THERMOTAB
TO-220AB
TO-202AB
TO - 92
Selected Packages*
U.L. RECOGNIZED
File #E71639
AK
G
Teccor Electronics, Inc. 5-1 Sensitive SCRs
(972) 580-7777
Sensitive SCRs
(0.8 – 10 Amps)
5
General Description
The Teccor Elec tronics , I nc. line of sensiti ve S CR sem iconduc-
tors are half-wave unidirectional gate-controlle d rectifiers (SCR -
thyristor) which complem ent Teccor's line of power SCRs. This
group of packages offers ratings of 0 .8-10 amps, and 50-600
volts wit h gate sensitivities of 12-500 microamps. If gat e currents
in the 10-50 milliamp ranges are re quired, ple ase consult Tec-
cor's non-sensitive SCR technical data sheet s.
Electrical ly Isolated Packages
This group of Teccor sensitive SCRs is a vailable in a choice of
three different product packages. The TO-220AB and TO-92 are
electr ical ly isolated where t he case or tab is interna lly isolated to
allow the use of low cost assem bly and convenient packaging
techniques.
Glass Passivation
Teccor' s line of SCRs feature s g lass -passiva ted junctions to
ensure long te rm device reliabil ity an d param eter stabil ity. Tec-
cor's glas s offers a rugged, r eli able barrier agai nst junction con-
tamination.
Tape-and-reel packaging i s avail able for the TO-92 package.
Please cons ult factor y f or more informa tion.
Variations of devic es covered in this da ta sheet ar e avail able f o r
custom desi gn applicat ions. Plea se consult the factor y for more
information.
Features
• Electr ically-isolated To-220AB package
• High Voltage Capability up to 600 Vol ts
• High Surge Capability — up to 100 Amps
• Glass Chip Passivation
Electrical Specifications
Sensitive SCRs 5-2 Teccor Electronics, Inc.
(972) 580-7777
See General Notes and Electrical Specifications Notes on page 5-4.
TYPE
Part Number IT
VDRM &
VRRM IGT
IDRM &
IRRM VTM VGT IH
TO-92
Maximum
On-state
Current
(1)
Amps
Repetitive
Peak
Off-state
Forward &
Reverse
Voltage
Volts
DC Gate
Trigger
Current
(2) (11) (17)
µAmps
Peak Off-state
Current at
VDRM & VRRM
(19)
µAmps
Peak
On-state
Voltage
TC = 25°C
(3) (10)
Volts
DC Gate
Trigger Voltage
(4) (11)
Volts
DC Holding
Current
Initial
On-state
Current
=20mAmps
(5) (14)
(18)
mAmps
See “Package
Dimensions”
section for
variations.
RMS AV TC =
25°C TC=
100°C TC =
125°C TC =
- 65°C TC =
25°C TC =
100°C
MAX MIN MAX MAX MAX MAX MIN MAX
0.8
Amp
EC103A 0.8 0.51 100 200 1.0 50 1.7 1.2 0.8 .25 5.0
EC103B 0.8 0.51 200 200 1.0 50 1.7 1.2 0.8 .25 5.0
EC103C 0.8 0.51 300 200 1.0 50 1.7 1.2 0.8 .25 5.0
EC103D 0.8 0.51 400 200 1.0 50 1.7 1.2 0.8 .25 5.0
EC103E 0.8 0.51 500 200 1.0 50 1.7 1.2 0.8 .25 5.0
EC103M 0.8 0.51 600 200 2.0 100 1.7 1.2 0.8 .25 5.0
EC103A1 0.8 0.51 100 12 1.0 50 1.7 1.2 0.8 0.2 5.0
EC103B1 0.8 0.51 200 12 1.0 50 1.7 1.2 0.8 0.2 5.0
EC103C1 0.8 0.51 300 12 1.0 50 1.7 1.2 0.8 0.2 5.0
EC103D1 0.8 0.51 400 12 1.0 50 1.7 1.2 0.8 0.2 5.0
EC103E1 0.8 0.51 500 12 1.0 50 1.7 1.2 0.8 0.2 5.0
EC103M1 0.8 0.51 600 12 2.0 100 1.7 1.2 0.8 0.2 5.0
EC103A2 0.8 0.51 100 50 1.0 50 1.7 1.2 0.8 .25 5.0
EC103B2 0.8 0.51 200 50 1.0 50 1.7 1.2 0.8 .25 5.0
EC103C2 0.8 0.51 300 50 1.0 50 1.7 1.2 0.8 .25 5.0
EC103D2 0.8 0.51 400 50 1.0 50 1.7 1.2 0.8 .25 5.0
EC103E2 0.8 0.51 500 50 1.0 50 1.7 1.2 0.8 .25 5.0
EC103M2 0.8 0.51 600 50 2.0 100 1.7 1.2 0.8 .25 5.0
EC103A3 0.8 0.51 100 500 1.0 50 1.7 1.2 0.8 .25 8.0
EC103B3 0.8 0.51 200 500 1.0 50 1.7 1.2 0.8 .25 8.0
EC103C3 0.8 0.51 300 500 1.0 50 1.7 1.2 0.8 .25 8.0
EC103D3 0.8 0.51 400 500 1.0 50 1.7 1.2 0.8 .25 8.0
EC103E3 0.8 0.51 500 500 1.0 50 1.7 1.2 0.8 .25 8.0
EC103M3 0.8 0.51 600 500 2.0 100 1.7 1.2 0.8 .25 8.0
EC113A 0.8 0.51 100 200 2.0 100 1.7 1.2 0.8 .25 15.0
EC113B 0.8 0.51 200 200 2.0 100 1.7 1.2 0.8 .25 15.0
EC113C 0.8 0.51 300 200 2.0 100 1.7 1.2 0.8 .25 15.0
EC113D 0.8 0.51 400 200 2.0 100 1.7 1.2 0.8 .25 15.0
EC113E 0.8 0.51 500 200 2.0 100 1.7 1.2 0.8 .25 15.0
EC113M 0.8 0.51 600 200 2.0 100 1.7 1.2 0.8 .25 15.0
EC113A3 0.8 0.51 100 500 2.0 100 1.7 1.2 0.8 .25 15.0
EC113B3 0.8 0.51 200 500 2.0 100 1.7 1.2 0.8 .25 15.0
EC113C3 0.8 0.51 300 500 2.0 100 1.7 1.2 0.8 .25 15.0
EC113D3 0.8 0.51 400 500 2.0 100 1.7 1.2 0.8 .25 15.0
EC113E3 0.8 0.51 500 500 2.0 100 1.7 1.2 0.8 .25 15.0
EC113M3 0.8 0.51 600 500 2.0 100 1.7 1.2 0.8 .25 15.0
2N5060 0.8 0.51 30 200 1.0 50 1.7 1.2 0.8 .25 5.0
2N5061 0.8 0.51 60 200 1.0 50 1.7 1.2 0.8 .25 5.0
2N5062 0.8 0.51 100 200 1.0 50 1.7 1.2 0.8 .25 5.0
2N5063 0.8 0.51 150 200 1.0 50 1.7 1.2 0.8 .25 5.0
2N5064 0.8 0.51 200 200 1.0 50 1.7 1.2 0.8 .25 5.0
2N6564 0.8 0.51 300 200 1.0 100 1.7 1.2 0.8 .25 5.0
2N6565 0.8 0.51 400 200 1.0 100 1.7 1.2 0.8 .25 5.0
1.5
AMPS
TCR22-2 1.5 .95 50 200 1.0 50 100 1.5 1.0 0.8 .25 5.0
TCR22-3 1.5 .95 100 200 1.0 50 100 1.5 1.0 0.8 .25 5.0
TCR22-4 1.5 .95 200 200 1.0 50 100 1.5 1.0 0.8 .25 5.0
TCR22-6 1.5 .95 400 200 1.0 50 100 1.5 1.0 0.8 .25 5.0
TCR22-8 1.5 .95 600 200 2.0 100 200 1.5 1.0 0.8 .25 5.0
KGA
Sensit ive SCRs
Teccor Electronics, Inc. 5-3 Sensitive SCRs
(972) 580-7777
See Gen er al N ote s a nd El ect ri cal S pe cifi cat ion s N otes o n pag e 5-4.
IGM VGRM PGM PG(AV) ITSM dv/dt di/dt tgt tql2t
Peak Gate
Current
(16)
Amps
Peak
Reverse
Gate
Voltage
Volts
Peak Gate
Power
Dissipation
(16)
Watts
Average
Gate Power
Dissipation
Watts
Peak One
Cycle Surge
Forward
Current
(6) (7) (12)
Amps
Critical Rate-
Of-Rise Of
Forward
Off-State
Voltage
Volts/µSec
Maximum
Rate-Of-
Change Of
On-State Current
IGT = 50mA
With 0.1µs
Rise Time
Amps/µSec
Gate Controlled
T urn-On Time
Gate Pulse
= 10mA
Min. Width
= 15µs
With Rise Time
≤ 0.1 µs
(8)
µSec
Circuit
Commutated
Turn-Off
Time
(9)
µSec
RMS Surge
(Non-Repeti-
tive) On-State
Current For
A Period Of
8.3ms For
Fusing
Amps2/Sec60Hz 50Hz
MIN MIN TYP MAX
1.0 5.0 1.0 0.1 20 16 30 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 30 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 30 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 30 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 20 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 15 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 20 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 20 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 20 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 20 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 15 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 10 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 20 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 10 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 30 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 20 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 30 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 30 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 30 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 30 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 20 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 15 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 30 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 20 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 6.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 6.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 6.0 1.0 0.1 20 16 75 50 3.5 50 1.6
1.0 6.0 1.0 0.1 20 16 75 50 3.5 50 1.6
1.0 6.0 1.0 0.1 20 16 60 50 3.5 50 1.6
1.0 6.0 1.0 0.1 20 16 40 50 3.5 50 1.6
1.0 6.0 1.0 0.1 20 16 30 50 3.5 50 1.6
Electrical Specifications
Sensitive SCRs 5-4 Teccor Electronics, Inc.
(972) 580-7777
Gen er al No tes
•Teccor 2N 506 0 and 2N6564 S eries devices confor m to all JEDEC
registered dat a. See specifications table on page 5-2.
•The case temperature (TC) is measured as shown on dim ensio nal
outline drawings. See “Package Dimensions” section of this
catalog.
•All measurements (except IGT) are made with an external resistor
RGK = 1 kΩ unless otherwise noted.
•All measurements are made at 60Hz with a resistive load at an
ambient temperature of +25oC unless otherwise specified.
•Operating temperature (TJ) is -65oC to + 110oC for “EC” Series
dev ice s; - 65oC to +125oC for “2N” Serie s de vice s; -40oC t o + 125 oC
for “TCR” Ser ie s; an d - 40 oC to +110oC for all others.
•Storage temperature range (TS) is -65oC to + 150oC for TO-92
devices; -40oC to +1 50oC for TO- 202 devices; and -40oC to
+125oC for all others.
•Lead solder temperature is a maximum of +230oC for 10 seconds
maximum ≥ 1/16" (1.59mm) from case.
Elec tr i cal S p eci fi cati o n N o tes
(1) See Figures 5.1 thro ugh 5.9 for current ra tings at s pecified operat-
ing case temperatures.
(2) See Figure 5.10 for IGT vs TC.
(3) See Figure 5.11 for instantaneous on-state current (iT) vs on-state
voltage (vT) - (typical).
(4) See Figure 5.12 for VGT vs TC.
(5) See Figure 5.13 for IH vs TC.
(6) For more than one ful l cycl e, see Figur e 5.14.
(7 ) 0 .8 - 4. 0A de vi ce s al so ha ve a pu ls e pe ak for war d c urr ent on -st at e
rating (repe titive) of 75A. This rating applies for operat ion at 60Hz,
75°C maximum tab (or anode) lead temperature, switching from
80V peak, sinusoidal current pulse width of 10µs mini mu m , 15µs
max imum . See F igu res 5. 2 0 an d 5.21.
(8) See Figure 5.15 for tgt vs IGT.
(9) Test conditions as follows:
TC ≤ 80°C, rectangular current waveform; rate-of-rise of current
≤10A/µs. Rate-of-reversal of current ≤ 5A/µs. ITM = 1A (50µs
pulse) Repetition Rate = 60pps. VRRM = Rated. VR = 15 V mini-
mum, VDRM = Rated. Rate-of-rise reapplied forward blocking volt-
age = 5V / µs. Gate Bias = 0V, 100Ω (during turn-o ff time interval).
(10) Test condit ion is maximum rated RMS current except TO-92
devices are 1.2APK; T106/T107 devices are 4APK.
(11) VD = 6VDC, RL = 100Ω. See Figure 5.19 for simple test circuit for
measuring gate trigger vol tage and gate trigger current.
(12) See Figures 5.1 thr ough 5.9 for maxim um allow able case temper-
ature at maximum rated current.
(13) IGT = 500µA maximum f or TC = -40°C for T106 devices.
(14) IH = 10 mA maximum fo r TC = -65 °C for 2N5060 Series and
2N6564 Series devices.
(15) IH = 6mA maximum fo r T C = -4 0 °C f or T106 devices.
(16) Pulse Width ≤ 10µs.
(17) IGT = 350µA maximum at TC = -65°C for 2N5060 Ser ies an d
2N6564 Series devices.
(18) Latching current can be higher than 20mA for higher IGT types.
Also latching current can be much higher at -40°C. See Figure
5.18.
(19) TC = TJ for test conditions in off-state.
TYPE
Part
Number IT
VDRM &
VRRM IGT
IDRM &
IRRM VTM VGT IHIGM
Non-Isolated
TO-202AB
Maximum
On-State
Current
(1)
Amps
Repetitive
Peak
Off-State
Forward &
Reverse
Voltage
Volts
DC Gate
Trigger
Current
(2) (11) (13)
µAmps
Peak Off-State
Current at
VDRM & VRRM
(19)
µAmps
Peak
On-State
Voltage
TC = 25°C
(3) (10)
Volts
DC Gate
Trigger Voltage
(4) (11)
Volts
DC Holding
Current
Initial On-State
Current = 20mA
(5) (15) (18)
mAmps
Peak Gate
Current
(16)
Amps
See “Package
Dimensions”
section for
variations.
IT(RMS) IT(AV)
TC =
25°CTC =
110°CTC =
- 40°CTC =
25°CTC =
110°CTC = 25°C
MAX MAX MIN MAX MAX MAX MAX MAX MAX MIN MAX
4.0
Amps
T106F1 4.0 2.5 50 200 2.0 100 2.2 1.0 0.8 0.2 5.0 1.0
T106A1 4.0 2.5 100 200 2.0 100 2.2 1.0 0.8 0.2 5.0 1.0
T106B1 4.0 2.5 200 200 2.0 100 2.2 1.0 0.8 0.2 5.0 1.0
T106C1 4.0 2.5 300 200 2.0 100 2.2 1.0 0.8 0.2 5.0 1.0
T106D1 4.0 2.5 400 200 2.0 100 2.2 1.0 0.8 0.2 5.0 1.0
T106E1 4.0 2.5 500 200 2.0 100 2.2 1.0 0.8 0.2 5.0 1.0
T106M1 4.0 2.5 600 200 2.0 100 2.2 1.0 0.8 0.2 5.0 1.0
T107F1 4.0 2.5 50 500 2.0 100 2.5 1.0 0.8 0.2 6.0 1.0
T107A1 4.0 2.5 100 500 2.0 100 2.5 1.0 0.8 0.2 6.0 1.0
T107B1 4.0 2.5 200 500 2.0 100 2.5 1.0 0.8 0.2 6.0 1.0
T107C1 4.0 2.5 300 500 2.0 100 2.5 1.0 0.8 0.2 6.0 1.0
T107D1 4.0 2.5 400 500 2.0 100 2.5 1.0 0.8 0.2 6.0 1.0
T107E1 4.0 2.5 500 500 2.0 100 2.5 1.0 0.8 0.2 6.0 1.0
T107M1 4.0 2.5 600 500 2.0 100 2.5 1.0 0.8 0.2 6.0 1.0
KAG
A
Sensit ive SCRs
Teccor Electronics, Inc. 5-5 Sensitive SCRs
(972) 580-7777
VGRM PGM PG(AV) ITSM dv/dt di/dt tgt tql2t
Peak
Reverse
Gate
Voltage
Volts
Peak Gate
Power
Dissipation
(16)
Watts
Average
Gate Power
Dissipation
Watts
Peak One
Cycle Surge
Forward
Current
(6) (7) (12)
Amps
Critical Rate-
Of-Rise Of
Forward
Off-State
Voltage
Volts/µSec
Maximum
Rate-Of-
Change Of
On-State
Current
IGT = 50mA
with 0.1µs
Rise Time
Amps/µSec
Gate Controlled
T urn-On Time
Gate Pulse
= 10mA
Min. Width
= 15µs
with Rise Time
≤ 0.1 µs
(8)
µSec
Circuit
Commutated
Turn-Off
Time
(9)
µSec
RMS Surge
(Non-Repetitive)
On-State
Current For
A Period Of
8.3 msec for
Fusing
Amps2Sec60Hz 50Hz TC = 110°C
MIN TYP TYP MAX
6.0 1.0 0.1 20 16 850 4.0 50 1.6
6.0 1.0 0.1 20 16 850 4.0 50 1.6
6.0 1.0 0.1 20 16 850 4.0 50 1.6
6.0 1.0 0.1 20 16 850 4.0 50 1.6
6.0 1.0 0.1 20 16 850 4.0 50 1.6
6.0 1.0 0.1 20 16 850 4.0 50 1.6
6.0 1.0 0.1 20 16 850 4.0 50 1.6
6.0 1.0 0.1 20 16 850 5.0 45 1.6
6.0 1.0 0.1 20 16 850 5.0 45 1.6
6.0 1.0 0.1 20 16 850 5.0 45 1.6
6.0 1.0 0.1 20 16 850 5.0 45 1.6
6.0 1.0 0.1 20 16 850 5.0 45 1.6
6.0 1.0 0.1 20 16 850 5.0 45 1.6
6.0 1.0 0.1 20 16 850 5.0 45 1.6
Electrical Specifications
Sensitive SCRs 5-6 Teccor Electronics, Inc.
(972) 580-7777
Gen er al No tes
•Teccor 2N5060 and 2N6564 Series devices confor m to all JEDEC
registered dat a. See specifications table on page 5-2.
•The case temperature (TC) is measured as shown on dim ensio nal
outline drawings. See “Package Dimensions” section of this
catalog.
•All measurements (except IGT) are made with an external resistor
RGK = 1 kΩ unless otherwise noted.
•All measurements are made at 60Hz with a resistive load at an
ambient temperature of +25oC unless otherwise specified.
•Operating temperature (TJ) is -65oC to + 110oC for “EC” Series
dev ice s; - 65oC to +125oC for “2N” Serie s de vice s; -40oC t o + 125 oC
for “TCR” Ser ie s; an d - 40 oC to +110oC for all others.
•Storage temperature range (TS) is -65oC to + 150oC for TO-92
devices; -40oC to +1 50oC for TO-202 devices; and -4 0oC to
+125oC for all others.
•Lead solder temperature is a maximum of +230oC for 10 seconds
maximum ≥ 1/16" (1.59mm) from case.
TYPE
Part Number IT
VDRM &
VRRM IGT
IDRM &
IRRM VTM VGT IH
Isolated Non-Isolated
TO-220AB TO-202AB
Maximum
On-State
Current
(1)
Amps
Repetitive Peak
Off-State
Forward &
Reverse
Voltage
Volts
DC Gate
Trigger
Current
(2) (11)
µAmps
Peak
Off-State
Current at
VDRM & VRRM
(19)
mAmps
Peak
On-State
Voltage
TC = 25°C
(3) (10)
Volts
DC Gate
Trigger Voltage
(4 ) (11)
Volts
DC Holding
Current
Initial
On-State
Current =
20mA
(5 ) (1 8 )
mAmps
See “Package D imensi ons” section
for variations. IT(RMS) IT(AV)
TC =
25°CTC =
110°CTC =
- 40°CTC =
25°CTC =
110°C
MAX MAX MIN MAX MAX MAX MAX MAX MAX MIN MAX
6.0
Amps
S0506LS2 S0506FS21 6.0 3.8 50 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S0506LS3 S0506FS31 6.0 3.8 50 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S1006LS2 S1006FS21 6.0 3.8 100 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S1006LS3 S1006FS31 6.0 3.8 100 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S2006LS2 S2006FS21 6.0 3.8 200 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S2006LS3 S2006FS31 6.0 3.8 200 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S4006LS2 S4006FS21 6.0 3.8 400 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S4006LS3 S4006FS31 6.0 3.8 400 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S6006LS2 S6006FS21 6.0 3.8 600 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S6006LS3 S6006FS31 6.0 3.8 600 500 .005 0.25 1.6 1.0 0.8 .25 8.0
8.0
Amps
S0508LS2 S0508FS21 8.0 5.1 50 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S0508LS3 S0508FS31 8.0 5.1 50 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S1008LS2 S1008FS21 8.0 5.1 100 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S1008LS3 S1008FS31 8.0 5.1 100 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S2008LS2 S2008FS21 8.0 5.1 200 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S2008LS3 S2008FS31 8.0 5.1 200 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S4008LS2 S4008FS21 8.0 5.1 400 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S4008LS3 S4008FS31 8.0 5.1 400 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S6008LS2 S6008FS21 8.0 5.1 600 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S6008LS3 S6008FS31 8.0 5.1 600 500 .005 0.25 1.6 1.0 0.8 .25 8.0
10.0
Amps
S0510LS2 S0510FS21 10.0 6.4 50 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S0510LS3 S0510FS31 10.0 6.4 50 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S1010LS2 S1010FS21 10.0 6.4 100 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S1010LS3 S1010FS31 10.0 6.4 100 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S2010LS2 S2010FS21 10.0 6.4 200 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S2010LS3 S2010FS31 10.0 6.4 200 500 .005 0.25 1.6 1.0 0.8 .25 8.0
S4010LS2 S4010FS21 10.0 6.4 400 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S4010LS3 S4010FS31 10.0 6.4 400 500 .005 0.25 1.6 1.0 0.8 .26 8.0
S6010LS2 S6010FS21 10.0 6.4 600 200 .005 0.25 1.6 1.0 0.8 .25 6.0
S6010LS3 S6010FS31 10.0 6.4 600 500 .005 0.25 1.6 1.0 0.8 .25 8.0
KAG
KAG
A
Sensit ive SCRs
Teccor Electronics, Inc. 5-7 Sensitive SCRs
(972) 580-7777
Elec tr i cal S p eci fi cati o n N o tes
(1) See Figures 5.1 thro ugh 5.9 for current ra tings at s pecified operat-
ing case temperatures.
(2) See Figure 5.10 for IGT vs TC.
(3) See Figure 5.11 for instantaneous on-state current (iT) vs on-state
voltage (vT) - (typical).
(4) See Figure 5.12 for VGT vs TC.
(5) See Figure 5.13 for IH vs TC.
(6) For more than one ful l cycl e, see Figur e 5.14.
(7 ) 0 .8 - 4. 0A de vi ce s al so ha ve a pu ls e pe ak for war d c urr ent on -st at e
rating (repetitive) of 75A. This rating applies for operat ion at 60Hz,
75°C maximum tab (or anode) lead temperature, switching from
80V peak, sinusoidal curre nt pulse width of 10µs minimum, 15µs
max imum . See F igu res 5. 2 0 an d 5.21.
(8) See Figure 5.15 for tgt vs IGT.
(9) Test condit ions as follows:
TC ≤ 80°C, rectangular current waveform; rate-of-rise of current ≤
10A/µs. Rate-of-reversal of current ≤ 5A/µs. ITM = 1A (50µs pu lse )
Repetitio n Rate = 60pps. VRRM = Rated.
VR = 15V minimum, VDRM = Rated. Rate-of-rise reapplied forward
blocki ng voltage= 5V/µs. Gate Bias = 0V, 100Ω (during tur n-off
time interval).
(10) Test condit ion is maximum rated RMS current except TO-92
devices are 1.2APK; T106/T107 devices are 4APK.
(11) VD = 6VDC, RL = 100Ω. See Figure 5.19 for simple test circuit for
measuring gate trigger vol tage and gate trigger current.
(12) See Figures 5.1 thr ough 5.9 for maxim um allow able case temper-
ature at maximum rated current.
(13) IGT = 500µA maximum f or TC = -40°C for T106 devices.
(14) IH = 10 mA maximum fo r TC = -65 °C for 2N5060 Series and
2N6564 Series devices.
(15) IH = 6mA maximum fo r T C = -4 0 °C f or T106 devices.
(16) Pulse Width ≤ 10µs.
(17) IGT = 350µA maximum at TC = -65°C for 2N5060 Ser ies an d
2N6564 Series devices.
(18) Latching curren t can be higher tha n 20mA for higher IGT types.
Also latching current can be much higher at -40°C. See Figure
5.18.
(19) TC = TJ for test conditions in off-state.
IGM VGRM PGM PG(AV) ITSM dv/dt di/dt tgt tql2t
Peak Gate
Current
(16)
Amps
Peak
Reverse
Gate
Voltage
Volts
Peak Gate
Power
Dissipation
(16)
Watts
Average
Gate Power
Dissipation
Watts
Peak One
Cycle Surge
Forward
Current
(6) (12)
Amps
Critical Rate-
Of-Rise Of
Forward
Off-State
Voltage
Volts/µSec
Maximum
Rate-Of-Change
Of On-State Current
IGT = 50mA
With 0.1 µs
Rise Time
Amps/ µSec
Gate Contr olled
Turn-On Time
Gate Pulse = 10mA
Min. Width = 15µs
With Rise Time
≤ 0.1 µs
(8)
µSec
Circuit
Commutated
Turn-Off
Time
(9)
µSec
RMS Surge
(Non-Repetitive)
On-State
Current For
A Period Of
8.3 mSec For
Fusing
Amps2SecTC = 110°C
MIN 60 Hz 50 Hz TYP TYP MAX
1.0 6.0 1.0 0.1 100 83 20 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 20 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 20 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 20 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 20 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 20 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5100 5.0 45 41
Electrical Specifications
Sensitive SCRs 5-8 Teccor Electronics, Inc.
(972) 580-7777
Electrical Isolat ion
Teccor’s isolat ed sensitive SCR s will withst and a minimum high
potenti al tes t of 2 500 VAC R M S from lea ds to mounti ng tab over
the device's operatin g temperatur e range. Se e table below for
other stan dard and opt ional isolation ratings .
*For 4000V Isolation use “V” Suffix in part number
**UL Recognized File #E71639
Figure 5.1 Maximum Allowable Cas e Temperature vs RMS On-State
Current (JEDEC “2N” Series and “EC” Seri es)
Figure 5.2 Maximum Allowable Cas e Temperature vs RMS On-State
Current (T106 and T107)
Figure 5.3 Maximum Allowable Cas e Tem perature v s Average On-
State Current (JEDEC “2N” S eries and “EC” Se r ie s)
THERMAL RESISTANCE (STEADY STATE)
RθJC [Rθ JA] °C/W (TYPICAL)
E
TO-92
L
THERMOTAB
TO-220AB
F2
TY PE 2 TO-
202AB
F
TYPE 1 & 3
TO-202AB
0.8 Amp 75 [160]
1.5 Amps 50 [160]
4.0 Amps 10 [100] 6.2 [80]
6.0 Amps 4.0 [65] 4.3
8.0 Amps 3.4 3.9
10.0 Amps 3.0 3.4
ELECTRICAL ISOLATION
FROM LEADS TO MOUNTING TAB
VAC(RMS)
THERMOTAB**
TO-220AB
2500 Standard
4000 Optional*
0 0.5 1.0 1.5 2.0
50
60
70
80
90
100
110
120
130 CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180˚
CASE TEMPERATURE: Measured
as Shown on Dimensional Drawing
JEDEC "2N" SERIES
"EC" SERIES
RMS On-State Current [IT(RMS)] - Amps
Maximum Allowable Case Temperature (TC) - ˚C
0.8
0 .5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
40
50
60
70
80
90
100
110
120
130
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180˚
CASE TEMPERATURE: Measured
as Shown on Dimensional Drawing
T106 & T107 TYPE 1 & 3
T106 & T107 TYPE 2 & 4
1.5 DEVICES
RMS On-State Current [IT(RMS)] - Amps
Maximum Allowable Case Temperature (TC) - ˚C
2.6
0 0.2 0.4 0.6 0.8 1.0 1.2
50
60
70
80
90
100
110
120
130 CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180
˚
CASE TEMPERATURE: Measured
as Shown on Dimensional Drawing
JDEC "2N" SERIES
"EC" SERIES
Average On-State Current [IT(AV)] - Amps
Maximum Allowable Case Temperature (TC) - ˚C
0.51
Sensit ive SCRs
Teccor Electronics, Inc. 5-9 Sensitive SCRs
(972) 580-7777
Figure 5.4 Maximum Allowable Cas e Tem perature v s Average On-
State Current (T106 and T 107)
Figure 5.5 Maximum Allowable Ambient Temperature vs On-State
Current (1.5 Amp, JEDEC “2N” Series and “EC” Se rie s)
Figure 5.6 Maximum Allowable Ambient Temperat ure vs RMS On-
State Current (T106 and T 107)
Figure 5.7 Maximum Allowable Ambient Temperat ure vs Average On-
State Current
Figure 5.8 Maximum Allowable Cas e Temperature vs RMS On-State
Current
Figure 5.9 Maximum Allowable Cas e Tem perature v s Average On-
State Current
0 0.5 1.0 1.5 2.0 2.5 3.0
50
60
70
80
90
100
110
120
130
Average On-State Current [IT(AV)] - Amps
Maximum Allowable Case Temperature (TC) -
˚
C
0.95
40
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180
˚
CASE TEMPERATURE: Measured
as Shown on Dimensional Drawing
1.5 DEVICES
T106 & T107 TYPE 1 & 3
T106 & T107 TYPE 2 & 4
1.65 1.9 2.54
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
140
120
100
80
60
40
20
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180
˚
FREE AIR RATING
1.5 AMP DEVICES & JEDEC "2N" SERIES IT(RMS)
EC SERIES IT(RMS)
1.5 AMP & JEDEC
"2N" SERIES IT(AV)
& EC SERIES IT(AV)
On-State Current - Amps
Maximum Allowable Ambient Temperature (TA) - ˚C
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
140
120
100
80
60
40
20
RMS On-State Current [IT(RMS)] - Amps
Maximum Allowable Ambient Temperature (TA) - ˚C
2.0
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180
˚
FREE AIR RATING
T106/T107 TO-202 TYPE 1 & 3
T106/T107 TO-202 TYPE 2 & 4
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
20
40
60
80
100
120
140
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180
˚
FREE AIR RATING
Average On-State Current [IT(AV)]- Amps
Maximum Allowable Ambient Temperature (TA) - ˚C
T106/T107 TO-202 TYPE 1 & 3
T106/T107 TO-202 TYPE 2 & 4
50
24 68100
60
70
80
90
100
110
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180˚
TEMPERATURE: Measured as
Shown on Dimensional Drawings
10 AMP DEVICES
8 AMP DEVICES
6 AMP DEVICES
RMS On-State Current [IT(RMS)] - Amps
Maximum Allowable Case Temperature (TC) - ˚C
50
134560
60
70
80
90
100
110
Average On-State Current [IT(AV)] - Amps
Maximum Allowable Case Temperature (TC) - ˚C
72
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180˚
CASE TEMPERATURE: Measured
as Shown on Dimensional Drawings
6 AMP DEVICES
8 AMP DEVICES
10 AMP DEVICES
Electrical Specifications
Sensitive SCRs 5-10 Teccor Electronics, Inc.
(972) 580-7777
Figure 5.10 Normalized DC Gate-Trigger Current vs Case Temperat ure
Figure 5.11 Instantaneous On-State Current vs On-State Vol tage
(Typical)
Figure 5.12 Normalized DC Gate-Trigger Voltage vs Case Te m perature
Figure 5.13 Normalized DC Hol ding C urrent vs Case Temperat ure
Figure 5.14 Peak Surge On-State Current v s S urge Current Duration
-65 -15 +25 +65 +110 +125-40
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
Case Temperature (TC) - ˚C
Ratio of IGT
I
GT
(TC = 25˚C)
See General Notes for specific device
operating temperature range.
0 .6 .8 1.0 1.2 1.4 1.6
0
4
8
12
16
20
24
28
32 TC = 25˚C
6-10 AMP DEVICES
0.8-1.5 AMP TO-92 AND
T106/T107 DEVICES
Instantaneous On-State Voltage (vT) - Volts
Instantaneous On-State Current (iT) - Amps
-65 -15 +25 +65 +110 +125-40
0
.5
1.0
1.5
2.0
Case Temperature (TC) -
˚
C
Ratio of VGT
VGT (TC = 25
˚
C)
See General Notes for specific
operating temperature range
-65 -40 -15 +25 +65 +110 +125
0
1.0
2.0
3.0
4.0 See General Notes for specific
operating temperature range.
Case Temperature (TC) - ˚C
Ratio of IH
IH(TC = 25˚C)
1 2 3 4 5 6 8 10 20 30 40 50 60 80100 200 300 400 600 1000
1
2
3
4
5
6
8
10
20
30
40
50
60
80
100
200
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS ON-STATE CURRENT: [IT(RMS)]: Max
Rated Value at Specified Case Temperature
10 AMP DEVICES
8 AMP DEVICES
6 AMP DEVICES
1.5 AMP DEVICES
0.8 AMP DEVICES
T106 & T107
Surge Current Duration - full cycles
Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps
NOTES 1) GATE CONTROL MAY BE LOST
DURING AND IMMEDIATELY
FOLLOWING SURGE CURRENT
INTERVAL.
2) OVERLOAD MAY NOT BE REPEATED
UNTIL JUNCTION TEMPERATURE
HAS RETURNED TO STEADY-STATE
RATED VALUE.