Sie sind hier: Main page » Catalogue » GPS Antenna Modules » 4037735105324
eCommerce Engine © 2006 xt:Commerce Shopsoftware
Parse Time: 0.136s
[Next>] | 2 Articles in this categorie
GNS 502 GPS chip antenna Module
TI NL5500 chip
Product No.:4037735105324
Shipping time: 1 Week
The new GNS502 is an easy to implement and very economical complete GPS receiver that is based on Texas Instrument’s CC4000 chipset. Implementation is mad
because all antenna circuitry is already implemented.
GNS502 integrates a complete GPS receiver that minimize the load on the host processor
GPS engine, TCXO clock, an internal LNA and a high efficient chip antenna with an additional LNA stage are all integrated in the module. Adding a single power
a 32.768kHz clock is all that is needed to operate.
Low power requirements (45mA /80mW full power tracking current), small size, highest sensitivity make this solution an economical choice for GPS-only applicat
Further energy savings can be achieved by using one of the internal power saving functions.
The module measures just 15.7 by 10 by 2.0 mm.
GNS502 offers the industry’s highest level of navigation sensitivity down to -163dBm*. It has superior dynamic performance at high velocity and provides effectiv
against interference signals.
An Evaluation board (GNS502 StarterKit) for test and demonstration is also available. It allows quick testing over USB data and power connection.
The firmware can be updated over the standard UART connection. GNS provides a tool for use with PC.
Features
• 16 tracking / 40 acquisition channels
• high tracking/navigation sensitivity: -163dBm
• Extremely fast TTFF
• High accuracy 1PPS output
• NMEA-0183 or binary protocol
• Low Power operating modes
• Hibernate current consumption 80µA typical
• Small form factor: 15.7x10.0x2.1 mm
This Product was added to our catalogue on Thursday, 20. June 2013.
1 of 1
