TLP180
2009-01-19
1
TOSHIBA Photocoupler GaAs Ired & PhotoTransistor
TLP180
Telephone Use Equipment
Programmable Controllers
AC / DCInput Module
Telecommunication
The TOSHIBA mini flat coupler TLP180 is a small outline coupler, suitable
for surface mount assembly.
TLP180 consist of a photo transistor, optically coupled to a gallium
arsenide infrared emitting diode connected inverse parallel, and can
operate directly by AC input current.
Collector-emitter voltage: 80 V (min)
Current transfer ratio: 50% (min)
Rank GB: 100% (min)
Isolation voltage: 3750 Vrms (min)
UL recognized: UL1577, file No. E67349
BSI approved: BS EN60065:2002, certificate no.8285
BS EN60950-1:2002, certificate no.8286
Current Transfer Ratio
Current Transfer Ratio
IF = 5 mA, VCE = 5 V, Ta = 25
Classi-
fication(*1) Min Max
Marking Of
Classification
Standard 50 600
Blank, YE, GR, BL , GB
Rank Y 50 150 YE
Rank GR 100 300 GR
Rank BL 200 600 BL
Rank GB 100 600 GB
The product with the Rank Y and BL are limited in production.
For details, please contact your nearest Toshiba sales representative.
(*1): Ex. rank GB: TLP180 (GB)
(Note) Application type name for certification test,
please use standard product type name, i.e.
TLP180(GB): TLP180
TOSHIBA 114C1
Weight: 0.09 g (typ.)
Pin Configuration
(top view)
6
1: Anode, Cathode
3: Cathode, Anode
4: Emitter
6: Collector
4
1
3
Unit in mm
TLP180
2009-01-19
2
Absolute Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Forward current IF(RMS) ±50 mA
Forward current detating (Ta53°C) ΔIF / °C 0.7 mA / °C
Pulse forward current (Note 1) IFP ±1 A
LED
Junction temperature Tj 125 °C
Collectoremitter voltage VCEO 80 V
Emittercollector voltage VECO 7 V
Collector current IC 50 mA
Power dissipation PC 150 mW
Power dissipation derating (Ta 25°C) ΔPC / °C 1.5 mW / °C
Detector
Junction temperature Tj 125 °C
Storage temperature range Tstg 55 to 125 °C
Operating temperature range Topr 55 to 100 °C
Lead soldering temperature (10 s) Tsol 260 °C
Total package power dissipation PT 200 mW
Total package power dissipation derating (Ta 25°C) ΔPT / °C 2.0 mW / °C
Isolation voltage (AC,1 min., R.H. 60%) (Note 2) BVS 3750
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Pulse width 100 μs,f=100 Hz
Note 2: Device considered a two terminal device: Pins 1 and 3 shorted together and 4 and 6 shorted together.
Recommended Operating Conditions
Characteristic Symbol Min Typ. Max Unit
Supply voltage VCC 5 48 V
Forward current IF(RMS) 16 20 mA
Collector current IC 1 10 mA
Operating temperature Topr 25
85 °C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
TLP180
2009-01-19
3
Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Forward voltage VF I
F = ±10 mA 1.0 1.15 1.3 V
LED
Capacitance CT V = 0, f = 1 MHz 60 pF
Collectoremitter
breakdown voltage V(BR) CEO IC = 0.5 mA 80 V
Emittercollector
breakdown voltage V(BR) ECO IE = 0.1 mA 7 V
VCE = 48 V (ambient light
below 1000 x)
(Note 3)
0.01
(2)
0.1
(10) μA
Collector dark current ICEO VCE = 48 V (ambient light
Ta = 85°C below 1000 x)
(Note 3)
2
(4)
50
(50) μA
Detector
Capacitance
(collector to emitter) CCE V = 0, f = 1 MHz 10 pF
Note 3: Please use standard electric lamp to light up the device's marking surface.
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
IF = ±5 mA, VCE = 5 V 50 600
Current transfer ratio IC / IF Rank GB 100 600
%
IF = ±1 mA, VCE = 0.4 V 60
Saturated CTR IC / IF (sat) Rank GB 30
%
IC = 2.4 mA, IF = ±8 mA 0.4
IC = 0.2 mA, IF = ±1 mA 0.2
Collectoremitter
saturation voltage VCE (sat)
Rank GB 0.4
V
Offstate collector current IC(off) V
F = ± 0.7 V, VCE = 48 V 1 10 μA
CTR symmetry IC (ratio) IC (IF = 5 mA) / IC (IF = 5 mA)
(Note 4) 0.33 1 3
Note 4: IC(ratio)= 5V)
CE
V,
F1
I
F
(I
C1
I
5V)
CE
V,
F2
I
F
(I
C2
I
==
==
IC1
IC2
VCE
IF1
IF2
TLP180
2009-01-19
4
Isolation Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Capacitance input to output CS VS = 0 V, f = 1 MHz 0.8 pF
Isolation resistance RS VS = 500 V, R.H. 60% 5×1010 1014 Ω
AC, 1 minute 3750
AC, 1 second, in oil 10000
Vrms
Isolation voltage BVS
DC, 1 minute, in oil 10000 V
dc
Switching Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Rise time tr 2
Fall time tf 3
Turnon time tON 3
Turnoff time tOFF
VCC = 10 V, IC = 2 mA
RL = 100 Ω
3
μs
Turnon time tON 2
Storage time ts 25
Turnoff time tOFF
RL = 1.9 kΩ (Fig.1)
VCC = 5 V, IF = ±16 mA
40
μs
Fig. 1: Switching time test circuit
tOFF
tON
VCE
IF
ts VCC
4.5V
0.5V
VCC
RL
IF
VCE
TLP180
2009-01-19
5
PC – Ta
200
20 0 20 40 60 80 100 120
160
120
80
40
0
Allowable collector power
dissipation PC (mW)
Ambient temperature Ta (°C)
IFP – DR
Duty cycle ratio DR
Pulse forward current IFP (mA)
3000
10
Pulse width 100 μs
Ta = 25°C
103 102101 100
30
50
100
300
1000
500
ΔVF / ΔTa IF
Forward current IF (mA)
Forward voltage temperature
coefficient ΔVF / ΔTa ( mV / ° C )
3.2
0.4
0.1
2.8
2.4
2.0
1.6
1.2
0.8
0.3 0.5 1 3 5 10 30 50
IFP – VFP
Pulse forward voltage VFP (V)
1000
1
0.6
500
300
100
50
30
10
5
3
1.0 1.4 1.8 2.2 2.6 3.0
Pulse width 10 μs
Repetitive
Frequency = 100 Hz
Ta = 25°C
Pulse forward current IFP (mA)
IF – Ta
Ambient temperature Ta (°C)
Allowable forward current
IF (mA)
100
20
80
60
40
20
0
0 20 40 60 80 100 120
IF – VF
Forward voltage VF (V)
Forward current IF (mA)
100
0.001
0
10
1
0.1
0.01
0.4 0.8 1.2 1.6 2
25°C 85°C 25
°C
TLP180
2009-01-19
6
Collector current IC (mA)
IC – VCE
50
0
Collector-emitter voltage VCE (V)
0
40
30
20
10
2 4 6 8 10
50
mA
30
mA
2
0
mA
1
5
mA
10
mA
PC(MAX)
IF = 5 mA
Ta = 25°C
Collector-emitter voltage VCE (V)
Forward current IF (mA)
IC / IF – IF
Current transfer ratio
I
C / IF (%)
1000
10
0.1 0.3 0.5 1 3 5 10 30 50
30
50
100
300
500
VCE = 10 V
VCE = 5 V
VCE = 0.4 V
Ta = 25°C
Sample B
Sample A
Collector dark current ID(ICEO) (μA)
ICEO – Ta
Ambient temperature Ta (°C)
0
101
VCE = 48V
5
V
1
0
V
24
V
20 40 60 80 100
100
10
1
10
2
10
3
10
4
IC – IF
Forward current IF (mA)
Collector current IC (mA)
0.1
0.1
0.3
0.5
1
3
5
10
30
50
100
0.3 0.5 1 3 5 10 30 50
Sample A
Sample B
Ta = 25°C
VCE = 10 V
VCE = 5 V
VCE = 0.4 V
IC – VCE
30
0
0 1.0
0.2 0.4 0.6 0.8
20
10
Collector current IC (mA)
50
mA
Ta = 25°C
4
0
mA
30
mA
2
0
mA
10
mA
5
mA
2 mA
TLP180
2009-01-19
7
VCE(sat) – Ta
Ambient temperature Ta (°C)
Collector-emitter saturation
voltage VCE(sat) (V)
0.24
0
40
0.20
0.12
0.08
0.04
20 0 40 80 100 20 60
0.16
IF = 5 mA, IC = 1 mA
IF = 1 mA, IC = 0.2mA
IF = 1 mA
IC = 0.2 mA
IC – Ta
Collector current IC (mA)
100
1
20 100
0 20 40 80
30
5
60
0.1
0.3
0.5
3
10
50
VCE = 5 V
1mA
0.5mA
5
mA
1
mA
IF = 25mA
Ambient temperature Ta (°C)
Switching Time – RL
Load resistance RL (k)
1
10
30
50
100
300
500
1000
3 5 30 50
Switching time (μs)
5
3
1
Ta = 25°C
IF = 16 mA
VCC = 5 V
tOFF
ts
tON
100 10
Switching time (μs)
Switching Time Ta
0
160
20 20 40 60 80
Ambient temperature Ta (°C)
30
10
1
0.5
0.1
100
0.3
3
5
50 tOFF
ts
tON
IF = 16 mA
VCC = 5 V
RL = 1.9 kΩ
TLP180
2009-01-19
8
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMEN T.
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.