CPC1217 Voltage-Controlled, Single-Pole, Normally Open, 4-Pin SIP OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Input Voltage to operate Rating 60 200 16 5-12 Units VP mArms / mADC V Features * Designed for use in Security Systems Complying with EN50130-4 * Voltage-Controlled Operation * 2500Vrms Input/Output Isolation * 100% Solid State * Matches Popular Reed Relay Pin-Out * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Immune to Radiated EM Fields * Small 4-Pin SIP Package * Auto Pick & Place, Wave Solderable Description The CPC1217 is a voltage-controlled, single-pole, normally open (1-Form-A), optically coupled solid state relay configuration in a 4-pin Single In-line Package (SIP). IXYS Integrated Circuits Division's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing a 2500Vrms input-to-output isolation barrier. Control of the isolated output is accomplished by means of a highly effective GaAlAs infrared LED at the input while the internal resistor in series with the LED enables the input's voltage-controlled operation. Because the input is solid state there is no need for snubbers or "catch" diodes to suppress the inductive flyback transient voltage normally associated with EMR coils. Approvals * UL 508 Approved Component: File E69938 * CSA Certified Component: Certificate 1172007 Applications * Security * Passive Infrared Detectors (PIR) * Data Signalling * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Energy Meters * Medical Equipment--Patient/Equipment Isolation * Aerospace * Industrial Controls Ordering Information Part # CPC1217Y Description 4-Pin SIP (8-Pin Body) (25/tube) Pin Configuration CPC1217 Pinout 1 2 + 3 - 4 Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb DS-CPC1217-R05 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION CPC1217 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Voltage Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 15 225 800 2500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V V mW mW Vrms C C Derate linearly 6.67 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous Peak On-Resistance 1 Off-State Leakage Current Switching Speeds Turn-On (Output Closed) Turn-Off (Output Open) Output Capacitance Input Characteristics Input Control Voltage Conditions Symbol Min Typ Max Units VIN=5V t10ms IL=200mA VL=60VP IL ILPK RON ILEAK - - 200 400 16 1 mArms / mAP mAP VIN=0V, VL=50V, f=1MHz ton toff COUT - 25 5 5 - - - 3.75 IL=200mA VIN VIN=-5V - IR - 5 1 900 1000 12 10 1100 A - - - 1 - pF VIN=5V, VL=10V Output Closed Recommended Operating Range Output Open Reverse Input Current Input Resistor Common Characteristics Capacitance, Input to Output 1 A ms pF V Measurement taken within 1 second of on-time. 2 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION CPC1217 PERFORMANCE DATA* Typical Turn-On Time (N=50, VIN=5V, IL=100mA, TA=25C) 25 15 10 5 35 Typical On-Resistance Distribution (N=50, VIN=5V, IL=100mA, TA=25C) 30 20 Device Count (N) 20 Device Count (N) Device Count (N) 25 Typical Turn-Off Time (N=50, VIN=5V, IL=100mA, TA=25C) 15 10 5 25 20 15 10 5 0 0 0.150 0.165 0.180 0.195 0.210 0.225 0.240 Turn-On (ms) Typical VIN for Switch Operation (N=50, IL=100mA, TA=25C) 0.46 Device Count (N) 20 15 10 5 0.52 0.55 0 0.58 7.00 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 1.17 1.19 1.21 1.23 1.25 35 15 10 5 1.13 1.15 1.17 1.19 1.21 1.23 1.45 Turn-On (ms) VIN (V) 1.35 1.30 1.25 1.20 1.15 -40 -20 0 VIN (V) Typical Turn-Off vs. VIN (IL=100mA) 0.51 60 20 40 Temperature (C) 80 100 Typical VIN for Switch Dropout vs. Temperature (IL=100mA) 1.45 0.50 0.47 0.46 Turn-Off (ms) Input Voltage (V) 0.48 1.35 1.30 1.25 1.20 0.45 1.15 0.44 0 2 4 6 8 10 12 VIN (V) 14 16 18 20 15 10 -40 -20 0 20 40 60 Temperature (C) 84 85 86 87 88 89 90 80 0.30 0.27 0.24 0.21 0.18 0.15 0.12 0.09 0.06 0.03 0 -40 Typical Turn-On vs. Temperature (IL=100mA) VIN = 5V -20 0 20 40 60 Temperature (C) 80 100 Typical Turn-Off vs. Temperature (IL=100mA) 1.40 0.49 20 Blocking Voltage (VP) 1.40 20 7.90 25 0 1.25 Typical VIN for Switch Operation vs. Temperature (IL=100mA) 15 7.75 5 Typical Turn-On vs. VIN (IL=100mA) 10 7.60 30 VIN (V) 5 7.45 Typical Blocking Voltage Distribution (N=50, TA=25C) VIN (V) 0 7.30 Typical VIN for Switch Dropout (N=50, IL=100mA, TA=25C) 20 1.27 7.15 On-Resistance (:) 0 1.15 Turn-Off (ms) 0.49 Turn-Off (ms) 25 0 Turn-On (ms) 0.43 Device Count (N) 25 Device Count (N) 0.40 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 VIN = 5V -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1217 PERFORMANCE DATA* Typical Load Current vs. Load Voltage (VIN=5V, TA=25C) 14 Load Current (mA) VIN = 5V 10 Steady State 8 6 4 2 -40 -20 0 20 40 60 80 100 Temperature (C) 200 225 150 200 100 50 0 -50 -100 92 0.014 Leakage (PA) Blocking Voltage (VP) 0.016 86 84 0.012 0.010 0.008 0.006 0.002 80 -40 -20 0 20 40 60 Temperature (C) 80 100 75 50 0 -40 -40 -20 0 20 40 60 Temperature (C) 80 -20 0 20 40 60 80 Temperature (C) 100 120 Energy Rating Curve 0.004 82 100 0 94 88 125 25 Typical Leakage vs. Temperature Measured Across Pins 1&4) (VL=Max Rated) VIN = 5V 150 -200 -2.00 -1.50 -1.00 -0.50 0 0.50 1.00 1.50 2.00 Load Voltage (V) Typical Blocking Voltage vs. Temperature 90 175 -150 Load Current (A) On-Resistance (:) 12 Typical Maximum Load Current vs. Temperature Load Current (mA) Typical On-Resistance vs. Temperature (IL=Max Rated @ Temperature) 100 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION CPC1217 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1217Y MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1217Y 245C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R05 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1217 MECHANICAL DIMENSIONS CPC1217Y 6.401 0.127 (0.252 0.005) 19.202 0.381 (0.756 0.015) PCB Hole Pattern 3.302 0.051 (0.130 0.002) 5.08 (0.200) 2.642 0.127 (0.104 0.005) 10.16 (0.400) 15.24 (0.600) 5.944 0.127 (0.234 0.005) 1.30 (0.051) Pin 1 0.457 0.076 (0.018 0.003) 5.080 0.127 (0.200 0.005) Pin 7 3.251 0.102 (0.128 0.004) 5.080 0.127 (0.200 0.005) 0.254 0.013 (0.010 0.0005) FINISHED HOLE 0.80 DIA x4 (0.031 DIA x4) DIMENSIONS mm (inches) For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1217-R05 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/14/2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: CPC1217 CPC1217Y CPC1217YA