJ9.0 SMBJ9.0A SMBJ10 SMBJ10A SMBJ11 SMBJ11A SMBJ12 SMBJ12A SMBJ13 SMBJ13A SMBJ14 SMBJ14A SMBJ15 SMBJ15A SMBJ16 SMBJ16A SMBJ17 SMBJ17A SMBJ18 SMBJ18A SMBJ20 SMBJ20A SMBJ22 SMBJ22A SMBJ24 SMBJ24A SMBJ26 SMBJ26A SMBJ28 SMBJ28A SMBJ30 SMBJ30A SMBJ33 SMBJ33A SMBJ36 SMBJ36A Page 2 of 4 Min. Max. IT (mA) 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 7.82 7.07 8.15 7.37 8.82 7.98 9.51 8.6 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38 34.4 40.7 36.8 44.9 40.6 48.9 44.2 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Maximum Clamping Voltage @ IPPM VC (V) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 Rev. 08 : September 28, 2012 TH97/2478 www.eicsemi.com TH09/2479 IATF 0113686 SGS TH07/1033 ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified Breakdown Voltage @ IT (1) Reverse Stand-off Voltage Maximum Reverse Leakage @ VWM Maximum Peak Pulse Surge Current VWM IR (3) (A) IPPM (2) (A) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 8.4 9.3 7.8 8.6 7.5 8.3 7.0 7.7 6.6 7.3 6.2 6.9 5.8 6.4 5.6 6.2 5.3 5.8 4.8 5.3 4.5 4.9 4.3 4.7 3.9 4.4 3.8 4.1 3.4 3.7 3.0 3.4 2.8 3.1 2.6 2.9 2.2 2.5 2.1 2.3 2.0 2.2 1.7 2.0 Type No. VBR (V) Min. Max. IT (mA) (V) SMBJ40 44.4 54.3 1.0 40 SMBJ40A 44.4 49.1 1.0 40 SMBJ43 47.8 58.4 1.0 43 SMBJ43A 47.8 52.8 1.0 43 SMBJ45 50.0 61.1 1.0 45 SMBJ45A 50.0 55.3 1.0 45 SMBJ48 53.3 65.1 1.0 48 SMBJ48A 53.3 58.9 1.0 48 SMBJ51 56.7 69.3 1.0 51 SMBJ51A 56.7 62.7 1.0 51 SMBJ54 60.0 73.3 1.0 54 SMBJ54A 60.0 66.3 1.0 54 SMBJ58 64.4 78.7 1.0 58 SMBJ58A 64.4 71.2 1.0 58 SMBJ60 66.7 81.5 1.0 60 SMBJ60A 66.7 73.7 1.0 60 SMBJ64 71.1 86.9 1.0 64 SMBJ64A 71.1 78.6 1.0 64 SMBJ70 77.8 95.1 1.0 70 SMBJ70A 77.8 86.0 1.0 70 SMBJ75 83.3 102 1.0 75 SMBJ75A 83.3 92.1 1.0 75 SMBJ78 86.7 106 1.0 78 SMBJ78A 86.7 95.8 1.0 78 SMBJ85 94.4 115 1.0 85 SMBJ85A 94.4 104 1.0 85 SMBJ90 100 122 1.0 90 SMBJ90A 100 111 1.0 90 SMBJ100 111 136 1.0 100 SMBJ100A 111 123 1.0 100 SMBJ110 122 149 1.0 110 SMBJ110A 122 135 1.0 110 SMBJ120 133 163 1.0 120 SMBJ120A 133 147 1.0 120 SMBJ130 144 176 1.0 130 SMBJ130A 144 159 1.0 130 SMBJ150 167 204 1.0 150 SMBJ150A 167 185 1.0 150 SMBJ160 178 218 1.0 160 SMBJ160A 178 197 1.0 160 SMBJ170 189 231 1.0 170 SMBJ170A 189 209 1.0 170 SMBJ188 209 255 1.0 188 SMBJ188A 209 231 1.0 188 Notes: (1) Pulse test : tp 50ms. (2) Surge Current Waveform per Figure 5 and Derate per Figure 1 (3) For bi-directional types have VWM of 10 Volts and less, the IR limit is doubled (4) For the bi-directional SMBJ5.0CA, the maximum VBR is 7.25V (5) "SMBJ" will be omitted in marking on the diode. Page 3 of 4 Maximum Clamping Voltage @ IPPM VC (V) 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 344 328 Rev. 08 : September 28, 2012 TH97/2478 www.eicsemi.com IATF 0113686 SGS TH07/1033 TH09/2479 RATING AND CHARACTERISTIC CURVES ( SMBJ5.0 - SMBJ188A ) FIG.2 - MAXIMUM NON-REPETITIVE PERK FORWARD SURGE CURRENT 120 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 0 0 25 50 75 100 125 150 100 50 10 175 TJ = TJmax 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 200 1 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL JUNCTION CAPACITANCE FIG.4 - PEAK PULSE POWER RATING CURVE 10 6,000 PP,PEAK POWER (kW) VR Measured @ Zero Basic (0V) CJ, CAPACITANCE, pF 4 2 Ta, AMBIENT TEMPERATURE, ( C) 1,000 VR Measured @ Stand-off voltage 100 TJ = 25 C f = 1.0 MHz Vsig = 50 mVP-P 10 1.0 0.1 0.1s 1.0s 10s 100s 1.0ms 10 1 2 10 100 20 20 10ms td, PULSE WIDTH, SEC. VR, REVERSE STAND OFF VOLTAGE,VOLTS IPPM, PEAK PULSE CURRENT, % FIG.5 - PULSE WAVEFORM tr 10s 100 Peak Value IPPM Ta=25 C Pulse Width (td) is defined as that point where the peak current decays to 50% of IPPM Half Value - IPPM 2 50 10/1000ms. Waveform as defined by R.E.A. 0 td 0 1.0 2.0 3.0 4.0 t, TIME(ms) Page 4 of 4 Rev. 08 : September 28, 2012