Product Family Data Sheet Rev. 25.2 2019. 03 11 High Power LED Series 3535 Ceramic Hot Binning LH351B High efficacy and high quality color rendering makes the LH351B suitable use in a broad range of applications Features & Benefits Operates at a maximum current of up to 1.5 A Uniform light distribution under any beam angle 80 CRI makes it well suited for most applications Hot binning @ 85 C Completed 10,000 hours of LM-80 testing @ 1 A, 105 Applications Indoor Lighting: Spotlight, Downlight Outdoor Lighting: Street Light, Tunnel Light, Security Light, Parking Lot Light Industrial Lighting: Consumer Lighting: High Bay Light, Low Bay Light Torch Light 1# 2 Table of Contents 1. Characteristics ----------------------- 3 2. Product Code Information ----------------------- 7 3. Typical Characteristics Graphs ----------------------- 20 4. Outline Drawing & Dimension ----------------------- 22 5. Reliability Test Items & Conditions ----------------------- 23 6. Soldering Conditions ----------------------- 24 7. Tape & Reel ----------------------- 25 8. Label Structure ----------------------- 27 9. Packing Structure ----------------------- 28 Precautions in Handling & Use ----------------------- 30 10. 3 1. Characteristics a) Absolute Maximum Rating Item Symbol Rating Unit Condition Operating Temperature Topr -40 ~ +105 C Note 1)* Storage Temperature Tstg -40 ~ +120 C - LED Junction Temperature Tj 150 C - Forward Current IF 1500 mA - Peak Pulse Forward Current IFP 2000 mA Duty 1/10 pulse width 10ms 260 <10 C s - 8 kV - Assembly Process Temperature ESD (HBM) - Notes: 1) Refer to the derating curve, `3. Typical Characteristics Graph', for proper driving current that maintained below maximum junction temperature. 4 b) Electro-optical Characteristics Item Unit Nominal CCT (K) Condition Value Typ. IF (mA) Tj (C) 350 25 149 350 85 136 700 85 249 1000 85 332 1500 85 446 350 25 175 350 85 160 700 85 292 1000 85 391 1500 85 525 350 25 2.86 350 85 2.75 700 85 2.89 1000 85 2.99 1500 85 3.12 3000 (80 CRI) Luminous Flux (v) lm 5000 (70 CRI) Forward Voltage (VF) V Reverse Voltage (@ 5 mA) V 350 25 14~19.5 Thermal Resistance (junction to solder point) C/W 350 25 4 Beam Angle 350 25 120 Notes: 1) Samsung maintains measurement tolerance of: 2) Characteristics @ 25 C are for reference only luminous flux = 7 %, forward voltage = 0.1 V 5 c) Luminous Flux Characteristics Nominal CCT (K) 2200 (Tj = 85 C) CRI (Ra) 1) Min. 80 70 2700 80 90 70 3000 80 90 70 3500 80 90 (value in bracket): 2) Sorting @ 350 mA (lm) Flux Rank Calculated Minimum Flux (lm) 1) @ 700 mA @ 1000 mA G3 100 181 238 322 (H3) (110) (199) (262) (353) Flux Min. K3 130 235 310 418 (M3) (143) (258) (340) (460) M3 140 252 335 457 (N3) (153) (276) (366) (499) N3 (P3) 150 270 359 489 (164) (295) (392) (534) J3 120 217 286 386 (K3) (132) (238) (314) (424) K3 130 235 310 418 (M3) (143) (258) (340) (460) F3 90 163 214 289 (G3) (99) (179) (236) (318) G3 100 181 238 322 (H3) (110) (199) (262) (353) M3 140 252 335 457 (N3) (153) (276) (366) (499) N3 (P3) 150 270 359 489 (164) (295) (392) (534) J3 120 217 286 386 (K3) (132) (238) (314) (424) K3 130 234 311 424 (M3) (142) (256) (340) (463) M3 140 252 335 457 (N3) (153) (276) (366) (499) G3 100 181 238 322 (H3) (110) (199) (262) (353) H3 110 199 262 354 (J3) (121) (218) (288) (389) K3 130 234 311 424 (M3) (142) (256) (340) (463) M3 140 252 335 457 (N3) (153) (276) (366) (499) N3 (P3) 150 270 359 489 (164) (295) (392) (534) K3 130 234 311 424 (M3) (142) (256) (340) (463) M3 140 252 335 457 (N3) (153) (276) (366) (499) G3 100 181 238 322 (H3) (110) (199) (262) (353) H3 110 199 262 354 (J3) (121) (218) (288) (389) Minimum luminous flux @ 25 C, for reference only Notes: 1) Samsung maintains measurement tolerance of: @ 1500 mA luminous flux = 7 %, CRI = 3 2) Calculated minimum flux values are for reference only 6 c) Luminous Flux Characteristics Nominal CCT (K) (Tj = 85 C) CRI (Ra) 1) Min. 70 4000 80 90 2) Sorting @ 350 mA (lm) Flux Rank N3 (P3) Calculated Minimum Flux (lm) 1) @ 700 mA @ 1000 mA 150 270 359 489 (164) (295) (392) (534) Flux Min. @ 1500 mA P3 160 288 382 518 (Q3) (174) (312) (415) (562) K3 130 235 310 418 (M3) (143) (258) (340) (460) M3 140 252 335 457 (N3) (153) (276) (366) (499) J3 120 217 286 386 (K3) (132) (238) (314) (424) M3 140 252 335 457 (N3) (153) (276) (366) (499) N3 150 270 359 489 (P3) (164) (295) (392) (534) 70 5000 P3 160 288 382 518 (Q3) (174) (312) (415) (562) Q2 170 306 405 545 (R2) (184) (329) (437) (590) M3 140 252 335 457 (N3) (153) (276) (366) (499) 80 90 70 5700 80 6000K N3 150 270 359 489 (P3) (164) (295) (392) (534) K3 130 234 311 424 (M3) (142) (256) (340) (463) N3 (P3) 150 270 359 489 (164) (295) (392) (534) P3 160 288 382 518 (Q3) (174) (312) (415) (562) M3 140 252 335 457 (N3) (153) (276) (366) (499) K3 130 234 311 424 (M3) (142) (256) (340) (463) 80 M3 140 252 335 457 (N3) (153) (276) (366) (499) N3 150 270 359 489 (P3) (164) (295) (392) (534) 70 P3 160 288 382 518 (Q3) (174) (312) (415) (562) 6500 K3 130 234 311 424 (M3) (142) (256) (340) (463) 80 (value in bracket): M3 140 252 335 457 (N3) (153) (276) (366) (499) Minimum luminous flux @ 25 C, for reference only Notes: 1) Samsung maintains measurement tolerance of: luminous flux = 7 %, CRI = 3 2) Calculated minimum flux values are for reference only 7 2. Product Code Information 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S P H W H 2 L 3 D 3 0 E D 4 V 0 K 3 Digit 1 2 3 4 5 6 7 8 PKG Information Code Samsung Package High Power SPH Color WH Product Version 2 Specification White Product L3 LH351 Series 9 Lens Type D Dome lens 10 Internal Code 3 11 Not Defined 12 13 15 CRI & Sorting Temperature 14 16 Forward Voltage (V) 0 Default C Min. 70 D Min. 75 E Min. 80 F Min. 85 G Min. 90 D4 2.4~3.0 18 B2 2.4~2.6 D2 2.6~2.8 F2 2.8~3.0 Y 2200 Y1, Y2, Y3, Y4, Y5, Y6, Y7, Y8, Y9, YA, YB, YC, YD, YE, YF, YG, YM 2700 W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG, WM V 3000 V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG, VM U 3500 U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG, UM T 4000 RT 5000 Bin Code: CCT (K) Luminous Flux (lm) Bin Code: W T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG, TM R1, R2, R3, R4 QT 5700 Q1, Q2, Q3, Q4 PQ 6000 P2, Q1, P4, Q3 PT 6500 : 17 85 P1, P2, P3, P4 "0" (Whole bin), "P" (Quarter bin), or "M" (MacAdam 3-step ellipse bin) F3 90~120 F1 90~100 G3 100~130 G1 100~110 H3 110~140 H1 110~120 J3 120~150 J1 120~130 K3 130~160 K1 130~140 M3 140~170 M1 140~150 N3 150~180 N1 150~160 P3 160-190 P1 160~170 Q2 170-190 Q1 170~180 R1 180-190 Digit 17: F3 Min. spec. Digit 18: The number of higher bin(s) from min. spec. e.g.: K1 = 130~140 lm, K3 = 130~160 lm G3 H3 J3 K3 M3 N3 8 a) Luminous Flux Bins (IF = 350 mA, Tj = 85 C) Nominal CCT (K) CRI (Ra) Min. Product Code Flux Rank 2200 80 SPHWH2L3D30ED4YG3 G3 SPHWH2L3D30CD4WK3 70 SPHWH2L3D30CD4WM3 SPHWH2L3D30CD4WN3 2700 SPHWH2L3D30ED4WJ3 K3 M3 N3 J3 80 SPHWH2L3D30ED4WK3 SPHWH2L3D30GD4WF3 K3 F3 90 SPHWH2L3D30GD4WG3 SPHWH2L3D30CD4VM3 G3 M3 70 SPHWH2L3D30CD4VN3 SPHWH2L3D30ED4VJ3 3000 80 SPHWH2L3D30ED4VK3 SPHWH2L3D30ED4VM3 N3 J3 K3 M3 Flux Bin Flux Range (v, lm) G1 100 ~ 110 H1 110 ~ 120 J1 120 ~ 130 K1 130 ~ 140 M1 140 ~ 150 N1 150 ~ 160 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 N1 150 ~ 160 P1 160 ~ 170 Q1 170 ~ 180 J1 120 ~ 130 K1 130 ~ 140 M1 140 ~ 150 K1 130 ~ 140 M1 140 ~ 150 N1 150 ~ 160 F1 90 ~ 100 G1 100 ~ 110 H1 110 ~ 120 G1 100 ~ 110 H1 110 ~ 120 J1 120 ~ 130 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 N1 150 ~ 160 P1 160 ~ 170 Q1 170 ~ 180 J1 120 ~ 130 K1 130 ~ 140 M1 140 ~ 150 K1 130 ~ 140 M1 140 ~ 150 N1 150 ~ 160 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 "" can be "0" (Whole bin), "P" (Quarter bin), or "M" (MacAdam 3-step ellipse bin) of the color binning 9 a) Luminous Flux Bins Nominal CCT (K) 3000 CRI (Ra) Min. (IF = 350 mA, Tj = 85 C) Product Code Flux Rank SPHWH2L3D30GD4VG3 G3 90 SPHWH2L3D30GD4VH3 SPHWH2L3D30CD4UK3 70 SPHWH2L3D30CD4UM3 SPHWH2L3D30CD4UN3 SPHWH2L3D30ED4UK3 3500 H3 K3 M3 N3 K3 Flux Bin Flux Range (v, lm) G1 100 ~ 110 H1 110 ~ 120 J1 120 ~ 130 H1 110 ~ 120 J1 120 ~ 130 K1 130 ~ 140 K1 130 ~ 140 M1 140 ~ 150 N1 150 ~ 160 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 N1 150 ~ 160 P1 160 ~ 170 Q1 170 ~ 180 K1 130 ~ 140 M1 140 ~ 150 N1 150 ~ 160 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 G1 100 ~ 110 H1 110 ~ 120 J1 120 ~ 130 80 SPHWH2L3D30ED4UM3 SPHWH2L3D30GD4UG3 M3 G3 90 SPHWH2L3D30GD4UH3 SPHWH2L3D30CD4TN3 4000 H3 N3 H1 110 ~ 120 J1 120 ~ 130 K1 130 ~ 140 N1 150 ~ 160 P1 160 ~ 170 Q1 170 ~ 180 P1 160 ~ 170 Q1 170 ~ 180 R1 180 ~ 190 70 SPHWH2L3D30CD4TP3 P3 "" can be "0" (Whole bin), "P" (Quarter bin), or "M" (MacAdam 3-step ellipse bin) of the color binning 10 a) Luminous Flux Bins Nominal CCT (K) CRI (Ra) Min. (IF = 350 mA, Tj = 85 C) Product Code Flux Rank Flux Bin Flux Range (v, lm) K1 130 ~ 140 SPHWH2L3D30ED4TK3 K3 M1 140 ~ 150 N1 150 ~ 160 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 80 SPHWH2L3D30ED4TM3 M3 4000 SPHWH2L3D30GD4T0J3 J3 J1 120 ~ 130 K1 130 ~ 140 M1 140 ~ 150 J1 120 ~ 130 90 SPHWH2L3D30GD4TPJ3 SPHWH2L3D30CD4RTM3 SPHWH2L3D30CD4RTN3 J3 M3 N3 70 SPHWH2L3D30CD4RTP3 5000 SPHWH2L3D30CD4RTQ2 SPHWH2L3D30ED4RTM3 P3 K1 130 ~ 140 M1 140 ~ 150 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 N1 150 ~ 160 P1 160 ~ 170 Q1 170 ~ 180 P1 160 ~ 170 Q1 170 ~ 180 R1 180 ~ 190 Q1 170 ~ 180 R1 180 ~ 190 M1 140 ~ 150 N1 150 ~ 160 Q2 M3 P1 160 ~ 170 N1 150 ~ 160 80 SPHWH2L3D30ED4RTN3 90 SPHWH2L3D30GD4RTK3 N3 K3 P1 160 ~ 170 Q1 170 ~ 180 K1 130 ~ 140 M1 140 ~ 150 N1 150 ~ 160 "" can be "0" (Whole bin), "P" (Quarter bin), or "M" (MacAdam 3-step ellipse bin) of the color binning 11 a) Luminous Flux Bins Nominal CCT (K) CRI (Ra) Min. (IF = 350 mA, Tj = 85 C) Product Code SPHWH2L3D30CD4QTN3 Flux Rank N3 Flux Bin Flux Range (v, lm) N1 150 ~ 160 P1 160 ~ 170 Q1 170 ~ 180 70 5700 SPHWH2L3D30CD4QTP3 80 SPHWH2L3D30ED4QTM3 SPHWH2L3D30ED4PQK3 6000 P3 M3 K3 P1 160 ~ 170 Q1 170 ~ 180 R1 180 ~ 190 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 K1 130 ~ 140 M1 140 ~ 150 N1 150 ~ 160 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 N1 150 ~ 160 80 SPHWH2L3D30ED4PQM3 SPHWH2L3D30CD4PTN3 M3 N3 P1 160 ~ 170 Q1 170 ~ 180 P1 160 ~ 170 Q1 170 ~ 180 R1 180 ~ 190 K1 130 ~ 140 M1 140 ~ 150 N1 150 ~ 160 M1 140 ~ 150 N1 150 ~ 160 P1 160 ~ 170 70 SPHWH2L3D30CD4PTP3 P3 6500 SPHWH2L3D30ED4PTK3 K3 80 SPHWH2L3D30ED4PTM3 M3 "" can be "0" (Whole bin), "P" (Quarter bin), or "M" (MacAdam 3-step ellipse bin) of the color binning 12 b) Color Bins Nominal CCT (K) 2200 (IF = 350 mA, Tj = 85 C) CRI (Ra) Min. 80 Product Code Color Rank Chromaticity Bins SPHWH2L3D30ED4Y0G3 Y0 (Whole bin) Y1, Y2, Y3, Y4, Y5, Y6, Y7, Y8, Y9, YA, YB, YC, YD, YE, YF, YG SPHWH2L3D30ED4YPG3 YP (Quarter bin) Y6, Y7, YA, YB SPHWH2L3D30ED4YMG3 YM (MacAdam 3-step) YM W0 (Whole bin) W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG WP (Quarter bin) W6, W7, WA, WB WM (MacAdam 3-step) WM W0 (Whole bin) W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG WP (Quarter bin) W6, W7, WA, WB WM (MacAdam 3-step) WM W0 (Whole bin) W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG WP (Quarter bin) W6, W7, WA, WB WM (MacAdam 3-step) WM V0 (Whole bin) V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG VP (Quarter bin) V6, V7, VA, VB VM (MacAdam 3-step) VM V0 (Whole bin) V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG VP (Quarter bin) V6, V7, VA, VB VM (MacAdam 3-step) VM SPHWH2L3D30CD4W0K3 SPHWH2L3D30CD4W0M3 SPHWH2L3D30CD4W0N3 SPHWH2L3D30CD4WPK3 70 SPHWH2L3D30CD4WPM3 SPHWH2L3D30CD4WPN3 SPHWH2L3D30CD4WMK3 SPHWH2L3D30CD4WMM3 SPHWH2L3D30CD4WMN3 SPHWH2L3D30ED4W0J3 2700 SPHWH2L3D30ED4W0K3 80 SPHWH2L3D30ED4WPJ3 SPHWH2L3D30ED4WPK3 SPHWH2L3D30ED4WMJ3 SPHWH2L3D30ED4WMK3 SPHWH2L3D30GD4W0F3 SPHWH2L3D30GD4W0G3 90 SPHWH2L3D30GD4WPF3 SPHWH2L3D30GD4WPG3 SPHWH2L3D30GD4WMF3 SPHWH2L3D30GD4WMG3 SPHWH2L3D30CD4V0M3 SPHWH2L3D30CD4V0N3 70 SPHWH2L3D30CD4VPM3 SPHWH2L3D30CD4VPN3 SPHWH2L3D30CD4VMM3 SPHWH2L3D30CD4VMN3 SPHWH2L3D30ED4V0J3 3000 SPHWH2L3D30ED4V0K3 SPHWH2L3D30ED4V0M3 SPHWH2L3D30ED4VPJ3 80 SPHWH2L3D30ED4VPK3 SPHWH2L3D30ED4VPM3 SPHWH2L3D30ED4VMJ3 SPHWH2L3D30ED4VMK3 SPHWH2L3D30ED4VMM3 13 b) Color Bins Nominal CCT (K) (IF = 350 mA, Tj = 85 C) CRI (Ra) Min. Product Code Color Rank Chromaticity Bins SPHWH2L3D30GD4V0G3 V0 (Whole bin) V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG VP (Quarter bin) V6, V7, VA, VB VM (MacAdam 3-step) VM U0 (Whole bin) U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG UP (Quarter bin) U6, U7, UA, UB UM (MacAdam 3-step) UM U0 (Whole bin) U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG UP (Quarter bin) U6, U7, UA, UB UM (MacAdam 3-step) UM U0 (Whole bin) U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG UP (Quarter bin) U6, U7, UA, UB UM (MacAdam 3-step) UM T0 (Whole bin) T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG TP (Quarter bin) T6, T7, TA, TB TM (MacAdam 3-step) TM T0 (Whole bin) T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG TP (Quarter bin) T6, T7, TA, TB TM (MacAdam 3-step) TM SPHWH2L3D30GD4V0H3 3000 90 SPHWH2L3D30GD4VPG3 SPHWH2L3D30GD4VPH3 SPHWH2L3D30GD4VMG3 SPHWH2L3D30GD4VMH3 SPHWH2L3D30CD4U0K3 SPHWH2L3D30CD4U0M3 SPHWH2L3D30CD4U0N3 SPHWH2L3D30CD4UPK3 70 SPHWH2L3D30CD4UPM3 SPHWH2L3D30CD4UPN3 SPHWH2L3D30CD4UMK3 SPHWH2L3D30CD4UMM3 SPHWH2L3D30CD4UMN3 SPHWH2L3D30ED4U0K3 3500 SPHWH2L3D30ED4U0M3 80 SPHWH2L3D30ED4UPK3 SPHWH2L3D30ED4UPM3 SPHWH2L3D30ED4UMK3 SPHWH2L3D30ED4UMM3 SPHWH2L3D30GD4U0G3 SPHWH2L3D30GD4U0H3 90 SPHWH2L3D30GD4UPG3 SPHWH2L3D30GD4UPH3 SPHWH2L3D30GD4UMG3 SPHWH2L3D30GD4UMH3 SPHWH2L3D30CD4T0N3 SPHWH2L3D30CD4T0P3 70 SPHWH2L3D30CD4TPN3 SPHWH2L3D30CD4TPP3 SPHWH2L3D30CD4TMN3 SPHWH2L3D30CD4TMP3 4000 SPHWH2L3D30ED4T0K3 SPHWH2L3D30ED4T0M3 80 SPHWH2L3D30ED4TPK3 SPHWH2L3D30ED4TPM3 SPHWH2L3D30ED4TMK3 SPHWH2L3D30ED4TMM3 14 b) Color Bins (IF = 350 mA, Tj = 85 C) Nominal CCT (K) 4000 CRI (Ra) Min. Product Code Color Rank Chromaticity Bins SPHWH2L3D30GD4T0J3 T0 (Whole bin) T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG SPHWH2L3D30GD4TPJ3 TP (Quarter bin) T6, T7, TA, TB RT (Half bin) R1, R2, R3, R4 QT (Half bin) Q1, Q2, Q3, Q4 PQ (Half bin) Q1, Q3, P2, P4 PT (Half bin) P1, P2, P3, P4 90 SPHWH2L3D30CD4RTM3 SPHWH2L3D30CD4RTN3 70 SPHWH2L3D30CD4RTP3 5000 SPHWH2L3D30CD4RTQ2 SPHWH2L3D30ED4RTM3 80 SPHWH2L3D30ED4RTN3 90 SPHWH2L3D30GD4RTK3 SPHWH2L3D30CD4QTN3 70 5700 SPHWH2L3D30CD4QTP3 80 SPHWH2L3D30ED4QTM3 SPHWH2L3D30ED4PQK3 6000 80 SPHWH2L3D30ED4PQM3 SPHWH2L3D30CD4PTN3 70 SPHWH2L3D30CD4PTP3 6500 SPHWH2L3D30ED4PTK3 80 SPHWH2L3D30ED4PTM3 c) Voltage Bins Nominal CCT (K) - (IF = 350 mA, Tj = 85 C) CRI (Ra) Min. - Product Code - Voltage Rank D4 Voltage Bin Voltage Range (V) B2 2.4 ~ 2.6 D2 2.6 ~ 2.8 F2 2.8 ~ 3.0 15 d) Chromaticity Region & Coordinates (IF = 350 mA, Tj = 85 C) 16 d) Chromaticity Region & Coordinates Region CIE x CIE y Region (IF = 350 mA, Tj = 85 C) CIE x CIE y Region CIE x Y rank (2200 K) 0.4805 0.3968 0.4854 0.3968 Y1 CIE y Region CIE x CIE y 0.4465 0.4071 0.4513 0.4164 W rank (2700 K) 0.4925 0.4156 0.4976 0.4156 Y9 0.4373 0.3893 0.4418 0.3981 W1 W9 0.4915 0.4062 0.5038 0.4250 0.4475 0.3994 0.4573 0.4178 0.4865 0.4062 0.4984 0.4250 0.4428 0.3906 0.4523 0.4085 0.4854 0.3968 0.4976 0.4156 0.4428 0.3906 0.4523 0.4085 0.4903 0.3969 0.5028 0.4156 0.4475 0.3994 0.4573 0.4178 Y2 YA W2 WA 0.4966 0.4062 0.5091 0.4249 0.4532 0.4008 0.4634 0.4193 0.4915 0.4062 0.5038 0.4250 0.4483 0.3919 0.4582 0.4099 0.4903 0.3969 0.5028 0.4156 0.4483 0.3919 0.4582 0.4099 0.4952 0.3969 0.5080 0.4156 0.4532 0.4008 0.4634 0.4193 Y3 YB W3 WB 0.5016 0.4062 0.5145 0.4249 0.4589 0.4021 0.4695 0.4207 0.4966 0.4062 0.5091 0.4249 0.4538 0.3931 0.4641 0.4112 0.4952 0.3969 0.5080 0.4156 0.4538 0.3931 0.4641 0.4112 0.5000 0.3969 0.5132 0.4156 0.4589 0.4021 0.4695 0.4207 Y4 YC W4 WC 0.5066 0.4062 0.5198 0.4249 0.4646 0.4034 0.4756 0.4221 0.5016 0.4062 0.5145 0.4249 0.4593 0.3944 0.4700 0.4126 0.4865 0.4062 0.4984 0.4250 0.4418 0.3981 0.4513 0.4164 0.4915 0.4062 0.5038 0.4250 0.4465 0.4071 0.4562 0.4260 Y5 YD W5 WD 0.4976 0.4156 0.5099 0.4344 0.4523 0.4085 0.4624 0.4274 0.4925 0.4156 0.5044 0.4344 0.4475 0.3994 0.4573 0.4178 0.4915 0.4062 0.5038 0.4250 0.4475 0.3994 0.4573 0.4178 0.4966 0.4062 0.5091 0.4249 0.4523 0.4085 0.4624 0.4274 Y6 YE W6 WE 0.5028 0.4156 0.5154 0.4343 0.4582 0.4099 0.4687 0.4289 0.4976 0.4156 0.5099 0.4344 0.4532 0.4008 0.4634 0.4193 0.4966 0.4062 0.5091 0.4249 0.4532 0.4008 0.4634 0.4193 0.5016 0.4062 0.5145 0.4249 0.4582 0.4099 0.4687 0.4289 Y7 YF W7 WF 0.508 0.4156 0.5209 0.4342 0.4641 0.4112 0.4750 0.4304 0.5028 0.4156 0.5154 0.4343 0.4589 0.4021 0.4695 0.4207 0.5016 0.4062 0.5145 0.4249 0.4589 0.4021 0.4695 0.4207 0.5066 0.4062 0.5198 0.4249 0.4641 0.4112 0.4750 0.4304 Y8 YG W8 WG 0.5132 0.4156 0.5264 0.4342 0.4700 0.4126 0.4813 0.4319 0.5080 0.4156 0.5209 0.4342 0.4646 0.4034 0.4756 0.4221 17 d) Chromaticity Region & Coordinates Region CIE x CIE y Region CIE x CIE y Region CIE x V rank (3000 K) 0.4147 0.3814 0.4183 0.3898 V1 CIE y Region CIE x CIE y 0.3941 0.3848 0.3968 0.3930 U rank (3500 K) 0.4221 0.3984 0.4259 0.4073 V9 0.3889 0.3690 0.3915 0.3768 U1 U9 0.4242 0.3919 0.4322 0.4096 0.3981 0.3800 0.4040 0.3966 0.4203 0.3833 0.4281 0.4006 0.3953 0.3720 0.4010 0.3882 0.4203 0.3833 0.4281 0.4006 0.3953 0.3720 0.4010 0.3882 0.4242 0.3919 0.4322 0.4096 0.3981 0.3800 0.4040 0.3966 V2 VA U2 UA 0.4300 0.3939 0.4385 0.4119 0.4048 0.3832 0.4113 0.4001 0.4259 0.3853 0.4342 0.4028 0.4017 0.3751 0.4080 0.3916 0.4259 0.3853 0.4342 0.4028 0.4017 0.3751 0.4080 0.3916 0.4300 0.3939 0.4385 0.4119 0.4048 0.3832 0.4113 0.4001 V3 VB U3 UB 0.4359 0.3960 0.4449 0.4141 0.4116 0.3865 0.4186 0.4037 0.4316 0.3873 0.4403 0.4049 0.4082 0.3782 0.4150 0.3950 0.4316 0.3873 0.4403 0.4049 0.4082 0.3782 0.4150 0.3950 0.4359 0.3960 0.4449 0.4141 0.4116 0.3865 0.4186 0.4037 V4 VC U4 UC 0.4418 0.3981 0.4513 0.4164 0.4183 0.3898 0.4259 0.4073 0.4373 0.3893 0.4465 0.4071 0.4147 0.3814 0.4221 0.3984 0.4183 0.3898 0.4259 0.4073 0.3915 0.3768 0.3968 0.3930 0.4221 0.3984 0.4299 0.4165 0.3941 0.3848 0.3996 0.4015 V5 VD U5 UD 0.4281 0.4006 0.4364 0.4188 0.4010 0.3882 0.4071 0.4052 0.4242 0.3919 0.4322 0.4096 0.3981 0.3800 0.4040 0.3966 0.4242 0.3919 0.4322 0.4096 0.3981 0.3800 0.4040 0.3966 0.4281 0.4006 0.4364 0.4188 0.4010 0.3882 0.4071 0.4052 V6 VE U6 UE 0.4342 0.4028 0.4430 0.4212 0.4080 0.3916 0.4146 0.4089 0.4300 0.3939 0.4385 0.4119 0.4048 0.3832 0.4113 0.4001 0.4300 0.3939 0.4385 0.4119 0.4048 0.3832 0.4113 0.4001 0.4342 0.4028 0.4430 0.4212 0.4080 0.3916 0.4146 0.4089 V7 VF U7 UF 0.4403 0.4049 0.4496 0.4236 0.4150 0.3950 0.4222 0.4127 0.4359 0.3960 0.4449 0.4141 0.4116 0.3865 0.4186 0.4037 0.4359 0.3960 0.4449 0.4141 0.4116 0.3865 0.4186 0.4037 0.4403 0.4049 0.4496 0.4236 0.4150 0.3950 0.4222 0.4127 V8 VG U8 UG 0.4465 0.4071 0.4562 0.4260 0.4221 0.3984 0.4299 0.4165 0.4418 0.3981 0.4513 0.4164 0.4183 0.3898 0.4259 0.4073 18 d) Chromaticity Region & Coordinates Region CIE x CIE y Region CIE x CIE y 0.3702 0.3722 0.3763 0.3760 T rank (4000 K) 0.3670 0.3578 0.3726 0.3612 T1 T9 0.3744 0.3685 0.3782 0.3837 0.3686 0.3649 0.3719 0.3797 0.3726 0.3612 0.3763 0.3760 0.3783 0.3646 0.3825 0.3798 T2 TA 0.3804 0.3721 0.3847 0.3877 0.3744 0.3685 0.3782 0.3837 0.3783 0.3646 0.3825 0.3798 0.3840 0.3681 0.3887 0.3836 T3 TB 0.3863 0.3758 0.3912 0.3917 0.3804 0.3721 0.3847 0.3877 0.3840 0.3681 0.3887 0.3837 0.3898 0.3716 0.3950 0.3875 T4 TC 0.3924 0.3794 0.3978 0.3958 0.3863 0.3758 0.3912 0.3917 0.3686 0.3649 0.3719 0.3797 0.3744 0.3685 0.3782 0.3837 T5 TD 0.3763 0.3760 0.3802 0.3916 0.3702 0.3722 0.3736 0.3874 0.3744 0.3685 0.3782 0.3837 0.3804 0.3721 0.3847 0.3877 T6 TE 0.3825 0.3798 0.3869 0.3958 0.3763 0.3760 0.3802 0.3916 0.3804 0.3721 0.3847 0.3877 0.3863 0.3758 0.3912 0.3917 T7 TF 0.3887 0.3836 0.3937 0.4001 0.3825 0.3798 0.3869 0.3958 0.3863 0.3758 0.3912 0.3917 0.3924 0.3794 0.3978 0.3958 T8 TG 0.3950 0.3875 0.4006 0.4044 0.3887 0.3836 0.3937 0.4001 19 d) Chromaticity Region & Coordinates Region CIE x CIE y Region R rank (5000 K) 0.3371 0.3490 0.3451 0.3554 R1 CIE x QR rank CIE y Region (5300 K) 0.3290 0.3417 0.3371 0.3490 Q2 CIE x Q rank CIE y Region (5700 K) 0.3215 0.3350 0.3290 0.3417 CIE x CIE y PQ rank (6000 K) Q1 0.3144 0.3186 0.3221 0.3261 P2 Region CIE x P rank CIE y (6500 K) 0.3068 0.3113 0.3144 0.3186 P1 0.344 0.3427 0.3366 0.3369 0.3290 0.330 0.3213 0.3373 0.3130 0.329 0.3366 0.3369 0.3290 0.3300 0.3222 0.3243 0.3130 0.3290 0.3048 0.3207 0.3451 0.3554 0.3371 0.3490 0.3290 0.3417 0.3215 0.335 0.3144 0.3186 0.3533 0.3620 0.3451 0.3554 0.3371 0.3490 0.3290 0.3417 0.3221 0.3261 R2 R1 Q2 Q1 P2 0.3515 0.3487 0.3440 0.3427 0.3366 0.3369 0.3290 0.3300 0.3213 0.3373 0.3440 0.3427 0.3366 0.3369 0.3290 0.3300 0.3222 0.3243 0.3130 0.3290 0.3376 0.3616 0.3290 0.3538 0.3207 0.3462 0.3130 0.3290 0.3048 0.3207 0.3463 0.3687 0.3376 0.3616 0.3290 0.3538 0.3213 0.3373 0.3130 0.3290 R3 Q4 Q3 P4 P3 0.3451 0.3554 0.3371 0.3490 0.3290 0.3417 0.3205 0.3481 0.3115 0.3391 0.3371 0.349 0.3290 0.3417 0.3215 0.3350 0.3115 0.3391 0.3028 0.3304 0.3463 0.3687 0.3376 0.3616 0.3290 0.3538 0.3207 0.3462 0.3130 0.3290 0.3551 0.3760 0.3463 0.3687 0.3376 0.3616 0.3290 0.3538 0.3213 0.3373 R4 R3 Q4 Q3 P4 0.3533 0.3620 0.3451 0.3554 0.3371 0.3490 0.3290 0.3417 0.3205 0.3481 0.3451 0.3554 0.3371 0.3490 0.3290 0.3417 0.3215 0.3350 0.3115 0.3391 e) MacAdam 3-step Ellipse (IF = 350 mA, Tj = 85 C) Center Nom. CCT (K) Color Rank CIE x CIE y Rotation Angle () a b 2200 YM 0.5018 0.4153 53.45 0.0072 0.0040 2700 WM 0.4578 0.4101 53.70 0.0081 0.0042 3000 VM 0.4338 0.4030 53.22 0.0083 0.0041 3500 UM 0.4073 0.3917 54.00 0.0093 0.0041 4000 TM 0.3818 0.3797 53.72 0.0094 0.0040 CIE x,y Note: Samsung maintains measurement tolerance of: Cx, Cy = 0.005 20 3. Typical Characteristics Graphs a) Spectrum Distribution (IF = 350 mA, Tj = 85 C) Cool White (CRI70) Warm White (CRI80) Warm White (CRI90) b) Forward Current Characteristics (Tj = 85 C) 21 c) Temperature Characteristics d) Color Shift Characteristics (IF = 350 mA) (IF = 350 mA, Tj = 85 C) e) Derating Curve and Beam Angle Characteristics (IF = 350 mA, Tj = 25 C) 22 4. Outline Drawing & Dimension Anode Cathode Measurement unit: Tolerance: mm 0.13 mm Recommended Soldering Pattern Notes: 1) This LED has built-in ESD protection device(s) connected in parallel to LED chip(s). 2) The thermal pad is electrically isolated from the anode and cathode contact pads. 3) Ts point and measurement method: Measure the nearest point to thermal pad as shown above. If necessary, remove PSR of PCB to reach Ts point. All pads must be soldered to the PCB to dissipate heat properly, otherwise the LED can be damaged. Precautions: 1) Pressure on the LEDs will influence to the reliability of the LEDs. Precautions should be taken to avoid strong pressure on the LEDs. Do not put stress on the LEDs during heating. 2) Re-soldering should not be done after the LEDs have been soldered. If re-soldering is unavoidable, LEDs characteristics should be carefully checked before and after such repair. 3) Do not stack assembled PCBs together. Since materials of LEDs is soft, abrasion between two PCB assembled with LED might cause catastrophic failure of the LEDs. 23 5. Reliability Test Items & Conditions a) Test Items Test Item Test Condition Test Hour / Cycle Sample Size Room Temperature Life Test 25 C, , Maximum Rated Drive Current 1000 h 22 High Temperature Life Test 85 C, , Maximum Rated Drive Current 1000 h 22 High Temperature Humidity Life Test 85 C, 85 % RH, , Maximum Rated Drive Current 1000 h 22 Low Temperature Life Test -40 C, , Maximum Rated Drive Current 1000 h 22 Damp Heat Cycling -10 C 25 C 95 % RH 65 C 95 % RH , Maximum Rated Drive Current, 24 h / 1 cycle 10 cycles 11 Powered Temperature Cycle -40 C / 85 C each 20 min, 100 min transfer power on/off each 5 min, , Maximum Rated Drive Current 100 cycles 11 Temperature Cycling -45 C / 15 min 125 C / 15 min temperature change within 5 min 500 cycles 100 High Temperature Storage 120 C 1000 h 11 Low Temperature Storage -40 C 1000 h 11 5 times 30 5 times 30 R1: 10 M R2: 1.5 k C: 100 pF ESD (HBM) V: 8 kV R1: 10 M R 2: 0 ESD (MM) C: 200 pF V: 0.5 kV Vibration Test 20~2000~20 Hz, 200 m/s2, sweep 4 min X, Y, Z 3 direction, each 1 cycle 4 cycles 11 Mechanical Shock Test 1500 g, 0.5 ms 3 shocks each X-Y-Z axis 5 cycles 11 b) Criteria for Judging the Damage Item Symbol Limit Test Condition (Tj = 25 C) Min. Max. Forward Voltage VF IF = 350 mA Init. Value * 0.9 Init. Value * 1.1 Luminous Flux v IF = 350 mA Init. Value * 0.7 Init. Value * 1.1 24 6. Soldering Conditions a) Reflow Conditions (Pb free) Reflow frequency: 2 times max. b) Manual Soldering Conditions Not more than 5 seconds @ max. 300 C, under soldering iron. 25 7. Tape & Reel a) Taping Dimension (unit: mm) Taping Direction 26 b) Reel Dimension (unit: mm) Notes: 1) Quantity: The quantity/reel is 1,000 pcs 2) Cumulative tolerance: Cumulative tolerance / 10 pitches is 0.2 mm 3) Adhesion strength of cover tape: Adhesion strength is 0.1-0.7 N when the cover tape is turned off from the carrier tape at 10 angle to the carrier tape 4) Packaging: P/N, Manufacturing data code no. and quantity are indicated on the aluminum packing bag 27 8. Label Structure a) Label Structure D2V1K1 Bin Code SPHWH2L3D30ED4V0K3 D2V1K1 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Product Code GLAY94001 / I001 / 1,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Lot Number Note: Denoted bin code and product code above is only an example (see description on page 7) Bin Code: : Forward Voltage bin : Chromaticity bin : Luminous Flux bin (refer to page 15) (refer to page 16-19) (refer to page 8-11) b) Lot Number The lot number is composed of the following characters: D2V1K1 SPHWH2L3D30ED4V0K3 D2V1K1 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII /I/ 1,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII / I / 1,000 pcs , : Production site : Product state : Year : Month : Day (1~9, A, B~V) : Product serial number : Reel number (GL: Tianjin, China, GB : Nanchang, China) (A: Normal, B: Bulk, C: First Production, R: Reproduction, S: Sample) (Y: 2014, Z: 2015, A: 2016, B: 2017, C: 2018, D: 2019 ...) (1~9, A, B, C) (001 ~ 999) (001 ~ 999) 28 9. Packing Structure a) Packing Process Reel D2V1K1 SPHWH2L3D30ED4V0K3 D2V1K1 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAY94001 / I001 / 1,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Aluminum Vinyl Packing Bag D2V1K1 SPHWH2L3D30ED4V0K3 D2V1K1 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAY94001 / I001 / 1,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Outer Box Material: Paper SW(B) Size (mm) Type Note (a) (b) (c) 7 inch (L) 245 5 220 5 182 5 Up to 8 reels 7 inch (S) 245 5 220 5 86 5 Up to 4 reels D2V1K1 SPHWH2L3D30ED4V0K3 D2V1K1 (c) IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAY94001 / I001 / 8,000 pcs (b) IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII (a) 29 b) Aluminum Vinyl Packing Bag D2V1K1 SPHWH2L3D30ED4V0K3 D2V1K1 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAY94001 / I001 / 1,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII c) Silica Gel & Humidity Indicator Card inside Aluminum Vinyl Bag 30 10. Precautions in Handling & Use 1) For over-current protection, users are recommended to apply resistors connected in series with the LEDs to mitigate sudden change of the forward current caused by shift of forward voltage. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When cleaning is required, IPA is recommended as the cleaning agent. Some solvent-based cleaning agent may damage the silicone resins used in the device. 3) When the device is in operation, the forward current should be carefully determined considering the maximum ambient temperature and corresponding junction temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for three months or more after being shipped from Samsung, they should be packed with a nitrogen-filled container (shelf life of sealed bags is 12 months at temperature 0~40 C, 0~90 % RH). 5) After storage bag is opened, device subjected to soldering, solder reflow, or other high temperature processes must be: a. Mounted within 672 hours (28 days) at an assembly line with a condition of no more than 30 C / 60 % RH, or b. Stored at <10 % RH 6) Repack unused devices with anti-moisture packing, fold to close any opening and then store in a dry place. 7) Devices require baking before mounting, if humidity card reading is >60 % at 23 5 C. 8) Devices must be baked for 1 hour at 60 5 C, if baking is required. 9) The LEDs are sensitive to the static electricity and surge current. It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leakage current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 10) VOCs (Volatile Organic Compounds) can be generated from adhesives, flux, hardener or organic additives used in luminaires (fixtures). Transparent LED silicone encapsulant is permeable to those chemicals and they may lead to a discoloration of encapsulant when they exposed to heat or light. This phenomenon can cause a significant loss of light emitted (output) from the luminaires. In order to prevent these problems, we recommend users to know the physical properties of materials used in luminaires and they must be carefully selected. Legal and additional information. About Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. inspires the world and shapes the future with transformative ideas and technologies, redefining the worlds of TVs, smartphones, wearable devices, tablets, cameras, digital appliances, printers, medical equipment, network systems and semiconductors. We are also leading in the Internet of Things space through, among others, our Digital Health and Smart Home initiatives. We employ 307,000 people across 84 countries. To discover more, please visit our official website at www.samsung.com and our official blog at global.samsungtomorrow.com. Copyright (c) 2016 Samsung Electronics Co., Ltd. All rights reserved. Samsung is a registered trademark of Samsung Electronics Co., Ltd. Specifications and designs are subject to change without notice. Non-metric weights and measurements are approximate. All data were deemed correct at time of creation. Samsung is not liable for errors or omissions. All brand, product, service names and logos are trademarks and/or registered trademarks of their respective owners and are hereby recognized and acknowledged. Samsung Electronics Co., Ltd. 1, Samsung ro Giheung-gu Yongin-si, Gyeonggi-do, 17113 KOREA www.samsungled.com