Absolute Maximum Ratings * Tolerance = 5% TA = 25C unless otherwise noted Symbol PD Parameter Power Dissipation @ TL 75C, Lead Length = 3/8" TJ, TSTG Operating and Storage Temperature Range Value 500 Units mW 4.0 mW/C -65 to +200 C Derate above 75C * These ratings are limiting values above which the serviceability of the diode may be impaired. DO-35 Glass case COLOR BAND DENOTES CATHODE Electrical Characteristics Device TA=25C unless otherwise noted IZM (mA) (Note 2) VZ (Volts) (Note 3) 120 110 100 95 90 0.7 0.7 0.75 0.8 0.85 1 1.5 2 2 2 85 80 75 70 65 0.9 0.95 0.95 0.97 0.99 10 10 10 10 10 3 3 4 5 5.1 60 55 50 45 35 0.99 0.97 0.96 0.95 0.9 7.785 8.61 9.135 9.555 10.5 10 1 1 1 1 5.7 6.2 6.6 6.9 7.6 31.8 29 27.4 26.2 24.8 0.75 0.5 0.1 0.08 0.1 11.55 12.6 13.65 14.7 15.75 0.05 0.05 0.05 0.05 0.05 8.4 9.1 9.8 10.6 11.4 21.6 20.4 19 17.5 16.3 0.11 0.12 0.13 0.14 0.15 VZ (V) @ IZ = 50A (Note 1) IR @ VR 1N4678 1N4679 1N4680 1N4681 1N4682 Min. 1.71 1.9 2.09 2.28 2.565 Typ. 1.8 2 2.2 2.4 2.7 Max. 1.89 2.1 2.31 2.52 2.835 A 7.5 5 4 2 1 V 1 1 1 1 1 1N4683 1N4684 1N4685 1N4686 1N4687 2.85 3.135 3.42 3.705 4.085 3 3.3 3.6 3.9 4.3 3.15 4.465 3.78 4.095 4.515 0.8 7.5 7.5 5 4 1N4688 1N4689 1N4690 1N4691 1N4692 4.465 4.845 5.32 5.89 6.45 4.7 5.1 5.6 6.2 6.8 4.935 5.355 5.88 6.51 7.14 1N4693 1N4694 1N4695 1N4696 1N4697 7.125 7.79 8.265 8.645 9.5 7.5 8.2 8.7 9.1 10 1N4698 1N4699 1N4700 1N4701 1N4702 10.45 11.4 12.35 13.3 14.25 11 12 13 14 15 VF Forward Voltage = 1.5V Max @ IF = 100mA Notes: 1. Zener Voltage (VZ) The zener voltage is measured with the device junction in the thermal equilibrium at the lead temperature (TL) at 30C 1C and 3/8" lead length. 2. Maximum Zener Current Ratings (IZM) The maximum current handling capability on a worst case basis is limited by the actual zener voltage at the operation point and the power derating curve. 3. Maximum Voltage Change (VZ) Voltage change is equal to the difference between VZ at 100A and at 10A. (c)2004 Fairchild Semiconductor Corporation 1N4678 - 1N4702, Rev. C2 Zeners 1N4678 - 1N4702 Zeners 1N4678 - 1N4702 Device 1N4678 1N4679 1N4680 1N4681 1N4682 Line 1 LOGO LOGO LOGO LOGO LOGO Line 2 467 467 468 468 468 Line 3 8 9 0 1 2 Line 4 XY XY XY XY XY 1N4683 1N4684 1N4685 1N4686 1N4687 LOGO LOGO LOGO LOGO LOGO 468 468 468 468 468 3 4 5 6 7 XY XY XY XY XY 1N4688 1N4689 1N4690 1N4691 1N4692 LOGO LOGO LOGO LOGO LOGO 468 468 469 469 469 8 9 0 1 2 XY XY XY XY XY 1N4693 1N4694 1N4695 1N4696 1N4697 LOGO LOGO LOGO LOGO LOGO 469 469 469 469 469 3 4 5 6 7 XY XY XY XY XY 1N4698 1N4699 1N4700 1N4701 1N4702 LOGO LOGO LOGO LOGO LOGO 469 469 470 470 470 8 9 0 1 2 XY XY XY XY XY (c)2004 Fairchild Semiconductor Corporation 1N4678 - 1N4702, Rev. C2 Zeners 1N4678 - 1N4702 Top Mark Information F 522 9B XY 1st line: F - Fairchild Logo 2nd line: Device Name - 3rd to 5th characters of the device name. or 4th to 6th characters for BZXyy series 3rd line: Device Name - 6th to 7th characters of the device name. or Voltage rating for BZXyy series 4th line: Device Code or - Two Digit - Six Weeks Date Code. Date code plus or Two Digit - Six Weeks Date Code Large die identification plus Large die identification, "L" General Requirements: 1.0 Cathod Band 2.0 First Line: F - Fairchild Logo 3.0 Second Line: Device name - For 1Nxx series: 3rd to 5th characters of the device name. For BZxx series: 4th to 6th characters of the device name. 4.0 Third Line: Device name - For 1Nxx series: 6th to 7th characters of the device name. For BZXyy series: Voltage rating 5.0 Fourth Line: XY or XYL - Two Digit - Six Weeks Date Code Where: X represents the last digit of the calendar year Y represents the Six weeks numeric code L represents the Large die identification 6.0 Devices shall be marked as required in the device specification (PID or FSC Test Spec). 7.0 Maximum no. of marking lines: 4 8.0 Maximum no. of digits per line: 3 9.0 FSC logo must be 20 % taller than the alphanumeric marking and should occupy the 2 characters of the specified line. 10.0 Marking Font: Arial (Except FSC Logo) 11.0 First character of each marking line must be aligned vertically (c)2004 Fairchild Semiconductor Corporation 1N4678 - 1N4702, Rev. C2 Zeners 1N4678 - 1N4702 Top Mark Information (Continued) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FACT Quiet SeriesTM ActiveArrayTM FAST BottomlessTM FASTrTM CoolFETTM FPSTM CROSSVOLTTM FRFETTM DOMETM GlobalOptoisolatorTM EcoSPARKTM GTOTM E2CMOSTM HiSeCTM EnSignaTM I2CTM FACTTM i-LoTM Across the board. Around the world.TM The Power Franchise Programmable Active DroopTM ImpliedDisconnectTM PACMANTM POPTM ISOPLANARTM Power247TM LittleFETTM MICROCOUPLERTM PowerSaverTM PowerTrench MicroFETTM QFET MicroPakTM QSTM MICROWIRETM QT OptoelectronicsTM MSXTM Quiet SeriesTM MSXProTM RapidConfigureTM OCXTM RapidConnectTM OCXProTM SILENT SWITCHER OPTOLOGIC SMART STARTTM OPTOPLANARTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic TINYOPTOTM TruTranslationTM UHCTM UltraFET VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I10