Multilayer Ceramic Capacitors Approval Sheet
Page 3 of 26 ASC_ Automotive Cap_(MT)_022L_DS Sep. 2017
5. EXTERNAL DIMENSIONS
6. GENERAL ELECTRICAL DATA
Dielectric NP0 X7R
Size 0201, 0402, 0603, 0805, 1206, 1210 0402, 0603, 0805, 1206
Capacitance range* 0.1pF to 0.033uF 100pF to 2.2µF
Capacitance tolerance** Cap≤5pF
: A (±0.05pF ), B (±0.1pF), C (±0.25pF)
5pF<Cap<10pF:B (±0.1pF), C (±0.25pF), D (±0.5pF)
Cap≥10pF: F (±1%), G (±2%), J (±5%) J (±5%), K (±10%), M (±20%)
Rated voltage (WVDC) 10V, 16V, 25V, 50V, 100V, 200V, 250, 500, 630, 1000
Operating temperature -55 to +125°C
Capacitance characteristic ±30ppm/°C ±15%
Termination Ni/Sn (lead-free termination)
#1: NP0, 0.1pF product only provide B tolerance.
* Measured at the condition of 30~70% related humidity.
NP0: Apply 1.0±0.2Vrms, 1.0MHz±10% for Cap≤1000pF and 1.0±0.2Vrms, 1.0kHz±10% for Cap>1000pF, 25°C at ambient temperature
Measured at 1.0±0.2Vrms, 1.0kHz±10% for C≤10µF; 0.5±0.2Vrms, 120Hz±20% for C>10µF, 30~70% related humidity, 25°C ambient
temperature for X7R.
** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour, then leave in ambient condition for 24±2 hours
before measurement.
T
W
M
M
Fig. 1 The outline of MLCC
L (mm) W (mm) T (mm)/Symbol Remark
M
B
(mm)
0201 (0603)
0.60±0.03 0.30±0.03 0.30±0.03 L
# 0.15±0.05
0402 (1005)
1.00±0.05 0.50±0.05 0.50±0.05 N
# 0.25
+0.05/-0.10
0603 (1608)
1.60±0.10 0.80±0.10 0.80±0.07 S
0.40±0.15
1.60
+0.15/-0.10
0.80
+0.15/-0.10
0.80
+0.15/-0.10 X
0805 (2012)
2.00±0.15 1.25±0.10 0.60±0.10 A
0.50±0.20
0.80±0.10 B
1.25±0.10 D
#
2.00±0.20 1.25±0.20 1.25±0.20 I
#
1206 (3216)
3.20±0.15 1.60±0.15
0.80±0.10 B
0.60±0.20
0.95±0.10 C
1.25±0.10 D
#
3.20±0.20 1.15±0.15 J
#
1.60±0.20 1.60±0.20 G
#
3.20+0.3/-0.1
1.60+0.3/0.1
1.60+0.30/-0.10
P
#
1210 (3225)
3.20±0.30 2.50±0.20 0.95±0.10 C
#
0.75±0.25
1.25±0.10 D
#
3.20±0.40 2.50±0.30 1.60±0.20 G
#
2.00±0.20 K
#
2.50±0.30 M
#
# Reflow soldering only is recommended.