Semiconductor Components Industries, LLC, 2001
May, 2001 – Rev. 3 1Publication Order Number:
MC74LCX74/D
MC74LCX74
Low-Voltage CMOS Dual
D-Type Flip-Flop
With 5 V–Tolerant Inputs
The MC74LCX74 is a high performance, dual D–type flip–flop
with asynchronous clear and set inputs and complementary (O, O)
outputs. It operates from a 2.3 to 3.6 V supply. High impedance TTL
compatible inputs significantly reduce current loading to input drivers
while TTL compatible outputs offer improved switching noise
performance. A VI specification of 5.5 V allows MC74LCX74 inputs
to be safely driven from 5 V devices.
The MC74LCX74 consists of 2 edge–triggered flip–flops with
individual D–type inputs. The flip–flop will store the state of
individual D inputs, that meet the setup and hold time requirements, on
the LOW–to–HIGH Clock (CP) transition.
Designed for 2.3 V to 3.6 V VCC Operation
5 V Tolerant Inputs – Interface Capability With 5 V TTL Logic
LVTTL Compatible
LVCMOS Compatible
24 mA Balanced Output Sink and Source Capability
Near Zero Static Supply Current in All Three Logic States (10 µA)
Substantially Reduces System Power Requirements
Latchup Performance Exceeds 500 mA
ESD Performance: Human Body Model >2000 V;
Machine Model >200 V
http://onsemi.com
Device Package Shipping
ORDERING INFORMATION
MC74LCX74D SO–14 55 Units/Rail
MC74LCX74DR2 SO–14
MC74LCX74DT TSSOP–14
2500 Units/Reel
96 Untis/Rail
MARKING
DIAGRAMS
MC74LCX74DTR2 TSSOP–14 2500 Units/Reel
MC74LCX74M EIAJ
SO–14 50 Units/Rail
MC74LCX74MEL EIAJ
So–14 2000 Units/Reel
TSSOP–14
DT SUFFIX
CASE 948G
14
1
EIAJ SO–14
M SUFFIX
CASE 965
SO–14
D SUFFIX
CASE 751A
14
1
1
14
1
14
LCX
74
ALYW
LCX74
AWLYWW
A = Assembly Location
L, WL = Wafer Lot
Y = Year
W, WW = Work Week
1
14
1
74LCX74
ALYW
14
MC74LCX74
http://onsemi.com
2
Figure 1. Pinout: 14–Lead (Top View)
1314 12 11 10 9 8
21 34567
VCC CD2 D2 CP2 SD2O2 O2
CD1 D1 CP1 SD1O1 O1 GND
Figure 2. Logic Diagram
O1
SD1
Q
4
5
D1 D
2
CP1 CP
3
CD1 1
O1
Q6
SD
CD
O2
SD2
Q
10
9
D2 D
12
CP2 CP
11
CD2 13
O2
Q8
SD
CD
PIN NAMES
Pins Function
CP1, CP2 Clock Pulse Inputs
D1–D2 Data Inputs
CD1, CD2Direct Clear Inputs
SD1, SD2Direct Set Inputs
On–On Outputs
TRUTH TABLE
Inputs Outputs
SDn CDn CPn Dn On On Operating Mode
L H X X H L Asynchronous Set
H L X X L H Asynchronous Clear
L L X X H H Undetermined
H H h H L
L d dR dR it
H H l L H Load and Read Register
H H X NC NC Hold
H = High Voltage Level
h = High Voltage Level One Setup Time Prior to the Low–to–High Clock Transition
L = Low Voltage Level
l = Low Voltage Level One Setup Time Prior to the Low–to–High Clock Transition
NC = No Change
X = High or Low Voltage Level and Transitions are Acceptable
= Low–to–High Transition
= Not a Low–to–High Transition
For ICC reasons, DO NOT FLOAT Inputs
MC74LCX74
http://onsemi.com
3
MAXIMUM RATINGS
Symbol Parameter Value Condition Unit
VCC DC Supply Voltage –0.5 to +7.0 V
VIDC Input Voltage –0.5 VI +7.0 V
VODC Output Voltage –0.5 VO VCC + 0.5 Output in HIGH or LOW State (Note 1.) V
IIK DC Input Diode Current –50 VI < GND mA
IOK DC Output Diode Current –50 VO < GND mA
+50 VO > VCC mA
IODC Output Source/Sink Current ±50 mA
ICC DC Supply Current Per Supply Pin ±100 mA
IGND DC Ground Current Per Ground Pin ±100 mA
TSTG Storage Temperature Range –65 to +150 °C
Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those
indicated may adversely affect device reliability. Functional operation under absolute maximum–rated conditions is not implied. Functional
operation should be restricted to the Recommended Operating Conditions.
1. IO absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Type Max Unit
VCC Supply Voltage Operating
Data Retention Only 2.0
1.5 2.5, 3.3
2.5, 3.3 3.6
3.6 V
VIInput Voltage 0 5.5 V
VOOutput Voltage (HIGH or LOW State) (3–State) 0 VCC V
IOH HIGH Level Output Current VCC = 3.0 V – 3.6 V
VCC = 2.7 V – 3.0 V
VCC = 2.3 V – 2.7 V
–24
–12
–8
mA
IOL LOW Level Output Current VCC = 3.0 V – 3.6 V
VCC = 2.7 V – 3.0 V
VCC = 2.3 V – 2.7 V
+24
+12
+8
mA
TAOperating Free–Air Temperature –40 +85 °C
t/VInput Transition Rise or Fall Rate, VIN from 0.8 V to 2.0 V, VCC = 3.0 V 0 10 ns/V
MC74LCX74
http://onsemi.com
4
DC ELECTRICAL CHARACTERISTICS
TA = –40°C to +85°C
Symbol Characteristic Condition Min Max Unit
VIH HIGH Level Input Voltage (Note 2.) 2.3 V VCC 2.7 V 1.7 V
2.7 V VCC 3.6 V 2.0
VIL LOW Level Input Voltage (Note 2.) 2.3 V VCC 2.7 V 0.7 V
2.7 V VCC 3.6 V 0.8
VOH HIGH Level Output Voltage 2.3 V VCC 3.6 V; IOH = –100 µA VCC 0.2 V
VCC = 2.3 V; IOH = –8 mA 1.8
VCC = 2.7 V; IOH = –12 mA 2.2
VCC = 3.0 V; IOH = –18 mA 2.4
VCC = 3.0 V; IOH = –24 mA 2.2
VOL LOW Level Output Voltage 2.3 V VCC 3.6 V; IOL = 100 µA 0.2 V
VCC = 2.3 V; IOL = 8 mA 0.6
VCC = 2.7 V; IOL = 12 mA 0.4
VCC = 3.0 V; IOL = 16 mA 0.4
VCC = 3.0 V; IOL = 24 mA 0.55
IIInput Leakage Current 2.3 V VCC 3.6 V; 0 V VI 5.5 V ±5µA
ICC Quiescent Supply Current 2.3 VCC 3.6 V; VI = GND or VCC 10 µA
2.3 VCC 3.6 V; 3.6 VI or VO 5.5 V ±10
ICC Increase in ICC per Input 2.3 VCC 3.6 V; VIH = VCC – 0.6 V 500 µA
2. These values of VI are used to test DC electrical characteristics only.
AC CHARACTERISTICS tR = tF = 2.5 ns; RL = 500
Limits
TA = –40°C to +85°C
VCC = 3.3 V 0.3 V VCC = 2.7 V VCC = 2.5 V 0.2 V
CL = 50 pF CL = 50 pF CL = 30 pF
Symbol Parameter Waveform Min Max Min Max Min Max Unit
fmax Clock Pulse Frequency 1 150 150 150 MHz
tPLH Propagation Delay 1 1.5 7.0 1.5 8.0 1.5 8.4
tPHL CPn to On or On 1.5 7.0 1.5 8.0 1.5 8.4 ns
tPLH Propagation Delay 2 1.5 7.0 1.5 8.0 1.5 8.4
tPHL SDn or CDn to On or On 1.5 7.0 1.5 8.0 1.5 8.4 ns
tsSetup Time, HIGH or LOW Dn to CPn 1 2.5 2.5 4.0 ns
thHold Time, HIGH or LOW Dn to CPn 1 1.5 1.5 2.0 ns
twCPn Pulse Width, HIGH or LOW 4 3.3 3.3 4.0 ns
SDn or CDn Pulse Width, LOW 3.3 3.6 4.0 ns
trec Recovery Time SDn or CDn to CPn 3 2.5 3.0 4.5 ns
tOSHL Output–to–Output Skew 1.0 ns
tOSLH (Note 3.) 1.0
3. Skew is defined as the absolute value of the dif ference between the actual propagation delay for any two separate outputs of the same device.
The specification applies to any outputs switching in the same direction, either HIGH–to–LOW (tOSHL) or LOW–to–HIGH (tOSLH); parameter
guaranteed by design.
MC74LCX74
http://onsemi.com
5
DYNAMIC SWITCHING CHARACTERISTICS
TA = +25°C
Symbol Characteristic Condition Min Typ Max Unit
VOLP Dynamic LOW Peak Voltage
(Note 4.) VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V
VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V 0.8
0.6 V
V
VOLV Dynamic LOW Valley Voltage
(Note 4.) VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V
VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V –0.8
–0.6 V
V
4. Number of outputs defined as “n”. Measured with “n–1” outputs switching from HIGH–to–LOW or LOW–to–HIGH. The remaining output is
measured in the LOW state.
CAPACITIVE CHARACTERISTICS
Symbol Parameter Condition Typical Unit
CIN Input Capacitance VCC = 3.3 V, VI = 0 V or VCC 7 pF
COUT Output Capacitance VCC = 3.3 V, VI = 0 V or VCC 8 pF
CPD Power Dissipation Capacitance 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 25 pF
MC74LCX74
http://onsemi.com
6
trec
WAVEFORM 3 – RECOVERY TIME
tR = tF = 2.5 ns from 10% to 90%; f = 1 MHz; tw = 500 ns
Vcc
0 V
Vcc
0 V
Vmi
Vmi
Figure 3. AC Waveforms
WAVEFORM 2 – PROPAGATION DELAYS
tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns
SDn, CDn
CPn
Vcc
0 V
SDn
CDn1.5 V
On
Vcc
0 V
VOH
Vmo
On
VOL
Vmo
Vmo
Vmo
tPLH tPHL
tPHL
tPLH
WAVEFORM 1 – PROPAGATION DELAYS, SETUP AND HOLD TIMES
tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns
Vcc
0 V
Dn
CPn
Vmi
On,
On
Vcc
0 V
VOH
VOL
tPLH, tPHL
th
ts
Vmi
Vmo
fmax
tw
tw
MC74LCX74
http://onsemi.com
7
WAVEFORM 4 – PULSE WIDTH
tR = tF = 2.5 ns (or fast as required) from 10% to 90%;
Output requirements: VOL 0.8 V, VOH 2.0 V
Vcc
0 V
Vcc
0 V
Vmi
Vmi
tw
Vmi
Vmi tw
CPn
SDn, CDn, CPn
Vcc
Symbol 3.3 V + 0.3 V 2.7 V 2.5 V + 0.2 V
Vmi 1.5 V 1.5 V Vcc/2
Vmo 1.5 V 1.5 V Vcc/2
Figure 3. AC Waveforms (Continued)
PULSE
GENERATOR RT
DUT
VCC
RL
CL
CL= 50 pF at VCC = 3.3 + 0.3 V or equivalent (includes jig and probe capacitance)
CL= 30 pF at VCC = 2.5 + 0.2 V or equivalent (includes jig and probe capacitance)
RL= R1 = 500 or equivalent
RT= ZOUT of pulse generator (typically 50 )
Figure 4. Test Circuit
MC74LCX74
http://onsemi.com
8
PACKAGE DIMENSIONS
TSSOP–14
DT SUFFIX
CASE 948G–01
ISSUE O
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A4.90 5.10 0.193 0.200
B4.30 4.50 0.169 0.177
C--- 1.20 --- 0.047
D0.05 0.15 0.002 0.006
F0.50 0.75 0.020 0.030
G0.65 BSC 0.026 BSC
H0.50 0.60 0.020 0.024
J0.09 0.20 0.004 0.008
J1 0.09 0.16 0.004 0.006
K0.19 0.30 0.007 0.012
K1 0.19 0.25 0.007 0.010
L6.40 BSC 0.252 BSC
M0 8 0 8

S
U0.15 (0.006) T
2X L/2
S
U
M
0.10 (0.004) V S
T
L–U–
SEATING
PLANE
0.10 (0.004)
–T–
ÇÇÇ
ÇÇÇ
ÇÇÇ
SECTION N–N
DETAIL E
JJ1
K
K1
ÉÉ
ÉÉ
DETAIL E
F
M
–W–
0.25 (0.010)
8
14
7
1
PIN 1
IDENT.
H
G
A
D
C
B
S
U0.15 (0.006) T
–V–
14X REFK
N
N
SO–14
D SUFFIX
CASE 751A–03
ISSUE F
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH
OR GATE BURRS SHALL NOT EXCEED 0.15
(0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED
0.25 (0.010) PER SIDE.
5. DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN
EXCESS OF THE K DIMENSION AT MAXIMUM
MATERIAL CONDITION.
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7. DIMENSION A AND B ARE TO BE DETERMINED
AT DATUM PLANE -W-.
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
–A–
–B–
G
P7 PL
14 8
71 M
0.25 (0.010) B M
S
B
M
0.25 (0.010) A S
T
–T–
F
RX 45
SEATING
PLANE D14 PL K
C
J
M
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A8.55 8.75 0.337 0.344
B3.80 4.00 0.150 0.157
C1.35 1.75 0.054 0.068
D0.35 0.49 0.014 0.019
F0.40 1.25 0.016 0.049
G1.27 BSC 0.050 BSC
J0.19 0.25 0.008 0.009
K0.10 0.25 0.004 0.009
M0 7 0 7
P5.80 6.20 0.228 0.244
R0.25 0.50 0.010 0.019
 
MC74LCX74
http://onsemi.com
9
PACKAGE DIMENSIONS
EIAJ SO–14
M SUFFIX
CASE 965–01
ISSUE O
ZD
HE
E
1
14 8
7
bA1
A
e
L
DIM MIN MAX MIN MAX
INCHES
 2.05  0.081
MILLIMETERS
0.05 0.20 0.002 0.008
0.35 0.50 0.014 0.020
0.18 0.27 0.007 0.011
9.90 10.50 0.390 0.413
5.10 5.45 0.201 0.215
1.27 BSC 0.050 BSC
7.40 8.20 0.291 0.323
0.50 0.85 0.020 0.033
1.10 1.50 0.043 0.059
0
0.70 0.90 0.028 0.035
 1.42  0.056
A1
A
b
c
D
E
e
L
M
Z
HE
Q1
LE
10 0
10
LEQ1
c
M
VIEW P
DETAIL P
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH OR PROTRUSIONS AND ARE MEASURED
AT THE PARTING LINE. MOLD FLASH OR
PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006)
PER SIDE.
4. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
5. THE LEAD WIDTH DIMENSION (b) DOES NOT
INCLUDE DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.08 (0.003)
TOTAL IN EXCESS OF THE LEAD WIDTH
DIMENSION AT MAXIMUM MATERIAL CONDITION.
DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OR THE FOOT. MINIMUM SPACE
BETWEEN PROTRUSIONS AND ADJACENT LEAD
TO BE 0.46 ( 0.018).
0.13 (0.005) M0.10 (0.004)
MC74LCX74
http://onsemi.com
10
Notes
MC74LCX74
http://onsemi.com
11
Notes
MC74LCX74
http://onsemi.com
12
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–spanish@hibbertco.com
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 1–303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–asia@hibbertco.com
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
MC74LCX74/D
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email: ONlit–german@hibbertco.com
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email: ONlit–french@hibbertco.com
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email: ONlit@hibbertco.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland