DIODE MODULE Spec.No.SR2-SP-09006 R0 MDM1200H45E2 P1/2 TARGET Specification OUTLINE DRAWING FEATURES Low VF diode module. Low noise recovery: Ultra soft fast recovery diode. High reverse recovery capability: Super HiRC Structure. High reliability, high durability diodes. Isolated heat sink (terminal to base). Unit in mm CIRCUIT DIAGRAM C(K) C(K) E(A) E(A) Weight: 1050(g) ABSOLUTE MAXIMUM RATINGS (TC=25 ) Item Symbol Unit Repetitive Peak Reverse Voltage AC peak Forward Current 1ms Junction Temperature Storage Temperature Terminals-base Isolation Test Voltage Terminal 1-Terminal 2 Screw Torque Terminals (M8) Mounting (M6) VRRM IMFpeak IFpulse Tj Tstg VISO VISO T-T - V MDM1200H45E2 4,500 1,200 2,400 -40 +125 -40 +125 (1) 8,400 (AC 1 minute) 8,400 (AC 1 minute) 10 (2) 6 (3) A VRMS N*m Notes: (1) Terminal temperature shall not exceed the specified temperature in any operation. (2) Recommended Value 91N*m (3) Recommended Value 5.50.5N*m IMFpeak=1200A IMF(RMS)<450A ELECTRICAL CHARECTERISTICS Item Symbol Unit Repetitive Reverse Current Forward Voltage Drop Reverse Recovery Time Reverse Recovery Loss IRRM VF trr Err(10%) mA V s J/P PACKAGE CHARECTERISTICS Item Symbol Unit Min. Typ. Max. TBD - 2.0 3.4 TBD 3.4 TBD 3.9 TBD TBD Test Conditions Min. Typ. Max. Terminal Resistance Terminal Stray Inductance Thermal Impedance Comparative tracking index RCE LsCE Rth(j-c) CTI m nH K/W - Contact Thermal Impedance Rth(c-f) K/W - VAK=4,500V, Tj=125 IF=1,200A, Tj=125 VCC=2,600V, IF=1,200A, Ls=150nH o Tj=125 C Rg=3.3 (4) Test Conditions 0.3 60 600 par arm par arm 0.017 Junction to case (par arm) Case to fin (par module) 0.007 grease=1W/(m K) Notes:(4) Counter arm; MBN1200H45E2 VGE=+/-15V RG value is the test condition's value for evaluation of the switching times, not recommended value. Please, determine the suitable RG value after the measurement of switching waveforms (overshoot voltage, etc.) with appliance mounted. * Please contact our representatives at order. * For improvement, specifications are subject to change without notice. * For actual application, please confirm this spec sheet is the newest revision. http://store.iiic.cc/ DIODE MODULE Spec.No.SR2-SP-09006 R0 MDM1200H45E2 P2/2 TARGET Specification HITACHI POWER SEMICONDUCTORS Notices 1. The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact Hitachi sales department for the latest version of this data sheets. 2. Please be sure to read "Precautions for Safe Use and Notices" in the individual brochure before use. 3. In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, life-support-related medical equipment, fuel control equipment and various kinds of safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement. Or consult Hitachi's sales department staff. 4. In no event shall Hitachi be liable for any damages that may result from an accident or any other cause during operation of the user's units according to this data sheets. Hitachi assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in this data sheets. 5. In no event shall Hitachi be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 6. No license is granted by this data sheets under any patents or other rights of any third party or Hitachi, Ltd. 7. This data sheets may not be reproduced or duplicated, in any form, in whole or in part, without the expressed written permission of Hitachi, Ltd. 8. The products (technologies) described in this data sheets are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety not are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. For inquiries relating to the products, please contact nearest overseas representatives that is located "Inquiry" portion on the top page of a home page. Hitachi power semiconductor home page address http://www.hitachi.co.jp/products/power/pse/ http://store.iiic.cc/