PowerPlus DC
• Optically Isolated MOSFET output
• Ratings from 10A to 100A @ 72 VDC
• AC and DC control
• Relays are easily paralleled for higher-current applications
• LED Status Indicator
• Optional IP20 Cover
• UL Recognized, CE and RoHS Compliant
• PWM to 1K Hz
PRODUCT SELECTION
Control Voltage 10A 20A 40A 60A 80A 100A
4-32 VDC DC100D10 DC100D20 DC100D40 DC100D60 DC100D80 DC100D100
90-140 VAC DC100A10 DC100A20 DC100A40 DC100A60
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description 10A 20A 40A 60A 80A 100A
Operating Voltage [Vdc] (2) 1-72 VDC 1-72 VDC 1-72 VDC 1-72 VDC 7-72 VDC 7-72 VDC
Blocking Voltage 100 100 100 100 100 100
Rated Load Current [Adc] (3) 10 20 40 60 80 100
Minimum Load Current [mA] (4) 2.5 2.5 2.5 2.5 2.5 2.5
Maximum Surge Current [Adc] (10ms) 66 91 136 167 215 272
Maximum On-State Voltage Drop @ Rated Current [Vdc] 0.32 0.34 0.6 00.6 0.72 0.56
Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.15 0.15 0.15 0.15 0.15 0.15
Thermal Resistance Junction to Case (Rjc ) [°C/W] 1.44 0.85 0.78 0.58 0.55 0.42
Maximum On-Sta te R e sis t ance @ Rated Current [RDS-ON][mOhms] 32 17 15 10 95.6
Maximum PWM [Hz] (5) 1K 1K 900 900 700 700
INPUT SPECIFICATIONS (1)
Description DCxxxDxx DCxxxAxx
Control Voltage Range 4-32 VDC 90-140 VAC
Minimum Input Current @ min Control Voltage [mA] 11 11
Maximum Input Current @ max Control Voltage [mA] 12 13
Nominal Input Impedance Current Regulated Current Regulated
Maximum Turn-On Time [msec] 0.075 10
Maximum Turn-Off Time [msec] 0.32 10
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms
Minimum Insulation Resistance (@ 500 V DC) 109 Ohm
Maximum Capacitance, Input/Output 10 pF
Ambient Operating Temperature Range (6) -30 to 80°C
Ambient Storage Temperature Range -40 to 125 °C
Housing Material Valox 420 SEO Black, UL 94 V-0
Weight (typical) (7) 2.65 oz (75g)
Encapsulation (8) Epoxy Free
Terminal Finish Electroless Nickel
Recommended Terminal Screw Torque (6-32) [in lbs/Nm] 10/1.1
Recommended Terminal Screw Torque (8-32) [in lbs/Nm] 20/2.2
GENERAL NOTES
1) All parameters at 40°C and per secti on unl ess otherwis e spec if i ed.
2) Maximum voltage is 100VDC
3) Heat sinking required, see deratin g curves.
4) Low current loads and high ambient temperature can affect turn-on tim e.
5) @ a minimum of 8VDC control. See PWM Derating Information page 3.
6) Maximum Ambient Operating Tem perat ure for the AC control rel ays is 65° C.
7) Typical weight for the AC control rel a ys is 2.99 oz/85g.
8) AC controlled rel ays contai n thermal conductive epoxy.
MECHANICAL SPECIFICATIONS
WIRING DIAGRAM
PWM DERATE INFORMATION
AGENCY APPROVALS
IEC 61000-4-2 Electrostatic Discharge Level 3, Criteria A
IEC 61000-4-4 Electri c ally Fast Transients Level 3, Criteri a A
IEC 61000-4-5 Electri cal Surges Level 3, Criteria A
E116950
072312
THERMAL DERATE INFORMATION
ANNEX - ENVIROMENTAL INFORMATION
