BCP53TA - DIODES INC - Datasheet.Support

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 6 - 2

1 of 7

www.diodes.com

March 2015

BCP 51/ 52/ 53

PNP MEDIUM POWER TRANSISTORS IN SOT223

Features

 BVCEO > -45V, -60V & -80V

 IC = -1A High Continuous Collector Current

 ICM = -2A Peak Pulse Current

 2W Power Dissipation

 Low Saturation Voltage VCE(sat) < -500mV @ -0.5A

 Gain Groups 10 and 16

 Complementary NPN Types: BCP54, 55 and 56

 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

 Halogen and Antimony Free. “Green” Device (Note 3)

 Qualified to AEC-Q101 Standards for High Reliability

 PPAP Capable (Note 4)

Mechanical Data

 Case: SOT223

 Case Material: Molded Plastic. “Green” Molding Compound;

UL Flammability Rating 94V-0

 Moisture Sensitivity: Level 1 per J-STD-020

 Terminals: Finish - Matte Tin Plated Leads; Solderable per

MIL-STD-202, Method 208

 Weight: 0.112 grams (Approximate)

Applications

 Medium Power Switching or Amplification Applications

 AF Driver and Output Stages

Ordering Information (Notes 4 & 5)

Product

Compliance

Marking

Reel size (inches)

Tape width (mm)

Quantity per reel

BCP51TA

AEC-Q101

BCP 51

7

12

1,000

BCP5110TA

AEC-Q101

BCP 5110

7

12

1,000

BCP5116TA

AEC-Q101

BCP 5116

7

12

1,000

BCP5116TC

AEC-Q101

BCP 5116

13

12

4,000

BCP52TA

AEC-Q101

BCP 52

7

12

1,000

BCP5210TA

AEC-Q101

BCP 5210

7

12

1,000

BCP5216TA

AEC-Q101

BCP 5216

7

12

1,000

BCP53TA

AEC-Q101

BCP 53

7

12

1,000

BCP53QTA

Automotive

BCP 53

7

12

1,000

BCP5310TA

AEC-Q101

BCP 5310

7

12

1,000

BCP5316TA

AEC-Q101

BCP 5316

7

12

1,000

BCP5316QTA

Automotive

Refer to http://diodes.com/datasheets/BCP5316Q.pdf

BCP5316TC

AEC-Q101

BCP 5316

13

12

4,000

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"

and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.

4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally

the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.

5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.

Marking Information

Top View

Device Symbol

SOT223

C

E

B

Top View

Pin-Out

YWW

BCP

XXXX

SOT223

BCP = Product Type Marking Code, Line 1

XXXX = Product Type Marking Code, Line 2 as follows:

BCP51 = 51 BCP52 = 52 BCP53 = 53

BCP5110 = 5110 BCP5210 = 5210 BCP5310 = 5310

BCP5116 = 5116 BCP5216 = 5216 BCP5316 = 5316

YWW = Date Code Marking

Y or Y = Last Digit of Year (ex: 5= 2015)

WW or WW = Week Code (01~53)

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 6 - 2

2 of 7

www.diodes.com

March 2015

BCP 51/ 52/ 53

Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.)

Characteristic

Symbol

BCP51

BCP52

BCP53

Unit

Collector-Base Voltage

VCBO

-45

-60

-100

V

Collector-Emitter Voltage

VCEO

-45

-60

-80

V

Emitter-Base Voltage

VEBO

-5

V

Continuous Collector Current

IC

-1

A

Peak Pulse Collector Current

ICM

-2

Continuous Base Current

IB

-100

mA

Peak Pulse Base Current

IBM

-200

Thermal Characteristics (@TA = +25°C, unless otherwise specified.)

Characteristic

Symbol

Value

Unit

Power Dissipation

(Note 6)

PD

2

W

Thermal Resistance, Junction to Ambient

(Note 6)

RθJA

62

°C/W

Thermal Resistance, Junction to Leads

(Note 7)

RθJL

19.4

°C/W

Operating and Storage Temperature Range

TJ, TSTG

-65 to +150

°C

ESD Ratings (Note 8)

Characteristic

Symbol

Value

Unit

JEDEC Class

Electrostatic Discharge - Human Body Model

ESD HBM

4,000

V

3A

Electrostatic Discharge - Machine Model

ESD MM

400

V

C

Notes: 6. For a device mounted with the collector lead on 50mm x 50mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air

conditions whilst operating in steady-state.

7. Thermal resistance from junction to solder-point (at the end of the collector lead).

8. Refer to JEDEC specification JESD22-A114 and JESD22-A115.

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 6 - 2

3 of 7

www.diodes.com

March 2015

BCP 51/ 52/ 53

Thermal Characteristics and Derating Information

100µ 1m 10m 100m 110 100 1k

0

20

40

60

80

100

120

140

160

020 40 60 80 100 120 140 160

0.0

0.5

1.0

1.5

2.0 50mm x 50mm

1oz Cu

Derating Curve

Temperature (°C)

Max Power Dissipation (W)

100µ 1m 10m 100m 110 100 1k

0

10

20

30

40

50

60 50mm x 50mm 1oz Cu

Tamb = 25°C

Pulse Power Dissipation

Pulse Width (s)

Transient Thermal Impedance

D=0.5

D=0.2

D=0.1

Single Pulse

D=0.05

Thermal Resistance (°C/W)

Pulse Width (s)

50mm x 50mm 1oz Cu

Tamb = 25°C

Single pulse

Maximum Power (W)

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 6 - 2

4 of 7

www.diodes.com

March 2015

BCP 51/ 52/ 53

Electrical Characteristics (@TA = +25°C, unless otherwise specified.)

Characteristic

Symbol

Min

Typ

Max

Unit

Test Condition

Collector-Base

Breakdown Voltage

BCP51

BVCBO

-45

—

V

IC = -100µA

BCP52

-60

BCP53

-100

Collector-Emitter

Breakdown Voltage (Note 9)

BCP51

BVCEO

-45

—

V

IC = -10mA

BCP52

-60

BCP53

-80

Emitter-Base Breakdown Voltage

BVEBO

-5

—

V

IE = -10µA

Collector Cut-Off Current

ICBO

—

-0.1

-20

μA

VCB = -30V

VCB = -30V, TA = +150°C

Emitter Cut-Off Current

IEBO

—

-20

nA

VEB = -4V

Static Forward Current Transfer Ratio (Note 9)

All Versions

hFE

25

40

25

—

250

—

IC = -5mA, VCE = -2V

IC = -150mA, VCE = -2V

IC = -500mA, VCE = -2V

10 gain grp

63

—

160

IC = -150mA, VCE = -2V

16 gain grp

100

—

250

IC = -150mA, VCE = -2V

Collector-Emitter Saturation Voltage (Note 9)

VCE(sat)

—

-0.5

V

IC = -500mA, IB = -50mA

Base-Emitter Turn-On Voltage (Note 9)

VBE(on)

—

-1.0

V

IC = -500mA, VCE = -2V

Transition Frequency

fT

150

—

MHz

IC = -50mA, VCE = -10V

f = 100MHz

Output Capacitance

Cobo

—

25

pF

VCB = -10V, f = 1MHz

Note: 9. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%.

0

0.2

0.4

0.6

0.8

1.0

0 1 2 3 4 5

-V , COLLECTOR-EMITTER VOLTAGE (V)

CE

I , COLLECTOR CURRENT (A)

C

I = 2mA

B

I = 4mA

B

I = 6mA

B

I = 8mA

B

I = 10mA

B

Fig. 1 Typical Collector Current

vs. Collector-Emitter Voltage

0

100

200

300

400

500

0.001 0.01 0.1 1 10

-I , COLLECTOR CURRENT (A)

C

h , DC CURRENT GAIN

FE

Fig. 2 Typical DC Current Gain vs. Collector Current

T = -55°C

A

T = 25°C

A

T = 85°C

A

T = 150°C

A

V = -5V

CE

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 6 - 2

5 of 7

www.diodes.com

March 2015

BCP 51/ 52/ 53

0

0.2

0.4

0.6

0.8

1.0

0.001 0.01 0.1 1 10

-I , COLLECTOR CURRENT(A)

C

-V , BASE-EMITTER TURN-ON VOLTAGE (V)

BE(ON)

Fig 3 Typical Base-Emitter Turn-On Voltage

vs. Collector Current

T = -55°C

A

T = 25°C

A

T = 85°C

A

T = 150°C

A

V = -2V

CE

0

0.1

0.2

0.3

0.4

0.5

0.001 0.01 0.1 1 10

-I , COLLECTOR CURRENT (A)

C

-V , COLLECTOR-EMITTER

SATURATION VOLTAGE (V)

CE(SAT)

Fig. 4 Typical Collector-Emitter Saturation Voltage

vs. Collector Current

T = -55°C

A

T = 25°C

A

T = 85°C

A

T = 150°C

A

0

0.2

0.4

0.6

0.8

1.0

1.2

0.001 0.01 0.1 1 10

-I , COLLECTOR CURRENT (A)

C

-V , BASE-EMITTER SATURATION VOLTAGE (V)

BE(SAT)

Fig. 5 Typical Base-Emitter Saturation Voltage

vs. Collector Current

T = -55°C

A

T = 25°C

A

T = 85°C

A

T = 150°C

A

I / I = 10

CB

0

50

100

150

200

250

300

020 40 60 80 100

-I , COLLECTOR CURRENT (mA)

C

f , GAIN-BANDWIDTH PRODUCT (MHz)

T

Fig. 6 Typical Gain-Bandwidth Product vs. Collector Current

V = -5V

CE

f = 100MHz

0

20

40

60

80

100

120

140

160

010 20 30 40

V , REVERSE VOLTAGE (V)

R

CAPACITANCE(pF)

Fig. 7 Typical Capacitance Characteristics

Cobo

Cibo

f = 1MHz

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 6 - 2

6 of 7

www.diodes.com

March 2015

BCP 51/ 52/ 53

Package Outline Dimensions

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.

Suggested Pad Layout

Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.

A1

A

7°

D

b

e

e1

b1

C

E1

L

0°-10°

Q

E

0.25

Seating

Plane

Gauge

Plane

SOT223

Dim

Min

Max

Typ

A

1.55

1.65

1.60

A1

0.010

0.15

0.05

b

0.60

0.80

0.70

b1

2.90

3.10

3.00

C

0.20

0.30

0.25

D

6.45

6.55

6.50

E

3.45

3.55

3.50

E1

6.90

7.10

7.00

e

-

4.60

e1

-

2.30

L

0.85

1.05

0.95

Q

0.84

0.94

0.89

All Dimensions in mm

Dimensions

Value (in mm)

C

2.30

C1

6.40

X

1.20

X1

3.30

Y

1.60

Y1

1.60

Y2

8.00

X1

Y1

Y

XC

C1 Y2

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 6 - 2

7 of 7

www.diodes.com

March 2015

BCP 51/ 52/ 53

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the

application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or

trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume

all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.

Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and

hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings

noted herein may also be covered by one or more United States, international or foreign trademarks.

This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the

final and determinative format released by Diodes Incorporated.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express

written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the

failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any

use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related

information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its

representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.

www.diodes.com