BCP 51/ 52/ 53 PNP MEDIUM POWER TRANSISTORS IN SOT223 Features Mechanical Data BVCEO > -45V, -60V & -80V IC = -1A High Continuous Collector Current ICM = -2A Peak Pulse Current 2W Power Dissipation Low Saturation Voltage VCE(sat) < -500mV @ -0.5A Gain Groups 10 and 16 Complementary NPN Types: BCP54, 55 and 56 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) Case: SOT223 Case Material: Molded Plastic. "Green" Molding Compound; UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads; Solderable per MIL-STD-202, Method 208 Weight: 0.112 grams (Approximate) Applications Medium Power Switching or Amplification Applications AF Driver and Output Stages C SOT223 B E Top View Top View Pin-Out Device Symbol Ordering Information (Notes 4 & 5) Product BCP51TA BCP5110TA BCP5116TA BCP5116TC BCP52TA BCP5210TA BCP5216TA BCP53TA BCP53QTA BCP5310TA BCP5316TA BCP5316QTA BCP5316TC Notes: Compliance AEC-Q101 AEC-Q101 AEC-Q101 AEC-Q101 AEC-Q101 AEC-Q101 AEC-Q101 AEC-Q101 Automotive AEC-Q101 AEC-Q101 Automotive AEC-Q101 Marking BCP 51 BCP 5110 BCP 5116 BCP 5116 BCP 52 BCP 5210 BCP 5216 BCP 53 BCP 53 BCP 5310 BCP 5316 Reel size (inches) 7 7 7 13 7 7 7 7 7 7 7 Tape width (mm) 12 12 12 12 12 12 12 12 12 12 12 Quantity per reel 1,000 1,000 1,000 4,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 12 4,000 Refer to http://diodes.com/datasheets/BCP5316Q.pdf BCP 5316 13 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information SOT223 BCP XXXX YWW BCP = Product Type Marking Code, Line 1 XXXX = Product Type Marking Code, Line 2 as follows: BCP51 = 51 BCP5110 = 5110 BCP5116 = 5116 BCP52 = 52 BCP5210 = 5210 BCP5216 = 5216 BCP53 = 53 BCP5310 = 5310 BCP5316 = 5316 YWW = Date Code Marking Y or Y = Last Digit of Year (ex: 5= 2015) WW or WW = Week Code (01~53) BCP 51 / 52 / 53 Datasheet Number: DS35366 Rev. 6 - 2 1 of 7 www.diodes.com March 2015 (c) Diodes Incorporated BCP 51/ 52/ 53 Absolute Maximum Ratings (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Collector Current Continuous Base Current Peak Pulse Base Current Symbol VCBO VCEO VEBO IC ICM IB IBM BCP51 -45 -45 BCP52 -60 -60 -5 -1 -2 -100 -200 BCP53 -100 -80 Unit V V V A mA Thermal Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Leads Operating and Storage Temperature Range (Note 6) (Note 6) (Note 7) Symbol PD RJA RJL TJ, TSTG Value 2 62 19.4 -65 to +150 Unit W C/W C/W C ESD Ratings (Note 8) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Notes: Symbol ESD HBM ESD MM Value 4,000 400 Unit V V JEDEC Class 3A C 6. For a device mounted with the collector lead on 50mm x 50mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in steady-state. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. BCP 51 / 52 / 53 Datasheet Number: DS35366 Rev. 6 - 2 2 of 7 www.diodes.com March 2015 (c) Diodes Incorporated BCP 51/ 52/ 53 160 60 50mm x 50mm 1oz Cu Tamb = 25C 50 40 Maximum Power (W) Thermal Resistance (C/W) Thermal Characteristics and Derating Information D=0.5 30 20 D=0.2 Single Pulse D=0.05 10 D=0.1 0 100 1m 10m 100m 1 10 100 1k 120 Single pulse 100 80 60 40 20 0 100 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Width (s) Transient Thermal Impedance Max Power Dissipation (W) 50mm x 50mm 1oz Cu Tamb = 25C 140 Pulse Power Dissipation 50mm x 50mm 1oz Cu 2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 120 140 160 Temperature (C) Derating Curve BCP 51 / 52 / 53 Datasheet Number: DS35366 Rev. 6 - 2 3 of 7 www.diodes.com March 2015 (c) Diodes Incorporated BCP 51/ 52/ 53 Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Symbol Typ Max Unit -- -- V IC = -100A -- -- V IC = -10mA BVEBO Min -45 -60 -100 -45 -60 -80 -5 -- V Collector Cut-Off Current ICBO -- -- Emitter Cut-Off Current IEBO -- -- -- -0.1 -20 -20 -- -- -- 250 hFE 25 40 25 -- -- VCE(sat) VBE(on) 63 100 -- -- -- -- -- -- 160 250 -0.5 -1.0 V V Transition Frequency fT 150 -- -- MHz Output Capacitance Cobo -- -- 25 pF IE = -10A VCB = -30V VCB = -30V, TA = +150C VEB = -4V IC = -5mA, VCE = -2V IC = -150mA, VCE = -2V IC = -500mA, VCE = -2V IC = -150mA, VCE = -2V IC = -150mA, VCE = -2V IC = -500mA, IB = -50mA IC = -500mA, VCE = -2V IC = -50mA, VCE = -10V f = 100MHz VCB = -10V, f = 1MHz BCP51 BCP52 BCP53 BCP51 BCP52 BCP53 Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) BVCBO BVCEO Emitter-Base Breakdown Voltage All Versions Static Forward Current Transfer Ratio (Note 9) 10 gain grp 16 gain grp Collector-Emitter Saturation Voltage (Note 9) Base-Emitter Turn-On Voltage (Note 9) A nA -- Test Condition 9. Measured under pulsed conditions. Pulse width 300s. Duty cycle 2%. Note: 500 1.0 VCE = -5V IB = 8mA 0.8 400 IB = 6mA 0.6 IB = 4mA 0.4 IB = 2mA hFE, DC CURRENT GAIN IC, COLLECTOR CURRENT (A) IB = 10mA T A = 150C 300 T A = 85C 200 100 0.2 0 0 1 2 3 4 5 -VCE, COLLECTOR-EMITTER VOLTAGE (V) Fig. 1 Typical Collector Current vs. Collector-Emitter Voltage BCP 51 / 52 / 53 Datasheet Number: DS35366 Rev. 6 - 2 4 of 7 www.diodes.com T A = 25C T A = -55C 0 0.001 0.01 0.1 1 10 -IC, COLLECTOR CURRENT (A) Fig. 2 Typical DC Current Gain vs. Collector Current March 2015 (c) Diodes Incorporated 0.5 -VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) 1.0 0.8 TA = -55C 0.6 TA = 25C T A = 85C 0.4 T A = 150C 0.2 0.4 0.3 TA = 150C 0.2 TA = 85C TA = 25C 0.1 VCE = -2V 0 0.001 TA = -55C 0.01 0.1 1 -IC, COLLECTOR CURRENT(A) Fig 3 Typical Base-Emitter Turn-On Voltage vs. Collector Current 0 0.001 10 0.01 0.1 1 10 -IC, COLLECTOR CURRENT (A) Fig. 4 Typical Collector-Emitter Saturation Voltage vs. Collector Current 1.2 300 fT, GAIN-BANDWIDTH PRODUCT (MHz) -VBE(SAT), BASE-EMITTER SATURATION VOLTAGE (V) -VBE(ON), BASE-EMITTER TURN-ON VOLTAGE (V) BCP 51/ 52/ 53 1.0 0.8 TA = -55C 0.6 TA = 25C TA = 85C 0.4 TA = 150C 0.2 IC / IB = 10 250 200 150 100 VCE = -5V f = 100MHz 50 0 0 0.001 0.01 0.1 1 10 -IC, COLLECTOR CURRENT (A) Fig. 5 Typical Base-Emitter Saturation Voltage vs. Collector Current 0 20 40 60 80 100 -IC, COLLECTOR CURRENT (mA) Fig. 6 Typical Gain-Bandwidth Product vs. Collector Current 160 140 f = 1MHz CAPACITANCE(pF) 120 100 80 Cibo 60 40 20 Cobo 0 0 10 20 30 40 VR, REVERSE VOLTAGE (V) Fig. 7 Typical Capacitance Characteristics BCP 51 / 52 / 53 Datasheet Number: DS35366 Rev. 6 - 2 5 of 7 www.diodes.com March 2015 (c) Diodes Incorporated BCP 51/ 52/ 53 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. D Q b1 C E E1 Gauge Plane 0.25 Seating Plane e1 L b 0 -1 0 e A1 7 7 A SOT223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b 0.60 0.80 0.70 b1 2.90 3.10 3.00 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e 4.60 e1 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 Y1 C1 Dimensions Value (in mm) C 2.30 C1 6.40 X 1.20 X1 3.30 Y 1.60 Y1 1.60 Y2 8.00 Y2 Y X BCP 51 / 52 / 53 Datasheet Number: DS35366 Rev. 6 - 2 C 6 of 7 www.diodes.com March 2015 (c) Diodes Incorporated BCP 51/ 52/ 53 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2015, Diodes Incorporated www.diodes.com BCP 51 / 52 / 53 Datasheet Number: DS35366 Rev. 6 - 2 7 of 7 www.diodes.com March 2015 (c) Diodes Incorporated