RL101G THRU RL107G MINIATURE GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 utilizing Flame Retardant Epoxy Molding Compound Glass passivated junction version of RL101G thru RL107G in A-405 package 1.0 ampere operation at TA=75 with no thermal runaway Mechanical Data DIM ENSIONS Case: Molded plastic, A-405 Terminals: Axial leads, solderable per MIL-STD-202, method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.008 ounce, 0.235 gram DIM inches mm Note Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.020 0.024 0.5 0.6 D 1.000 - 25.40 - RL 103G RL 104G RL 105G RL 106G RL 107G Units Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. Symbols RL 101G RL 102G Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75 I(AV) 1.0 Amp Peak forward surge current, IFM (surge): 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 30.0 Amps Maximum forward voltage at 1.0A VF 1.1 Volts IR 5.0 100.0 A CJ 15.0 F 50.0 /W Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating and storage temperature range R JA TJ, TSTG -55 to +150 Notes: (1) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC (2) Thermal resistance junction to ambient 1 RATINGS AND CHARACTERISTIC CURVES 2