BC817 / BC818 BC817 / BC818 Surface Mount General Purpose Si-Epi-Planar Transistors Si-Epi-Planar Universaltransistoren fur die Oberflachenmontage NPN NPN Version 2007-04-13 Power dissipation - Verlustleistung 1.1 2.9 0.1 0.4 Plastic case Kunststoffgehause 1 1.30.1 2.5 max 3 Type Code 310 mW 2 1.9 Dimensions - Mae [mm] 1=B 2=E 3=C SOT-23 (TO-236) Weight approx. - Gewicht ca. 0.01 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Maximum ratings (TA = 25C) Grenzwerte (TA = 25C) BC817 BC818 Collector-Emitter-volt. - Kollektor-Emitter-Spannung E-B short VCES 50 V 30 V Collector-Emitter-volt. - Kollektor-Emitter-Spannung B open VCEO 45 V 25 V Emitter-Base-voltage - Emitter-Basis-Spannung C open VEBO 5V Power dissipation - Verlustleistung Ptot 310 mW 1) Collector current - Kollektorstrom (dc) IC 800 mA Peak Collector current - Kollektor-Spitzenstrom ICM 1A - IEM 1A Peak Base current - Basis-Spitzenstrom IBM 200 mA Junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -55...+150C -55...+150C Peak Emitter current - Emitter-Spitzenstrom Characteristics (Tj = 25C) Kennwerte (Tj = 25C) Min. Typ. Max. 100 160 250 - - - 250 400 630 40 - - - - 0.7 V - - 1.3 V DC current gain - Kollektor-Basis-Stromverhaltnis 2) VCE = 1 V, IC = 100 mA Group -16 Group -25 Group -40 hFE hFE hFE VCE = 1 V, IC = 500 mA all groups hFE 2 Collector-Emitter saturation voltage - Kollektor-Emitter-Sattigungsspg. ) IC = 500 mA, IB = 50 mA VCEsat 2 Base-Emitter saturation voltage - Basis-Emitter-Sattigungsspannung ) IC = 500 mA, IB = 50 mA 1 2 VBEsat Valid, if leads are kept at ambient temperature at a distance of 2 mm from case Gultig wenn die Anschlussdrahte in 2 mm Abstand vom Gehause auf Umgebungstemperatur gehalten werden Tested with pulses tp = 300 s, duty cycle 2% - Gemessen mit Impulsen tp = 300 s, Schaltverhaltnis 2% (c) Diotec Semiconductor AG http://www.diotec.com/ 1 BC817 / BC818 Characteristics (Tj = 25C) Kennwerte (Tj = 25C) Min. Typ. Max. VBE - - 1.2 V ICB0 ICB0 - - - - 100 nA 5 A IEB0 - - 100 nA fT - 100 MHz - CCBO - 12 pF - Base-Emitter-voltage - Basis-Emitter-Spannung 2) VCE = 1 V, IC = 500 mA Collector-Base cutoff current - Kollektor-Basis-Reststrom VCB = 20 V, (E open) VCB = 20 V, Tj = 125C, (E open) Emitter-Base cutoff current - Emitter-Basis-Reststrom VEB = 4 V, (C open) Gain-Bandwidth Product - Transitfrequenz VCE = 5 V, IC = 10 mA, f = 50 MHz Collector-Base Capacitance - Kollektor-Basis-Kapazitat VCB = 10 V, IE =ie = 0, f = 1 MHz Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft < 420 K/W 1) RthA Recommended complementary PNP transistors Empfohlene komplementare PNP-Transistoren BC807 / BC808 Marking of available current gain groups per type Stempelung der lieferbaren Stromverstarkungsgruppen pro Typ BC817-16 = 6A or 6CR BC818-16 = 6E or 6CR BC817-25 = 6B or 6CS BC818-25 = 6F or 6CS BC817-40 = 6C or 6CT BC818-40 = 6G or 6CT 120 [%] 100 80 60 40 20 Ptot 0 0 TA 50 100 150 [C] 1 Power dissipation versus ambient temperature ) 1 Verlustleistung in Abh. von d. Umgebungstemp. ) 2 1 2 Tested with pulses tp = 300 s, duty cycle 2% - Gemessen mit Impulsen tp = 300 s, Schaltverhaltnis 2% Mounted on P.C. board with 3 mm2 copper pad at each terminal Montage auf Leiterplatte mit 3 mm2 Kupferbelag (Lotpad) an jedem Anschluss http://www.diotec.com/ (c) Diotec Semiconductor AG