INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-CPC1217-R05 1
CPC1217
Voltage-Controlled, Single-Pole,
Normally Open, 4-Pin SIP OptoMOS® Relay
e3
Pb
Part # Description
CPC1217Y 4-Pin SIP (8-Pin Body) (25/tube)
Parameter Rating Units
Blocking Voltage 60 VP
Load Current 200 mArms / mADC
On-Resistance (max) 16
Input Voltage to operate 5-12 V
Applications
Features
Description
Ordering Information
Pin Configuration
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Energy Meters
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
• Designed for use in Security Systems Complying
with EN50130-4
• Voltage-Controlled Operation
• 2500Vrms Input/Output Isolation
• 100% Solid State
• Matches Popular Reed Relay Pin-Out
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Immune to Radiated EM Fields
• Small 4-Pin SIP Package
• Auto Pick & Place, Wave Solderable
The CPC1217 is a voltage-controlled, single-pole,
normally open (1-Form-A), optically coupled solid state
relay configuration in a 4-pin Single In-line Package
(SIP). IXYS Integrated Circuits Division's patented
OptoMOS architecture makes available the optically
coupled technology necessary to activate the output's
efficient MOSFET switches while providing a 2500Vrms
input-to-output isolation barrier. Control of the isolated
output is accomplished by means of a highly effective
GaAlAs infrared LED at the input while the internal
resistor in series with the LED enables the input's
voltage-controlled operation.
Because the input is solid state there is no need for
snubbers or "catch" diodes to suppress the inductive
flyback transient voltage normally associated with EMR
coils.
CPC1217 Pinout
Switching Characteristics
of Normally Open Devices
Approvals
• UL 508 Approved Component: File E69938
• CSA Certified Component: Certificate 1172007
Form-A
IF
ILOAD
10%
90%
ton toff
1234
–+
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R05
CPC1217
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Ratings Units
Blocking Voltage 60 VP
Reverse Input Voltage 5 V
Input Control Voltage 15 V
Input Power Dissipation 225 mW
Total Power Dissipation 1800 mW
Isolation Voltage, Input to Output 2500 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 6.67 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current
Continuous VIN=5V IL- - 200 mArms / mAP
Peak t≤10ms ILPK - - ±400 mAP
On-Resistance 1IL=200mA RON --16
Off-State Leakage Current VL=60VPILEAK --1 A
Switching Speeds
Turn-On (Output Closed) VIN=5V, VL=10V ton --5 ms
Turn-Off (Output Open) toff --5
Output Capacitance VIN=0V, VL=50V, f=1MHz COUT -25 - pF
Input Characteristics
Input Control Voltage
Output Closed
IL=200mA VIN
- - 3.75
V
Recommended Operating Range 5 - 12
Output Open 1 - -
Reverse Input Current VIN=-5V IR--10 A
Input Resistor - - 900 1000 1100
Common Characteristics
Capacitance, Input to Output - - - 1 - pF
1 Measurement taken within 1 second of on-time.
Electrical Characteristics @ 25ºC
INTEGRATED CIRCUITS DIVISION
CPC1217
www.ixysic.com 3
R05
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
0.150 0.180 0.210 0.2400.165 0.195 0.225
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-On Time
(N=50, VIN=5V, IL=100mA, TA=25ºC)
0.40 0.46 0.52 0.580.550.490.43
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-Off Time
(N=50, VIN=5V, IL=100mA, TA=25ºC)
35
30
25
20
15
10
5
0
Device Count (N)
On-Resistance (:)
7.00 7.15 7.457.30 7.907.60 7.75
Typical On-Resistance Distribution
(N=50, VIN=5V, IL=100mA, TA=25ºC)
1.17 1.21 1.251.15 1.19 1.23 1.27
Device Count (N)
25
20
15
10
5
0
Typical VIN for Switch Operation
(N=50, IL=100mA, TA=25ºC)
VIN (V)
25
20
15
10
5
0
1.15 1.19 1.231.13 1.17 1.21 1.25
VIN (V)
Device Count (N)
Typical VIN for Switch Dropout
(N=50, IL=100mA, TA=25ºC)
35
30
25
20
15
10
5
084 86 88 9085 87 89
Blocking Voltage (VP)
Device Count (N)
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
VIN (V)
Turn-On (ms)
05101520
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
Typical Turn-On vs. VIN
(IL=100mA)
-40 -20 0 20 40 60 80 100
1.45
1.40
1.35
1.30
1.25
1.20
1.15
Typical VIN for Switch Operation
vs. Temperature
(IL=100mA)
Temperature (ºC)
VIN (V)
VIN = 5V
Turn-On (ms)
-40
0.30
0.27
0.24
0.21
0.18
0.15
0.12
0.09
0.06
0.03
0
-20 0 20 40 60 80 100
Temperature (ºC)
Typical Turn-On vs. Temperature
(IL=100mA)
VIN (V)
Turn-Off (ms)
02 4 6 8 10 12 14 16 18
0.51
0.50
0.49
0.48
0.47
0.46
0.45
0.44
20
Typical Turn-Off vs. VIN
(IL=100mA)
Input Voltage (V)
-40
1.45
1.40
1.35
1.30
1.25
1.20
1.15
-20 0 20 40 60 80 100
Typical VIN for Switch Dropout
vs. Temperature
(IL=100mA)
Temperature (ºC)
Turn-Off (ms)
-40
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-20 0 20 40 60 80 100
VIN = 5V
Temperature (ºC)
Typical Turn-Off vs. Temperature
(IL=100mA)
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R05
CPC1217
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
-40
14
12
10
8
6
4
2
-20 0 20 40 60 80 100
Steady State
VIN = 5V
Temperature (ºC)
On-Resistance (:)
Typical On-Resistance vs. Temperature
(IL=Max Rated @ Temperature)
Load Voltage (V)
Load Current (mA)
200
100
-200
-2.00 -1.50 -0.50 0 1.00 1.50 2.00
150
-100
50
0
-50
-150
-1.00 0.50
Typical Load Current vs. Load Voltage
(VIN=5V, TA=25ºC)
Load Current (mA)
225
200
175
150
125
100
75
50
25
0
Typical Maximum Load Current
vs. Temperature
Temperature (ºC)
-40 -20 0 20 40 60 80 120100
V
IN
= 5V
Blocking Voltage (VP)
-40
94
92
90
88
86
84
82
80
-20 0 20 40 60 80 100
Temperature (ºC)
Typical Blocking Voltage
vs. Temperature
Leakage (PA)
-40
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0
-20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured Across Pins 1&4)
(VL=Max Rated)
Temperature (ºC) Time
Load Current (A)
10Ps
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
1ms100Ps 100ms 1s
10ms 10s 100s
Energy Rating Curve
INTEGRATED CIRCUITS DIVISION
CPC1217
www.ixysic.com 5
R05
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
CPC1217Y MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
CPC1217Y 245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
e3
Pb
INTEGRATED CIRCUITS DIVISION
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1217-R05
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/14/2012
For additional information please visit our website at: www.ixysic.com
6
CPC1217
MECHANICAL DIMENSIONS
DIMENSIONS
mm
(inches)
19.202 ± 0.381
(0.756 ± 0.015)
6.401 ± 0.127
(0.252 ± 0.005)
5.944 ± 0.127
(0.234 ± 0.005)
2.642 ± 0.127
(0.104 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003) 3.251 ± 0.102
(0.128 ± 0.004)
3.302 ± 0.051
(0.130 ± 0.002)
0.254 ± 0.013
(0.010 ± 0.0005)
5.08
(0.200) 10.16
(0.400) 15.24
(0.600)
1.30
(0.051)
FINISHED HOLE
0.80 DIA x4
(0.031 DIA x4)
Pin 1 Pin 7
PCB Hole Pattern
CPC1217Y
