MMBT3904 PZT3904 C C E E C B C TO-92 SOT-23 E B B SOT-223 Mark: 1A NPN General Purpose Amplifier This device is designed as a general purpose amplifier and switch. The useful dynamic range extends to 100 mA as a switch and to 100 MHz as an amplifier. Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Parameter Value Units VCEO Collector-Emitter Voltage 40 V VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 6.0 V IC Collector Current - Continuous 200 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD TA = 25C unless otherwise noted Characteristic RJC Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case RJA Thermal Resistance, Junction to Ambient Max Units 2N3904 625 5.0 83.3 *MMBT3904 350 2.8 **PZT3904 1,000 8.0 200 357 125 mW mW/C C/W C/W *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." **Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2. 2001 Fairchild Semiconductor Corporation 2N3904/MMBT3904/PZT3904, Rev A 2N3904 / MMBT3904 / PZT3904 2N3904 (continued) Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CEO IC = 1.0 mA, IB = 0 V(BR)CBO Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage 40 V V(BR)EBO Emitter-Base Breakdown Voltage IC = 10 A, IE = 0 60 V IE = 10 A, IC = 0 6.0 V IBL Base Cutoff Current VCE = 30 V, VEB = 3V 50 nA ICEX Collector Cutoff Current VCE = 30 V, VEB = 3V 50 nA ON CHARACTERISTICS* hFE DC Current Gain VCE(sat) Collector-Emitter Saturation Voltage VBE(sat) Base-Emitter Saturation Voltage IC = 0.1 mA, VCE = 1.0 V IC = 1.0 mA, VCE = 1.0 V IC = 10 mA, VCE = 1.0 V IC = 50 mA, VCE = 1.0 V IC = 100 mA, VCE = 1.0 V IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA 40 70 100 60 30 0.65 300 0.2 0.3 0.85 0.95 V V V V SMALL SIGNAL CHARACTERISTICS fT Current Gain - Bandwidth Product Cobo Output Capacitance Cibo Input Capacitance NF Noise Figure IC = 10 mA, VCE = 20 V, f = 100 MHz VCB = 5.0 V, IE = 0, f = 1.0 MHz VEB = 0.5 V, IC = 0, f = 1.0 MHz IC = 100 A, VCE = 5.0 V, RS =1.0k,f=10 Hz to 15.7kHz 300 MHz 4.0 pF 8.0 pF 5.0 dB SWITCHING CHARACTERISTICS td Delay Time VCC = 3.0 V, VBE = 0.5 V, 35 ns tr Rise Time IC = 10 mA, IB1 = 1.0 mA 35 ns ts Storage Time VCC = 3.0 V, IC = 10mA 200 ns tf Fall Time IB1 = IB2 = 1.0 mA 50 ns *Pulse Test: Pulse Width 300 s, Duty Cycle 2.0% Spice Model NPN (Is=6.734f Xti=3 Eg=1.11 Vaf=74.03 Bf=416.4 Ne=1.259 Ise=6.734 Ikf=66.78m Xtb=1.5 Br=.7371 Nc=2 Isc=0 Ikr=0 Rc=1 Cjc=3.638p Mjc=.3085 Vjc=.75 Fc=.5 Cje=4.493p Mje=.2593 Vje=.75 Tr=239.5n Tf=301.2p Itf=.4 Vtf=4 Xtf=2 Rb=10) 2N3904 / MMBT3904 / PZT3904 NPN General Purpose Amplifier (continued) V CE = 5V 400 125 C 300 25 C 200 - 40 C 100 0 0.1 1 10 I C - COLLECTOR CURRENT (mA) 100 Base-Emitter Saturation Voltage vs Collector Current 1 0.8 = 10 - 40 C 25 C 0.6 125 C 0.4 0.1 IC 1 10 - COLLECTOR CURRENT (mA) 100 VCESAT- COLLECTOR-EMITTER VOLTAGE (V) 500 VBE(ON)- BASE-EMITTER ON VOLTAGE (V) Typical Pulsed Current Gain vs Collector Current VBESAT- BASE-EMITTER VOLTAGE (V) h FE - TYP ICAL PULSED CURRE NT GAIN Typical Characteristics Collector-Emitter Saturation Voltage vs Collector Current 0.15 125 C 0.1 25 C 0.05 - 40 C 0.1 1 VCE = 5V 0.8 - 40 C 25 C 0.6 125 C 0.4 0.2 0.1 1 10 I C - COLLECTOR CURRENT (mA) 100 10 f = 1.0 MHz VCB = 30V CAPACITANCE (pF) ICBO- COLLECTOR CURRENT (nA) 100 Capacitance vs Reverse Bias Voltage 500 10 1 0.1 25 1 10 I C - COLLECTOR CURRENT (mA) Base-Emitter ON Voltage vs Collector Current Collector-Cutoff Current vs Ambient Temperature 100 = 10 50 75 100 125 TA - AMBIENT TEMPERATURE ( C) 150 5 4 3 C ibo 2 C obo 1 0.1 1 10 REVERSE BIAS VOLTAGE (V) 100 2N3904 / MMBT3904 / PZT3904 NPN General Purpose Amplifier (continued) Typical Characteristics (continued) Noise Figure vs Source Resistance Noise Figure vs Frequency 12 I C = 1.0 mA R S = 200 10 V CE = 5.0V I C = 1.0 mA NF - NOISE FIGURE (dB) NF - NOISE FIGURE (dB) 12 I C = 50 A R S = 1.0 k 8 I C = 0.5 mA R S = 200 6 4 2 I C = 100 A, R S = 500 0 0.1 1 10 f - FREQUENCY (kHz) 10 I C = 5.0 mA I C = 50 A 8 6 I C = 100 A 4 2 0 0.1 100 V CE = 40V I C = 10 mA 10 100 f - FREQUENCY (MHz) PD - POWER DISSIPATION (W) - CURRENT GAIN (dB) fe h 1 - DEGREES 0 20 40 60 80 100 120 140 160 180 h fe 1 1000 SOT-223 0.75 TO-92 0.5 SOT-23 0.25 0 0 Turn-On Time vs Collector Current I B1 = I B2 = Ic VCC = 40V 10 TIME (nS) 15V t r @ V CC = 3.0V 2.0V 10 1 10 I C - COLLECTOR CURRENT (mA) 125 150 100 I B1 = I B2 = Ic 10 T J = 25C T J = 125C 10 t d @ VCB = 0V 5 50 75 100 TEMPERATURE (o C) Rise Time vs Collector Current 40V 100 25 500 t r - RISE TIME (ns) 500 100 Power Dissipation vs Ambient Temperature Current Gain and Phase Angle vs Frequency 50 45 40 35 30 25 20 15 10 5 0 1 10 R S - SOURCE RESISTANCE ( k ) 100 5 1 10 I C - COLLECTOR CURRENT (mA) 100 2N3904 / MMBT3904 / PZT3904 NPN General Purpose Amplifier (continued) Typical Characteristics (continued) Storage Time vs Collector Current I B1 = I B2 = T J = 25C Fall Time vs Collector Current 500 Ic I B1 = I B2 = 10 t f - FALL TIME (ns) t S - STORAGE TIME (ns) 500 100 T J = 125C 10 5 T J = 125C 100 T J = 25C 1 10 I C - COLLECTOR CURRENT (mA) 5 100 1 10 I C - COLLECTOR CURRENT (mA) Current Gain h oe - OUTPUT ADMITTANCE ( mhos) V CE = 10 V f = 1.0 kHz T A = 25oC 100 10 0.1 1 I C - COLLECTOR CURRENT (mA) 1 1 I C - COLLECTOR CURRENT (mA) 10 V CE = 10 V f = 1.0 kHz T A = 25oC 10 1 0.1 1 I C - COLLECTOR CURRENT (mA) 10 Voltage Feedback Ratio ) _4 V CE = 10 V f = 1.0 kHz T A = 25oC 10 0.1 0.1 100 10 Input Impedance 100 100 Output Admittance h re - VOLTAGE FEEDBACK RATIO (x10 h fe - CURRENT GAIN VCC = 40V 10 500 h ie - INPUT IMPEDANCE (k ) Ic 10 10 7 V CE = 10 V f = 1.0 kHz T A = 25oC 5 4 3 2 1 0.1 1 I C - COLLECTOR CURRENT (mA) 10 2N3904 / MMBT3904 / PZT3904 NPN General Purpose Amplifier (continued) Test Circuits 3.0 V 275 300 ns 10.6 V Duty Cycle = 2% 10 K 0 C1 < 4.0 pF - 0.5 V < 1.0 ns FIGURE 1: Delay and Rise Time Equivalent Test Circuit 3.0 V 10 < t1 < 500 s t1 10.9 V 275 Duty Cycle = 2% 10 K 0 C1 < 4.0 pF 1N916 - 9.1 V < 1.0 ns FIGURE 2: Storage and Fall Time Equivalent Test Circuit 2N3904 / MMBT3904 / PZT3904 NPN General Purpose Amplifier TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G