CD 29L QL Series 7 000h at 85C CD 296 KC * Larger Size Components * Long Useful Life * High Ripple Current * Industrial Power Supplies CD 293 BZ 105C longer life highest current CD 295 BC CD 29D HR longest life larger size higher current CD 29L QL Item Characteristics Operating Temperature Range (C) -40 ~ +85 Voltage Range (V) 16 ~ 400 -25 ~ +85 450 ~ 500 Capacitance Range (F) 390 ~ 120 000 Capacitance Tolerance (20C, 120Hz) 20% Leakage Current (A) After 5 minutes at 20C application of rated voltage, leakage current is not more than 0,01CV or 1,5mA, whichever is smaller C: Nominal Capacitance (F) V: Rated Voltage (V) Rated Voltage (V) Dissipation Factor (20C, 120Hz) 16 Tan (max) Snap-In 35 50 16 ~35 Z -25C / Z +20C 4 Z -40C / Z +20C 15 7 000h 160 ~ 250 350 ~ 450 0,20 0,15 50 ~ 100 160 ~ 200 250 ~ 400 450 3 6 500 8 Load Life >100 000h 500 4 10 Useful Life Lifetime 63 ~ 100 0,60 0,50 0,40 0,30 Rated Voltage (V) Stability at Low Temperature (Impedance Ratio at 120Hz) 25 - Endurance Test 5 000h Shelf Life 5 000h 1000h Leakage Current Not more than specified value Not more than specified Not more than specified value value Capacity Change Within 30% of initial value Within 20% of initial value Within 20% of initial value Within 20% of initial value Not more than 300% of specified value Not more than 200% of specified value Not more than 130% of specified value Not more than 200% of specified value UR UR UR UR UR = 0 IR 1,2 x IR IR IR = 0 IR = 0 85C 40C 85C 85C 85C 1% Failure Rate 1% Failure Rate guaranteed Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level Not more than specified value After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Lifetime Diagram UR < 160V Frequency Coefficient 2.5 Frequency 50Hz Rated Voltage (V) 120Hz 1kHz 10kHz 100kHz CD 29L QL Series IA --- 2.0 50 0,95 1,00 1,10 1,15 1,15 63 ~ 100 0,90 1,00 1,16 1,30 1,33 0,85 1,00 1,20 1,35 CD 29L QL Series IA --- 2.0 IR IR 1.5 160 1.5 1.0 0.5 1,40 0.0 20 1.0 X32 X16 X8 X4 X2 X1 30 40 50 60 70 80 X32 0.5 Lifetime Multiplier IA = actual ripple current at 120Hz, 64 Lifetime Diagram UR 160V 2.5 90 TA (C) 0.0 20 X16 X8 X4 X2 X1 Lifetime Multiplier 30 40 50 60 70 IA = actual ripple current at 120Hz, 80 90 TA (C) IR = rated ripple current at 120Hz, 85C IR = rated ripple current at 120Hz, 85C Multiplier of Useful Life as a function of ambient temperature and ripple current load Multiplier of Useful Life as a function of ambient temperature and ripple current load Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 CD 29L QL Series Ratings for CD 29L QL Series Rated Capacitance Max ESR 20C, 120Hz Typ ESR 20C, 120Hz Max Ripple Current 85C, 120Hz (V) (F) (m) (m) (Arms) 14,3 14,3 11,8 11,8 9,8 9,8 8,0 8,0 6,7 6,7 20,1 20,1 17,1 17,1 14,2 11,9 11,9 9,8 9,8 8,1 19,7 19,7 16,1 13,7 13,7 11,3 11,3 9,5 7,9 27,0 27,0 23,0 23,0 18,1 18,1 14,8 14,8 12,1 12,1 10,3 23,0 23,0 17,7 17,7 14,8 14,8 9,9 33,0 27,0 23,0 23,0 17,7 17,7 14,8 48 48 40 40 33 33 27 27 23 91 74 61 61 52 43 133 111 91 91 74 74 10,0 10,0 8,2 8,2 6,8 6,8 5,6 5,6 4,7 4,7 14,1 14,1 12,0 12,0 9,9 8,3 8,3 6,9 6,9 5,7 13,8 13,8 11,3 9,6 9,6 8,0 8,0 6,7 5,5 18,6 18,6 15,5 15,5 12,7 12,7 10,4 10,4 8,5 8,5 7,2 15,5 15,5 12,4 12,4 10,4 10,4 6,9 22,7 18,6 15,5 15,5 12,4 12,4 10,4 34 34 28 28 23 23 19 19 16 64 52 43 43 35 30 93 78 64 64 52 52 10,4 9,8 10,8 11,5 11,8 11,8 13,2 13,5 15,3 14,8 8,1 8,7 9,0 9,6 9,6 10,3 10,8 11,3 11,8 13,5 8,2 8,0 8,7 10,3 9,6 11,4 10,8 12,1 14,2 7,7 8,1 8,3 8,3 9,1 9,4 11,2 10,8 11,0 14,4 12,8 8,7 8,6 10,2 9,5 11,2 10,7 12,7 6,9 8,7 9,7 9,0 10,5 10,2 12,3 7,0 7,4 8,0 8,9 9,6 9,6 10,4 10,2 12,3 4,9 5,3 5,5 5,5 5,9 7,3 4,3 4,7 5,4 5,4 5,9 5,9 56000 68000 16 (20) 1C 82000 100000 120000 33000 39000 25 (32) 1E 47000 56000 68000 82000 27000 33000 35 (44) 1V 39000 47000 56000 68000 15000 18000 50 (63) 1H 22000 27000 33000 39000 12000 63 (79) 1J 15000 18000 27000 8200 10000 80 (100) 1K 12000 15000 18000 5600 100 (125) 2A 6800 8200 10000 160 (200) 2C 200 (250) 2D 12000 2200 2700 3300 3900 4700 1500 1800 2200 2700 Size O DxL VDC (Surge Voltage) Code Rated Capacitance Max ESR 20C, 120Hz Typ ESR 20C, 120Hz Max Ripple Current 85C, 120Hz (mm) (V) (F) (m) (m) (Arms) 61 61 52 43 199 166 133 133 111 111 91 74 293 293 243 243 199 199 199 166 166 133 133 111 111 91 356 356 293 293 243 243 199 199 199 166 166 133 133 133 111 111 424 424 356 356 356 293 293 293 243 243 199 199 166 166 133 133 111 511 424 356 356 293 293 243 243 199 199 166 133 43 43 36 30 140 117 93 93 78 78 64 52 205 205 170 170 140 140 140 117 117 93 93 78 78 64 249 249 205 205 170 170 140 140 140 117 117 93 93 93 78 78 297 297 249 249 249 205 205 205 170 170 140 140 117 117 93 93 78 358 297 249 249 205 205 170 170 140 140 117 93 6,5 6,5 7,0 9,2 3,7 3,8 4,4 4,5 5,0 5,0 5,4 6,9 3,6 3,6 4,5 4,3 5,2 4,9 4,9 5,6 5,5 6,5 6,2 7,9 7,1 8,7 3,2 2,8 3,7 3,8 4,2 4,1 4,9 4,8 4,6 5,8 5,5 6,6 6,9 6,8 7,9 7,3 3,0 3,0 3,0 3,3 3,4 3,8 4,1 3,8 4,6 4,4 5,7 5,2 5,9 5,9 7,3 7,0 7,9 1,9 2,3 2,5 2,4 3,1 2,8 3,4 3,3 3,9 3,3 4,3 4,8 35 x 45 40 x 40 35 x 50 40 x 50 35 x 60 40 x 50 35 x 80 40 x 60 35 x 105 40 x 80 35 x 40 40 x 40 35 x 45 40 x 40 35 x 50 35 x 60 40 x 50 35 x 80 40 x 60 40 x 80 35 x 45 40 x 40 35 x 50 35 x 60 40 x 50 35 x 80 40 x 60 40 x 70 40 x 80 35 x 40 40 x 40 35 x 45 40 x 40 35 x 50 40 x 50 35 x 80 40 x 60 35 x 80 40 x 70 40 x 80 35 x 50 40 x 40 35 x 70 40 x 50 35 x 80 40 x 60 40 x 80 35 x 50 35 x 60 35 x 70 40 x 50 35 x 80 40 x 60 40 x 80 35 x 45 40 x 40 35 x 50 40 x 50 35 x 70 40 x 60 35 x 80 40 x 60 40 x 80 35 x 45 35 x 50 35 x 70 40 x 60 35 x 80 40 x 80 35 x 40 35 x 45 35 x 50 40 x 40 35 x 60 40 x 50 200 (250) 2D 3300 250 (300) 2E 1500 3900 4700 1000 1200 1800 2200 2700 680 820 350 (400) 2V 1000 1200 1500 1800 2200 560 680 820 400 (450) 2G 1000 1200 1500 1800 470 560 680 450 (500) 2W 820 1000 1200 1500 1800 390 470 560 500 (550) 2H 680 820 1000 1200 1500 Size O DxL (mm) 35 x 80 40 x 60 40 x 80 40 x 90 35 x 40 35 x 45 35 x 50 40 x 40 35 x 70 40 x 50 35 x 70 40 x 80 35 x 45 40 x 40 35 x 60 40 x 50 35 x 70 35 x 70 40 x 60 35 x 80 40 x 70 40 x 80 45 x 70 40 x 100 45 x 70 40 x 100 35 x 50 40 x 40 35 x 60 40 x 50 35 x 60 40 x 50 35 x 70 40 x 60 45 x 50 35 x 80 40 x 60 40 x 80 40 x 90 45 x 80 40 x 100 45 x 80 35 x 50 40 x 40 35 x 50 35 x 60 40 x 50 35 x 60 35 x 70 40 x 50 35 x 80 40 x 60 35 x 80 40 x 60 40 x 70 45 x 70 40 x 100 45 x 70 45 x 100 35 x 50 35 x 60 35 x 60 40 x 60 35 x 80 40 x 70 35 x 90 40 x 70 40 x 80 45 x 70 40 x 90 40 x 100 Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 65 Snap-In VDC (Surge Voltage) Code Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytic Capacitor PC = Polymer Capacitor SMD =V Radial = R Snap-In = S For coding please refer to the pages of ratings PT 101 M Series Code Capacitance Code (in F) Capacitance Tolerance 0,47 = R47 20% FF 25 Lead Form Terminal/ Pitch Size = M SMD: 0611 JE xxxxx Dimension for Specials only 4x7 = 0407 CD VS = BS CD VH = VH 1,0 = 010 CD VZ = VZ 2,2 = 2R2 +30 / -10% = Q Radial: CD 261 = LK 100 = 101 Long Lead = LL 2,0mm = 20 35x80 CD 261X = QX 1000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 10% =K +50 / -10% = T Taped = FF Terminal = T2 5x11,5 = 0511 6,3x11,5= 0611 CD 262 = QM 10000 = 103 Cut4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4 2 Pin CD 294 = BW 6,3mm Pin Length = T6 3 Pin = P3 CD 295 = BC Soldering Pin 4 Pin = P4 CD 296 = KC 5 Pin = P5 CD 297 = BB CD 299 = PG on request: alternative lead forms (axial, 90 - angle, others) = 3580 12,5mm = 12 = S4 = P2 preferred CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Technical Specification SMD Type Dimensions O DxL 4 x 5,4 5 x 5,4 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 6,3 x5,4 6,3x 7,7 8 x 10,5 8 x 11,8 10x10,5 10x12,7 0,5 - 0,8 0,7 - 1,1 in mm Taping Dimensions Size (DxL) w 0,3 A 0,2 B 0,2 P 0,1 t2 0,2 F 0,1 t1 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 14 1 50 1 6,3 18 1 50 1 8; 10 25 1 50 1 Polymer 25 1 80 1 in mm Allowable Range of Peak Temperature Size T (C) t (second) t 1 (second) O 4 ~ 6,3 O 8 x 10,5 O 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 Part Number System Technical Specification Snap-In Type Pin Type: Snap-In Order Code: T6, T4 Pin Type: Soldering Order Code: S4 T6, T4 S4 Terminal T6 T4 Pin Length T 6,3 4,0 Snap-In Terminal Order Code: P2, P3, P4 Soldering Terminal Order Code: P5 P2 P3 P4 P5 Positive Negative Terminal Negative Negative Mounting Holes Mounting Holes Mounting Holes P3 only T4 Terminal Order Code Screw Type EC G Technology Terminal Type 1C BP Rated Voltage Series Code Code 101 M Capacitance Code Capacitance Tolerance CD 135 = BP 100 = 101 EC = Electrolytic Screw = G For coding Capacitor please refer CD 136 = PK 1000 = 102 to the pages CD 137 = PX 10000 = 103 of ratings CD 138 = PC CD 139 = BL B E Mounting 160 A361 JExxxxx For Terminal Code see tables below for Specials only Diameter Length 20% = M Bolt =B 36 = A 53 = 053 10% = K No double sleeve =N 40 = B 65 = 065 +30 / -10%= Q 2 stoppers bracket+double sleeve* = I 51 = C 96 = 096 +20 / -0% = R 3 stoppers bracket+double sleeve* = Y 64 = D 100 = 100 +50 / -10%= T No bracket, but double sleeve* 77 = E 115 = 115 preferred =D * Double sleeve for diameter 51 only 90 = F 236 = 236 101 = G Technical Specification Screw Type Dimensions Standard Housing Order Code: I, Y, D, N Bolt Housing Order Code: B OD Od l O 36 M8 12 O 51 M12 16 in mm 10 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2