LITE-ON DCC
RELEASE
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
Through Hole Lamp
Product Data Sheet
LTL-4221N-002
Spec No.: DS-20-95-0069
Effective Date: 03/25/2000
Revision: -
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
L I T E - O N E L E C T R O N I C S , I N C .
P roper t y o f Li t e -O n On l y
Features
* High Intensity.
* Popular T-1 diameter package.
* Selected minimum intensities.
* General purpose leads.
* Reliable and rugged.
Package Dimensions
Part No.
Lens
Source Color
LTL-4221N-002
Red Diffused
Hi-Eff.Red
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25mm(.010") unless otherwise noted.
3. Protruded resin under flange is 1.0mm(.04") max.
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice.
Part No. : LTL-4221N-002
Page : 1 of 5
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
P ro p er t y o f Li t e -O n On l y
Absolute Maximum Ratings at TA=25℃
Parameter
Maximum Rating
Unit
Power Dissipation
100
mW
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
120
mA
Continuous Forward Current
30
mA
Derating Linear From 50℃
0.4
mA/℃
Reverse Voltage
5
V
Operating Temperature Range
-55℃ to + 100℃
Storage Temperature Range
-55℃ to + 100℃
Lead Soldering Temperature
[1.6mm(.063") From Body]
260℃ for 5 Seconds
Part No. : LTL-4221N-002
Page : 2 of 5
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
P ro p er t y o f Li t e -O n On l y
Electrical / Optical Characteristics at TA=25℃
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
IV
2.5
8.7
mcd
IF = 10mA
Note 1,4
Viewing Angle
2θ1/2
60
deg
Note 2 (Fig.6)
Peak Emission Wavelength
λP
635
nm
Measurement
@Peak (Fig.1)
Dominant Wavelength
λd
623
nm
Note 3
Spectral Line Half-Width
Δλ
40
nm
Forward Voltage
VF
2.0
2.6
V
IF = 20mA
Reverse Current
IR
100
μA
VR = 5V
Capacitance
C
20
pF
VF = 0 , f = 1MHz
Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
(Commission International De L'Eclairage) eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
4. The Iv guarantee should be added ±15% .
Part No. : LTL-4221N-002
Page : 3 of 5
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
P ro p er t y o f Li t e -O n On l y
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Part No. : LTL-4221N-002
Page : 4 of 5
BNS-OD-C131/A4
L I T E - O N E L E C T R O N I C S , I N C .
P ro p er t y o f Li t e -O n On l y
Features
* Compatible with radial lead automatic insertion equipment.
* Most radial lead plastic lead lamps available packaged in tape and reel.
* 5mm (0.197") formed lead and 2.54mm (0.1") straight lead spacing available.
* Reel packaging simplifies handling and testing.
Package Dimensions
Specification
Item
Symbol
Minimum
Maximum
mm
inch
mm
inch
Tape Feed Hole Diameter
D
3.8
0.149
4.2
0.165
Component Lead Pitch
F
2.3
0.091
3.0
0.118
Front to Rear Deflection
△H
--
--
2.0
0.078
Feed Hole to Bottom of Component
H1
17.5
0.689
18.5
0.728
Feed Hole to Overall Component Height
H2
21.7
0.854
23.2
0.913
Lead Length After Component Height
L
W0
11.0
0.433
Feed Hole Pitch
P
12.4
0.488
13.0
0.511
Lead Location
P1
4.4
0.173
5.8
0.228
Center of Component Location
P2
5.05
0.198
7.65
0.301
Total Tape Thickness
T
--
--
0.90
0.035
Feed Hole Location
W0
8.5
0.334
9.75
0.384
Adhesive Tape Width
W1
12.5
0.492
13.5
0.531
Adhesive Tape Position
W2
0
0
3.0
0.118
Tape Width
W3
17.5
0.689
19.0
0.748
Part No. : LTL-4221N-002
Page : 5 of 5
BNS-OD-C131/A4
