VUC 36 IdAVM = 39 A 31 A ITAVM = VRRM = 1200/1600 V Three Phase Rectifier Bridge with Fast Diodes and "Softstart" Thyristor VRSM VRRM V V 1300 1700 1200 1600 Type VUC 36-12go2 VUC 36-16go2 Conditions IdAV IdAVM ITAVM TK = 85C, module module TK = 85C, DC IFSM, ITSM TVJ = 45C VR = 0 (di/dt)cr (dv/dt)cr 4 1 6 7 3 5 8 Maximum Ratings Diode Thyristor 34 39 - 31 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 300 330 400 440 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 270 300 360 400 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 450 460 800 810 A2 s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 365 380 650 670 A2 s A2 s 150 A/s 500 A/s 200 V/s 10 V 10 1 0.5 W W W -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ 2-2.5 18-22 Nm lb.in. 28 g TVJ = TVJM repetitive, IT = 50 A f = 400 Hz, tP = 200 s VD = 2/3 VDRM IG = 0.3 A non repetitive, IT = ITAVM diG /dt = 0.3 A/s TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) VRGM PGM 1 TVJ = TVJM IT = ITAVM tp = 30 s tp = 10 ms < < PGAVM TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL < 1 mA t = 1 min t=1s Md Mounting torque (M5) (10-32 UNF) Weight typ. 4 3 2 5 Symbol I2t 2 6 7 8 Features * Package with DCB ceramic base plate * Isolation voltage 3600 V~ * Planar passivated chips * Fast recovery diodes to reduce EMI * Separate thyristor for softstart * Solderable terminals * UL registered E 72873 Applications * Input rectifier for switching power supplies (SMPS) * Softstart capacitor charging * Electric drives and auxiliaries Advantages * Easy to mount with two screws * Space and weight savings * Improved temperature & power cycling * Up to 10 dB lower EMI/RFI compared to standard rectifier Dimensions in mm (1 mm = 0.0394") Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated IXYS reserves the right to change limits, test conditions and dimensions. (c) 2010 IXYS All rights reserved 20100709b 1-2 VUC VUC36 36 Symbol Conditions IR, ID VR = VRRM; VD = VDRM TVJ = TVJM TVJ = 25C < 5 < 0.3 < < 5 0.3 mA mA VF, VT IF = 55 A; IT = 45 A TVJ = 25C <1.85 < 1.4 V VT0 rT For power-loss calculations only TVJ = 125C VGT IGT VD = 6 V VD = 6 V TVJ = 25C TVJ = 25C < < 1.5 80 V mA VGD IGD VD = 2/3 VDRM VD = 2/3 VDRM TVJ = TVJM TVJ = TVJM < < 0.2 5 V mA IL tG = 30 s; IG = 0.3 A diG/dt = 0.3 A/s TVJ = 25C < 300 mA IH VD = 6 V; RGK = TVJ = 25C < 100 mA tgd VD = 1/2VDRM; IG = 0.3 A diG/dt = 0.3 A/s TVJ = 25C < 2.5 s tq IT = 15 A; tp = 300 s; -di/dt = 10 A/s; TVJ = 125C VR = 100 V; dv/dt = 20 V/s; VD = 2/3 VDRM typ. 130 s t rr IF = 10 A; VR = 1/2VRRM -di/dt = 10 A/s < 1.5 - s RthJC per per per per 1.4 0.233 2.0 0.333 0.9 1.1 - K/W K/W K/W K/W RthJH dS dA a Characteristic Values Diode Thyristor TVJ = 25C thyristor (diode); DC current module thyristor (diode); DC current module Creeping distance on surface Creepage distance in air Max. allowable acceleration IXYS reserves the right to change limits, test conditions and dimensions. (c) 2010 IXYS All rights reserved 1.2 16 0.85 V 10 m 7 mm 7 mm 50 m/s2 20100709b 2-2