B0.38 H A0.25 1.27 1.27 G O0.65 Specifications Recommended PCB Layout 1.27 3.40 0.40 Sq. Pin Electrical Current Rating: 1A per pin Contact Resistance: 20 m max. Insulating Resistance: 1000 M min. Dielectric Withstand Voltage: 300V AC D0.2 H OL (See Table) E Plating See Ordering Grid C0.2 F Material Insulator Material: Polymer,LCP, UL 94V-0 Contact Terminal: Copper Alloy D Soldering Process: IR Reflow: 260C for 10 sec. Wave: 250C for 5-10 sec Manual Solder: 350C for 3-5 sec 1.27 Mechanical & Environmental Operating Temperature: -40C to +105C Ordering Grid C B BD030 XX X X XXXX XXXX L X Packing Options G = Plastic Box (Standard) D = Tube E = Tube with Cap Insulator Material L = LCP Dimension D (1/100mm) (Tail Length) 0300 = 3.00mm (Standard) No. of Contacts 04 to 66 Contact Plating A = Gold Flash All Over (Standard) B = Selective Gold Flash Contact Area/Tin On Tail C = Tin All Over G = 10" Gold Contact Area/Tin On Tail I = 30" Gold Contact Area/Tin On Tail Insulator Height 'H' A = 1.5mm (Standard) K = 1.0mm G = 1.7mm B = 2.0mm L = 2.5mm F = 3.0mm A Request Samples and Quotation Dimension C (1/100mm) (Post Height) 0200 = 2.00mm (Standard) 0350 = 3.50mm (Standard) or specify Custom Tail Length e.g. 0250 = 2.50mm (Minimum 0050 = 0.50mm) (Maximum - see Table) or specify Custom Post Height e.g. 0250 = 2.50mm (Minimum 0050 = 0.50mm) (Maximum - see Table) Mates with (Subject to pin length) BD050 BD055 BD060 BD064 BD065 BD091 BD092 BD093 Insulator Height H A=1.5mm K=1.0mm G=1.7mm B=2.0mm L=2.5mm F=3.0mm 2 3 12.00 10.00 12.00 15.00 15.00 15.00 8.00 6.00 8.00 10.00 10.00 10.00 Part Number Product Description BD030 1.27mm Pitch Pin Header, Dual Row, Through Hole, Vertical Drawing Date 21st December 2007 By Detail 1 Maximum Table OL Max (mm) Dim C&D Max (mm) 4 Revision Date 5 CC Tolerances (Except as Noted) BD030 G PCN G3 07/09/17 X. 5 X. 0.30 X.X 2 X.X 0.20 X.XX 0.15 X.XX 1 X.XXX 0.10 X.XXX 0.5 Length Angle 6 Units: Metric (mm) C 3rd Angle Projection 7 Dimensions No. of Contacts A B 4 1.27 2.54 6 2.54 3.81 8 3.81 5.08 10 5.08 6.35 12 6.35 7.62 14 7.62 8.89 16 8.89 10.16 18 10.16 11.43 20 11.43 12.70 22 12.70 13.97 24 13.97 15.24 26 15.24 16.51 28 16.51 17.78 30 17.78 19.05 32 19.05 20.32 34 20.32 21.59 36 21.59 22.86 38 22.86 24.13 40 24.13 25.40 42 25.40 26.67 44 26.67 27.94 46 27.94 29.21 48 29.21 30.48 50 30.48 31.75 52 31.75 33.02 54 33.02 34.29 56 34.29 35.56 58 35.56 36.83 60 36.83 38.10 62 38.10 39.37 64 39.37 40.64 66 40.64 41.91 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE www.gct.co Not to Scale Drawn By VJ 8 Sheet No. 1/1