BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L General Purpose Transistors NPN Silicon www.onsemi.com COLLECTOR 3 Features * S and NSV Prefixes for Automotive and Other Applications * Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant 1 BASE 2 EMITTER MAXIMUM RATINGS Rating 3 Symbol Value Unit Collector - Emitter Voltage VCEO 45 V Collector - Base Voltage VCBO 50 V Emitter - Base Voltage VEBO 5.0 V IC 500 mAdc SOT-23 CASE 318 STYLE 6 Symbol Max Unit MARKING DIAGRAM 225 1.8 mW mW/C 556 C/W Collector Current - Continuous 1 2 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR- 5 Board, (Note 1) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Total Device Dissipation Alumina Substrate, (Note 2) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature PD RqJA 1 PD 300 2.4 mW mW/C RqJA 417 C/W TJ, Tstg -65 to +150 C September, 2018 - Rev. 16 6x M G = Device Code x = A, B, or C = Date Code* = Pb-Free Package (Note: Microdot may be in either location) Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR-5 = 1.0 x 0.75 x 0.062 in. 2. Alumina = 0.4 x 0.3 x 0.024 in 99.5% alumina. (c) Semiconductor Components Industries, LLC, 1997 6x M G G 1 *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Publication Order Number: BC817-16LT1/D BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Min Typ Max Unit Collector -Emitter Breakdown Voltage (IC = 10 mA) V(BR)CEO 45 - - V Collector -Emitter Breakdown Voltage (VEB = 0, IC = 10 mA) V(BR)CES 50 - - V Emitter -Base Breakdown Voltage (IE = 1.0 mA) V(BR)EBO 5.0 - - V Collector Cutoff Current (VCB = 20 V) (VCB = 20 V, TA = 150C) ICBO - - - - 100 5.0 nA mA 100 160 250 40 - - - - 250 400 600 - Characteristic OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain (IC = 100 mA, VCE = 1.0 V) (IC = 500 mA, VCE = 1.0 V) hFE BC817-16, SBC817-16 BC817-25, SBC817-25 BC817-40, SBC817-40 - Collector -Emitter Saturation Voltage (IC = 500 mA, IB = 50 mA) VCE(sat) - - 0.7 V Base -Emitter On Voltage (IC = 500 mA, VCE = 1.0 V) VBE(on) - - 1.2 V fT 100 - - MHz Cobo - 10 - pF SMALL- SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 10 mA, VCE = 5.0 Vdc, f = 100 MHz) Output Capacitance (VCB = 10 V, f = 1.0 MHz) Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. ORDERING INFORMATION Device Specific Marking Package 6A SOT-23 (Pb-Free) BC817-16LT1G NSVBC817-16LT1G BC817-16LT3G BC817-25LT1G BC817-25LT3G 3000 / Tape & Reel SOT-23 (Pb-Free) 6B 10,000 / Tape & Reel SBC817-25LT3G BC817-40LT1G SBC817-40LT1G BC817-40LT3G 3000 / Tape & Reel 10,000 / Tape & Reel SBC817-16LT3G SBC817-25LT1G Shipping 3000 / Tape & Reel SOT-23 (Pb-Free) 6C 10,000 / Tape & Reel SBC817-40LT3G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 2 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L TYPICAL CHARACTERISTICS - BC817-16L, SBC817-16L 300 1 hFE, DC CURRENT GAIN 200 25C -55C 100 0 VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) VCE = 1 V 150C 0.001 0.01 0.01 0.1 1 Figure 1. DC Current Gain vs. Collector Current Figure 2. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) 0.001 IC, COLLECTOR CURRENT (A) -55C IC/IB = 10 0.9 25C 0.8 150C 0.7 0.6 0.5 0.4 0.3 0.2 -55C 0.1 IC, COLLECTOR CURRENT (A) 1.1 1.0 150C 25C 0.01 1 0.1 IC/IB = 10 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 -55C 0.9 0.8 25C 0.7 0.6 150C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 3. Base Emitter Saturation Voltage vs. Collector Current Figure 4. Base Emitter Voltage vs. Collector Current www.onsemi.com 3 1 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L V, TEMPERATURE COEFFICIENTS (mV/C) 1.0 TJ = 25C 0.8 0.6 0.4 IC = 10 mA 100 mA 300 mA 500 mA 0.2 0 0.01 0.1 1 IB, BASE CURRENT (mA) 10 +1 qVC for VCE(sat) 0 -1 qVB for VBE -2 100 1 Figure 5. Saturation Region 10 100 IC, COLLECTOR CURRENT (mA) Figure 6. Temperature Coefficients 100 C, CAPACITANCE (pF) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS - BC817-16L, SBC817-16L Cib 10 Cob 1 0.1 10 1 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitances www.onsemi.com 4 100 1000 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L TYPICAL CHARACTERISTICS - BC817-25L, SBC817-25L 500 1 hFE, DC CURRENT GAIN 150C VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) VCE = 1 V 400 300 25C 200 -55C 100 0 0.001 0.01 0.001 0.01 0.1 1 Figure 8. DC Current Gain vs. Collector Current Figure 9. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) -55C IC/IB = 10 25C 0.8 150C 0.7 0.6 0.5 0.4 0.3 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 0.9 -55C 0.8 25C 0.7 0.6 0.5 150C 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 10. Base Emitter Saturation Voltage vs. Collector Current Figure 11. Base Emitter Voltage vs. Collector Current 1000 fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) -55C IC, COLLECTOR CURRENT (A) 0.9 0.2 0.1 IC, COLLECTOR CURRENT (A) 1.1 1.0 150C 25C 0.01 1 0.1 IC/IB = 10 VCE = 1 V TA = 25C 100 10 0.1 1 10 100 IC, COLLECTOR CURRENT (mA) Figure 12. Current Gain Bandwidth Product vs. Collector Current www.onsemi.com 5 1000 1 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L V, TEMPERATURE COEFFICIENTS (mV/C) 1.0 TJ = 25C 0.8 0.6 0.4 IC = 10 mA 100 mA 300 mA 500 mA 0.2 0 0.01 0.1 1 IB, BASE CURRENT (mA) 10 +1 qVC for VCE(sat) 0 -1 qVB for VBE -2 100 1 Figure 13. Saturation Region 10 100 IC, COLLECTOR CURRENT (mA) Figure 14. Temperature Coefficients 100 C, CAPACITANCE (pF) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS - BC817-25L, SBC81725L Cib 10 Cob 1 0.1 10 1 VR, REVERSE VOLTAGE (VOLTS) Figure 15. Capacitances www.onsemi.com 6 100 1000 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L TYPICAL CHARACTERISTICS - BC817-40L, SBC817-40L 1 700 150C VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN 600 VCE = 1 V 500 25C 400 300 -55C 200 100 0 0.001 0.01 0.001 0.01 0.1 1 Figure 16. DC Current Gain vs. Collector Current Figure 17. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) -55C IC/IB = 10 0.8 25C 0.7 0.6 150C 0.5 0.4 0.3 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 0.9 -55C 0.8 25C 0.7 0.6 0.5 150C 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 18. Base Emitter Saturation Voltage vs. Collector Current Figure 19. Base Emitter Voltage vs. Collector Current 1000 fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) 0.01 IC, COLLECTOR CURRENT (A) 0.9 0.2 -55C IC, COLLECTOR CURRENT (A) 1.1 1.0 150C 25C 0.1 0.001 1 0.1 IC/IB = 10 VCE = 1 V TA = 25C 100 10 0.1 1 10 100 IC, COLLECTOR CURRENT (mA) Figure 20. Current Gain Bandwidth Product vs. Collector Current www.onsemi.com 7 1000 1 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L V, TEMPERATURE COEFFICIENTS (mV/C) 1.0 TJ = 25C 0.8 0.6 0.4 IC = 10 mA 100 mA 300 mA 500 mA 0.2 0 0.01 0.1 1 IB, BASE CURRENT (mA) 10 +1 qVC for VCE(sat) 0 -1 qVB for VBE -2 100 1 Figure 21. Saturation Region 10 100 IC, COLLECTOR CURRENT (mA) Figure 22. Temperature Coefficients 100 C, CAPACITANCE (pF) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS - BC817-40L, SBC817-40L Cib 10 Cob 1 0.1 10 1 VR, REVERSE VOLTAGE (VOLTS) Figure 23. Capacitances www.onsemi.com 8 100 1000 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L TYPICAL CHARACTERISTICS - BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L 1 1 ms 10 ms 100 ms 1s Thermal Limit IC (A) 0.1 0.01 Single Pulse Test @ TA = 25C 0.001 0.01 0.1 1 VCE (Vdc) 10 Figure 24. Safe Operating Area www.onsemi.com 9 100 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AS D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 0.25 3 E 1 2 T HE DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 --- 10 MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0 INCHES NOM 0.039 0.002 0.017 0.006 0.114 0.051 0.075 0.017 0.021 0.094 --- MAX 0.044 0.004 0.020 0.008 0.120 0.055 0.080 0.022 0.027 0.104 10 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 www.onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BC817-16LT1/D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: BC817-16LT1G BC817-16LT3G BC817-25LT1G BC817-25LT3G BC817-40LT1G BC817-40LT3G SBC81725LT1G SBC817-25LT3G SBC817-16LT3G SBC817-40LT1G SBC817-40LT3G NSVBC817-16LT1G