DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D088 PLVA2600A series Low-voltage avalanche regulator double diodes Product specification Supersedes data of 1999 May 10 2001 Oct 15 Philips Semiconductors Product specification Low-voltage avalanche regulator double diodes FEATURES PLVA2600A series MARKING * Very low dynamic impedance at low currents: approximately 120 of conventional series MARKING CODE(1) TYPE NUMBER PLVA2650A 9J * Hard breakdown knee PLVA2653A 9K * Low noise: approximately 110 of conventional series PLVA2656A 9L PLVA2659A 9M * Total power dissipation: max. 250 mW PLVA2662A 9N PLVA2665A 9O * Small tolerances of VZ PLVA2668A 9P * Working voltage range: nom. 5.0 to 6.8 V * Non-repetitive peak reverse power dissipation: max. 30 W. APPLICATIONS * Low current, low power, low noise applications Note 1. = p : Made in Hong Kong. = t : Made in Malaysia. = W: Made in China. PINNING PIN DESCRIPTION 1 cathode (k1) * CMOS RAM back-up circuits 2 cathode (k2) * Voltage stabilizers 3 common anode * Voltage limiters * Smoke detector relays. 2 1 DESCRIPTION The PLVA2600A series consists of two high performance voltage regulator diodes with common anodes, in small SOT23 plastic SMD packages. The series consists of PLVA2650A to PLVA2668A. 2 1 3 3 Top view MAM245 Fig.1 Simplified outline (SOT23) and symbol. 2001 Oct 15 2 Philips Semiconductors Product specification Low-voltage avalanche regulator double diodes PLVA2600A series LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT - 250 mA tp = 100 s; = 10% - 250 mA non-repetitive peak reverse power dissipation tp = 100 s; Tj = 150 C - 30 W total power dissipation single diode loaded; Tamb = 25 C; note 1 - 250 mW double diode loaded; Tamb = 25 C; note 1 - 180 mW IF continuous forward current IZRM repetitive peak working current PZSM Ptot Tstg storage temperature -65 +150 C Tj junction temperature - 150 C Note 1. Device mounted on an FR4 printed circuit-board. 2001 Oct 15 3 Philips Semiconductors Product specification Low-voltage avalanche regulator double diodes PLVA2600A series ELECTRICAL CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL PARAMETER CONDITIONS V PLVA2650A 4.80 5.00 5.20 V PLVA2653A 5.10 5.30 5.50 V PLVA2656A 5.40 5.60 5.80 V PLVA2659A 5.70 5.90 6.10 V PLVA2662A 6.00 6.20 6.40 V PLVA2665A 6.30 6.50 6.70 V PLVA2668A 6.60 6.80 7.00 V PLVA2650A - 4.30 - V PLVA2653A - 5.20 - V PLVA2656A - 5.51 - V PLVA2659A - 5.85 - V PLVA2662A - 6.19 - V PLVA2665A - 6.49 - V - 6.80 - V - - 700 PLVA2653A - - 250 PLVA2656A to PLVA2668A - - 100 PLVA2650A - 0.20 - mV/K PLVA2653A - 1.60 - mV/K PLVA2656A - 1.90 - mV/K PLVA2659A - 2.40 - mV/K PLVA2662A - 2.65 - mV/K PLVA2665A - 2.90 - mV/K PLVA2668A - 3.40 - mV/K PLVA2650A - - 20000 nA PLVA2653A - - 5000 nA IZ = 250 A working voltage IZ = 10 A PLVA2668A dynamic resistance PLVA2650A 2001 Oct 15 UNIT 0.9 IF = 10 mA working voltage IR MAX. - forward voltage SZ TYP. - VF VZ RZ MIN. temperature coefficient reverse current 1 kHz superimposed; IZAC is 10% of IZDC; IZ = 250 A IZ = 250 A VR = 80%; VZ nominal PLVA2656A - - 1000 nA PLVA2659A - - 500 nA PLVA2662A - - 100 nA PLVA2665A - - 50 nA PLVA2668A - - 10 nA 4 Philips Semiconductors Product specification Low-voltage avalanche regulator double diodes SYMBOL IR PARAMETER reverse current Vn CONDITIONS MIN. TYP. MAX. UNIT VR = 50%; VZ nominal PLVA2650A - 34 - nA PLVA2653A - 22 - nA PLVA2656A - 1.1 - nA PLVA2659A - 0.9 - nA PLVA2662A - 0.9 - nA PLVA2665A - 0.9 - nA PLVA2668A - 0.8 - nA PLVA2650A - 21 - A PLVA2653A - 3.5 - A reverse current VZ PLVA2600A series VR = 90%; VZ nominal PLVA2656A - 1.3 - A PLVA2659A - 1.0 - A PLVA2662A - 0.05 - A PLVA2665A - 0.04 - A PLVA2668A - 0.006 - A PLVA2659A to PLVA2668A ILO = 10 A; IHi = 1 mA - - 0.1 V PLVA2656A ILO = 50 A; IHi = 1 mA - - 0.1 V PLVA2650A ILO = 100 A; IHi = 1 mA - - 0.4 V PLVA2653A ILO = 100 A; IHi = 1 mA - - 0.2 V f = 1 kHz; B = 1 kHz; IZ = 250 A - - 1.0 V -----------Hz line regulation noise voltage density THERMAL CHARACTERISTICS SYMBOL PARAMETER Rth j-tp thermal resistance from junction to tie-point Rth j-a thermal resistance from junction to ambient CONDITIONS note 1 Note 1. Device mounted on an FR4 printed circuit-board. 2001 Oct 15 5 VALUE UNIT 360 K/W 500 K/W Philips Semiconductors Product specification Low-voltage avalanche regulator double diodes PLVA2600A series PACKAGE OUTLINE Plastic surface mounted package; 3 leads SOT23 D E B A X HE v M A 3 Q A A1 1 2 e1 bp c w M B Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max. bp c D E e e1 HE Lp Q v w mm 1.1 0.9 0.1 0.48 0.38 0.15 0.09 3.0 2.8 1.4 1.2 1.9 0.95 2.5 2.1 0.45 0.15 0.55 0.45 0.2 0.1 OUTLINE VERSION SOT23 2001 Oct 15 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 97-02-28 99-09-13 TO-236AB 6 Philips Semiconductors Product specification Low-voltage avalanche regulator double diodes PLVA2600A series DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2001 Oct 15 7 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA73 (c) Koninklijke Philips Electronics N.V. 2001 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/04/pp8 Date of release: 2001 Oct 15 Document order number: 9397 750 08768