MBR0530T1, MBR0530T3 Preferred Devices Surface Mount Schottky Power Rectifier Plastic SOD-123 Package . . . using the Schottky Barrier principle with a large area metal-to-silicon power diode. Ideally suited for low voltage, high frequency rectification or as free wheeling and polarity protection diodes in surface mount applications where compact size and weight are critical to the system. This package also provides an easy to work with alternative to leadless 34 package style. These state-of-the-art devices have the following features: * * * * * Guardring for Stress Protection Low Forward Voltage 125C Operating Junction Temperature Epoxy Meets UL94, VO at 1/8 Package Designed for Optimal Automated Board Assembly http://onsemi.com SCHOTTKY BARRIER RECTIFIER 0.5 AMPERES 30 VOLTS Mechanical Characteristics * Reel Options: MBR0530T1 = 3,000 per 7 reel/8 mm tape * * * * * * Reel Options: MBR0530T3 = 10,000 per 13 reel/8 mm tape Device Marking: B3 Polarity Designator: Cathode Band Weight: 11.7 mg (approximately) Case: Epoxy, Molded Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds SOD-123 CASE 425 STYLE 1 MARKING DIAGRAM B3 B3 = Device Code MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 30 V Average Rectified Forward Current (Rated VR, TL = 100C) IF(AV) 0.5 A Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 5.5 A Storage Temperature Range Tstg -65 to +125 C TJ -65 to +125 C dv/dt 1000 V/s Operating Junction Temperature Voltage Rate of Change (Rated VR) Semiconductor Components Industries, LLC, 2000 October, 2000 - Rev. 2 ORDERING INFORMATION 1 Device Package Shipping MBR0530T1 SOD-123 3000/Tape & Reel MBR0530T3 SOD-123 10,000/Tape & Reel Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MBR0530T1/D MBR0530T1, MBR0530T3 THERMAL CHARACTERISTICS Rating Symbol Value Unit Thermal Resistance -- Junction to Ambient (Note 1.) RJA 206 C/W Thermal Resistance -- Junction to Lead RJL 150 C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 2.) (iF = 0.1 Amps, TJ = 25C) (iF = 0.5 Amps, TJ = 25C) vF Maximum Instantaneous Reverse Current (Note 2.) (Rated dc Voltage, TC = 25C) (VR = 15 V, TC = 25C) IR Volts 0.375 0.43 A 130 20 104 TJ = 125C 75C 25C I R, REVERSE CURRENT (A) 1 -40C 0.1 TJ = 125C 1000 100 75C 10 25C 1 0.01 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0 5 10 15 20 25 30 vF, INSTANTANEOUS VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current 180 TYPICAL CAPACITANCE AT 0 V = 170 pF 160 C, CAPACITANCE (pF) iF, INSTANTANEOUS FORWARD CURRENT (AMPS) 1. 1 inch square pad size (1 x 0.5 inch for each lead) on FR4 board. 2. Pulse Test: Pulse Width = 300 s, Duty Cycle 2%. 140 120 100 80 60 40 20 0 5 10 15 20 VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Capacitance http://onsemi.com 2 25 30 35 40 MBR0530T1, MBR0530T3 0.875 P F(AV), AVERAGE POWER DISSIPATION (WATT) AVERAGE FORWARD CURRENT (AMP) 1 DC 0.75 0.625 SQUARE WAVE 0.5 = 0.375 =5 0.25 = 10 0.125 Ipk/Iav = 20 0 60 67 74 81 88 95 102 109 116 0.35 0.315 TJ = 125C SQUARE WAVE 0.28 =5 = 10 0.21 Ipk/Iav = 20 0.175 0.14 0.105 0.07 0.035 0 123 130 0 0.1 0.2 0.3 0.4 0.5 0.6 LEAD TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMP) Figure 4. Current Derating (Lead) Figure 5. Power Dissipation RECOMMENDED FOOTPRINT FOR SOD-123 EEEE EEEE EEEE EEEE EEEE EEE EEE EEE EEE EEE 0.91 0.036 2.36 0.093 4.19 0.165 SOD-123 http://onsemi.com 3 DC = 0.245 1.22 0.048 mm inches 0.7 0.8 MBR0530T1, MBR0530T3 PACKAGE DIMENSIONS SOD-123 PLASTIC CASE 425-04 ISSUE C A AAA AAA C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. H 1 K DIM A B C D E H J K B MILLIMETERS MIN MAX 1.40 1.80 2.55 2.85 0.95 1.35 0.50 0.70 0.25 --0.00 0.10 --0.15 3.55 3.85 E 2 D INCHES MIN MAX 0.055 0.071 0.100 0.112 0.037 0.053 0.020 0.028 0.004 --0.000 0.004 --0.006 0.140 0.152 STYLE 1: PIN 1. CATHODE 2. ANODE J ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MBR0530T1/D