G88302149230 - Carlo Gavazzi Group

Du line®

Fieldbus Installationbus

Specifications are subject to change without notice (14.01.05) 1

Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Power supply AC types

Installations cat. III (IEC 60664)

Rated operational voltage

through wire L & N 230 230 VAC ± 15% (IEC 60038)

Frequency 45 to 65 Hz

Drop-out tolerance ≤40 ms

Power consumption Typ. 3.3 VA

Power dissipation ≤2 W

Transient protection volt. 230 4 kV

Insulation voltage

Supply - Dupline®≥4 kVAC (rms)

Supply - Outputs ≥4 kVAC (rms)

Dupline®- Outputs ≥4 kVAC (rms)

Product Description Ordering Key

Type: Dupline®

Housing

Receiver

No. of channels

Output type

Power supply

Output Module for Rollerblind Motor

Type G 8830 2149 230

• Up/down control of 1 rollerblind motor

• Up/down interlocking for motor

•AC power supply

•Channel coding by GAP 1605

•Design for mounting in Euro box

Dupline®output module for

up/down control of one

rollerblind motor. A built-in

up/down interlocking function

protects the motors. The

motor requires two Dupline®

channels, one for “UP” and

one for “DOWN”. For intelli-

Type Selection

Supply Ordering no.

2 channel

5 A/250 VAC

230 VAC G 8830 2149 230

gent control of the rollerblind

motors it is recommended to

use the Master Generator

G3800x01x which has this

function built in.

Output Specifications

Outputs

1 SPST relay & 1 SPDT relay

Resistive loads AC 1 5 A/250 VAC (1250 VA)

DC 1 0.25 A/250 VDC (62 W)

Inductive loads AC 15 2.5 A/230 VAC

DC 13 5 A/24 VDC

Mechanical lifetime ≥30 x 106operations

Electrical lifetime

(at max load) AC 1 ≥2.0 x 105operations

Operating frequency ≤7200 operations/h

Insulation voltage

Outputs - Dupline®≥4 kVAC (rms)

Response time 1 pulse train

G 8830 2149 230

Supply Specifications

General Specifications

Output OFF delay

Upon loss of Dupline®carrier 20 ms

Power ON delay Typ. 2 s

Power OFF delay ≤1 s

Environment

Pollution degree 3 (IEC 60664)

Operating temperature -2 0° to +50°C (-4° to +122°F)

Storage temperature

-50° to +85°C (-58° to +185°F)

Humidity (non-condensing) 20 to 80%

Mechanical resistance

Shock 15 G (11 ms)

Vibration 2 G (6 to 55 Hz)

Dimensions (h x w x d) 50 x 50 x 30

Material ABS

Weight 100 g

Du line®

Fieldbus Installationbus

2Specifications are subject to change without notice (14.01.05)

Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

D+

D-

Supply

Brown Blue

White Blac

O1 O2

Brown

Orange Red

G 8830 2149 230

Mode of Operation

As indicated on the wiring

diagram, there are two relays

in series to control the motor.

O1 is used to switch the

Motor ON/OFF and O2 is

used to control the direction

of the Motor UP/DOWN. In

this way, it is made sure that

the motors are not controlled

UP and DOWN at the same

time (interlocking). O1 and O2

may be coded individually by

means of the code pro-

grammer GAP 1605. The de-

fault setting of the module is

to switch all outputs off in

case of loss of Dupline®

carrier signal.

The Master Generator

G380X01X provides intelligent

functions that makes it easy

for the user to control the

rollerblind motors individually

or several at the same time

(all UP or all DOWN).

Wiring Diagram

Accessories

Programming cable to GAP 1650 GAP-TPH-CAB

Dimensions (mm)

Wiring Connections

Bus: White = Dupline signal, D+

Black = Dupline signal, D-

Supply: Brown = L

Blue = N

Output: Brown = O1, Motor on/off

Orange = O2, Motor up/down

Red = O2, Motor up/down

Bus wires: 2 x 0,75 mm2

250V isolation, single core, 150 mm

Supply, Output: 5 x 1,5 mm2

250V isolation, single core, 150 mm

Dot

Programming Cable

GAP-TPH-CAB