Amphenol® Bristle Brush Contact:
Multiple Strands of High Tensile Strength
Wires Bundled Together, Providing Superior
Electrical Connection with Low Mating Force
Amphenol’s Broad Family
of Low Mating Force
Interconnect Products
with Brush Contacts
The Bristle Brush contact has been
proven in military avionics pack-
ages and meets the requirements
of MIL-DTL-55302. It provides high
density in tighter spacing, low mat-
ing/unmating forces, proven durabil-
ity and long contact life. Applications
for Amphenol® Connectors with
Brush contacts include:
• Medical equipment
• IC chip testers
• Telecommunications
• Military and Commercial Aviation
• Military Ground Vehicles
• GPS systems
Other Similar Rectangular
Connectors from Amphenol
For more information, see additional Amphenol
Rectangular Products at the end of this catalog.
Design Flexibility -
Combination of Brush
Contacts and Fiber
Optic Termini
Combination of Brush
Contacts, Coax and
Power Contacts
Power Strip Connector
Series with cavities for
size 16 or 12 power
contacts (or size 16 or
12 coax contacts).
Hybrid Custom
Connector with Brush
Contacts and
Power Contacts
Docking Connectors -
The Brush Contact
offers high performance
where frequent docking
to charge and transfer
data is a necessity.
High Density
HDB3 and HSB3 Series
LRM (Line Replaceable Module)
Interconnects
Ruggedized
Brush Rack & Panel
Connectors
Ruggedized
VME64x Interconnects
High Speed LRM
Gigastak &
Digastak Inserts
Amphenol® Low Mating Force
Rectangular Connectors
12-035-12
www.amphenol-aerospace.com
Visit our website and see the very broad range of cylindrical and
rectangular interconnection products from Amphenol Aerospace.
Amphenol Corporation
Amphenol Aerospace Operations
40-60 Delaware Avenue, Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157
www.amphenol-aerospace.com
Amphenol
Aerospace
MIL-DTL-55302
BRUSH CONTACT TECHNOLOGY
Amphenol® Bristle Brush Contact:
Multiple Strands of High Tensile Strength
Wires Bundled Together, Providing Superior
Electrical Connection with Low Mating Force
Amphenol’s Broad Family
of Low Mating Force
Interconnect Products
with Brush Contacts
The Bristle Brush contact has been
proven in military avionics pack-
ages and meets the requirements
of MIL-DTL-55302. It provides high
density in tighter spacing, low mat-
ing/unmating forces, proven durabil-
ity and long contact life. Applications
for Amphenol® Connectors with
Brush contacts include:
• Medical equipment
• IC chip testers
• Telecommunications
• Military and Commercial Aviation
• Military Ground Vehicles
• GPS systems
Other Similar Rectangular
Connectors from Amphenol
For more information, see additional Amphenol
Rectangular Products at the end of this catalog.
Design Flexibility -
Combination of Brush
Contacts and Fiber
Optic Termini
Combination of Brush
Contacts, Coax and
Power Contacts
Power Strip Connector
Series with cavities for
size 16 or 12 power
contacts (or size 16 or
12 coax contacts).
Hybrid Custom
Connector with Brush
Contacts and
Power Contacts
Docking Connectors -
The Brush Contact
offers high performance
where frequent docking
to charge and transfer
data is a necessity.
High Density
HDB3 and HSB3 Series
LRM (Line Replaceable Module)
Interconnects
Ruggedized
Brush Rack & Panel
Connectors
Ruggedized
VME64x Interconnects
High Speed LRM
Gigastak &
Digastak Inserts
Amphenol® Low Mating Force
Rectangular Connectors
12-035-12
www.amphenol-aerospace.com
Visit our website and see the very broad range of cylindrical and
rectangular interconnection products from Amphenol Aerospace.
Amphenol Corporation
Amphenol Aerospace Operations
40-60 Delaware Avenue, Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157
www.amphenol-aerospace.com
Amphenol
Aerospace
MIL-DTL-55302
BRUSH CONTACT TECHNOLOGY
Brush Contact Innovation
• Multiplecontactinterfaces-
Strandsofhightensilewireare
bundledtogethertoform
brush-likecontacts.Byinter-
meshingtwomulti-strandwire
bundles,anelectricalconnection
ismade.
• Providesredundantcurrent
paths,14-70(pointsofcontact)
permatedcontactwithagas
tightjunction
• Verysmooth(lowfriction)
interface
ConventionalPin/Socket
• Machinedsurfacenishon
bothparts
• Higherfrictionandwear
• Limitednumberofcontactsites
Amphenol’s High Technology
Machining and Computer Driven
Centers for Connector and
Contact Production
Brush vs. Conventional Contacts
AmphenolAerospace,locatedin
upstateNewYorkUSA,has
diversemanufacturingcapability
includingstateoftheartCNC
machining,die-casting,molding,
impactandextruding,screw
machiningandplating.
Alsowithinthisfacilityarecom-
pletedesignengineeringand
environmentaltestfacilities.
Hightechnologyproductioncenters
attheAmphenolhomefacilityand
itssatellitefacilitiescreatevolume
runsthatarecosteffectiveand
meeton-timedeliverydemands.
AmphenoloperatesaQualitySys-
temthatisthird-partycertiedto
ISO-9001:2008andAS9100.
FormoreinformationonAmphenol
AerospacecapabilitiesinRectan-
gularproducts,oranyotherofthe
widerangeofconnectorproducts,
pleasecontactus:
AmphenolAerospaceOperations
40-60DelawareAvenue
Sidney,NY13838-1395
Phone:800-678-0141or
607-563-5011
www.amphenol-aerospace.com
Brush Contacts
Conventional Pin and Socket
Crimp Contacts
Bristle Brush Contacts
•Highdensityintighterspacing-amainconcernforintegratedelectronics.
•Asuperiorchoiceforboardlevelinterconnects.
Amphenol® B3
Bristle® Brush® Contact
Advantages:
Low Mating &
Unmating Forces
•Smooth,lowfriction
interfaces
• 70%to90%reductionin
mating/unmatingforces
fromconventional
pin-socketcontacts
• 1.5oz.maximumforcesper
contactpair(oneounce
typical)
• Easymating/unmating
makeshighcircuitcounts
practical(25lbs.typicalfor
400contacts)
• Mechanicalmatingaidsnot
required
• Noneedforexternalboard
supportstructuresforcon-
nectorsupto7incheslong.
Acentersupportisrecom-
mendedforMotherBoard
Connectorsover7inches.
Proven Durability and
Long Contact Life
•100,000matingcycles,
evenwhenhotswapped
• Documentedintermittency
freeperformance–
no10nanoseconddiscon-
tinuitiesduring50mcycles
of0.010displacement
• Overallcosteffectiveness
(reducedlifecyclecosts)
Multiple Points of Contact
Provide Superior
Electrical Capability
•14-70pointsofcontactper
matedcontact
• Stable,lowresistance–20
milliohmsmax.
• Redundantcurrentpaths
resultsinlowertotalresis-
tance
• Provenelectricalandgas
tightcontactsites
High Technology Machine Center
Brush Contact Machining
Table of Contents
LowMatingForceRectangularConnectorswithBrushContacts
Features,Peformance,Materials . . . . . . . . . . . . . . 1
SelectingtheCorrectMatedConnection,
FourBodyStyles ..................... 2
HowtoOrder
MilitaryandCommercial. . . . . . . . . . . . . . . . . 3-5
ConnectorRowandCavityIdentication,
ContactArrangements2Row . . . . . . . . . . . . . . . 6
ContactArrangements3and4Row . . . . . . . . . . . . . 7
MotherBoardConnector. . . . . . . . . . . . . . . . . 8-11
DaughterBoardConnector. . . . . . . . . . . . . . . 12-15
Input/OutputConnector . . . . . . . . . . . . . . . . 16-19
PCConnector. . . . . . . . . . . . . . . . . . . . 20-23
Accessories,PolarizationKeys . . . . . . . . . . . . . . . 24
Accessories,TestProbeKit . . . . . . . . . . . . . . . . 25
ConnectorInstallation/UserApplicationInformation. . . . .  26-29
SmallerSizedBrushConnectors-DesignFlexibility . . . . . 30,31
HybridCongurationswithContactOptions. . . . . . . . . . 32
HybridDesigns,SmallColor-CodedBrushConnectors. . . . . . 33
OtherBrushContactRectangularConnectors:
DockingConnectors . . . . . . . . . . . . . . . . . . . 34
HDB3HighDensityBrushConnectors............. 35
HSB3HighDensityBrushConnectors............. 36
RuggedizedRackandPanelConnectors. . . . . . . . . . . 37
LRM(LineReplaceableModule)Connectors. . . . . . . . . . 38
LRMHybridsandHighSpeedLRMGigastak&Digastak. . . . . 39
OtherRectangularConnectors:
TotalPackagingwithAmphenolPrintedCircuitBoards,
RectangularandCylindricalConnectors. . . . . . . . . . . . 40
AmphenolSalesOfceandDistributorListing . . . . . InsideBack
Notice:Specicationsaresubjecttochangewithoutnotice.ContactyournearestAmphenolCorporationSalesOfceforthelatestspecications.Allstate-
ments,informationanddatagivenhereinarebelievedtobeaccurateandreliablebutarepresentedwithoutguarantee,warranty,orresponsibilityofanykind
expressedorimplied.Statementsorsuggestionsconcerningpossibleuseofourproductsaremadewithoutrepresentationorwarrantythatanysuchuseis
freeofpatentinfringementandarenotrecommendationstoinfringeanypatent.Theusershouldnotassumethatallsafetymeasuresareindicatedorthat
othermeasuresmaynotberequired.Specicationsaretypicalandmaynotapplytoallconnectors.
©2010AmphenolCorp.PrintedbyDP5/2010
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial
Operations
Amphenol Commercial Air
40-60DelawareAvenue,
Sidney,NY13838-1395
Phone:607-563-5011 
1-800-678-0141
Fax:607-563-5157
www.amphenol-aerospace.com
www.amphenol-industrial.com
AmphenolCorporation
Amphenol Aerospace
2010CorporateRidge
McLean,VA22101
Phone:1-800-678-0141
OTHERAMPHENOLDIVISIONS
Amphenol Backplane Systems
18CelinaAvenue
Nashua,NH03063
Phone:888-318-3553
Fax:603-883-0171
Web:www.amphenol.abs.com
Amphenol Canada
605MilnerAve.
Toronto,OntarioM1B5X6
Phone:416-291-4401
Fax:416-292-0647
Web:www.amphenolcanada.com
Amphenol PCD
72CherryHillDrive
Beverly,MA01915
Phone:978-624-3400
Fax:978-927-1513
Web:www.amphenolpcd.com
E-mail:milaero@amphenolpcd.com
Amphenol Printed Circuits
91NortheasternBoulevard
Nashua,NH03062
Phone:603-324-4500
Fax:603-324-4717
Web:www.amphenol-tcs.com
SV Microwave
RFConnectors&Components,
anAmphenolCompany
2400CentreparkWestDrive,
Suite100
WestPalmBeach,FL33409
Phone:561-840-1800
Fax:561-844-8551
E-mail:sales@svmicro.com
Web:www.svmicrowave.com
Amphenol Nexus
50SunnysideAvenue
P.O.Box10177
Stamford,CT06904-2177
Phone:203-327-7300
Fax:203-324-7623
E-mail:salesinfo@nexus.com
Web:www.nexus.com
AUTHORIZEDDISTRIBUTORS
CorporateHeadquarters
AlphabeticalListing
ARROW ELECTRONICS
7459S.LimaStreet
Englewood,CO80112-5816
Phone:800-833-3557
Fax:800-562-3542
Web:www.arrow.com
AVNET
221147thStreet
Phoenix,AZ85034
Phone:800-332-8638
Web:www.avnet.com
PEI GENESIS
2180HornigRoad
Philadelphia,PA19116
Phone:800-523-0727
Fax:215-552-8022
Web:www.peigenesis.com
POWELL ELECTRONICS
200CommodoreDrive
LoganTownship,NJ08085
Phone:800-235-7880
Fax:215-937-4655
Web:www.powell.com
TTI INC.
2441NortheastPkwy.
FortWorth,TX76106
Phone:800-225-5884
Fax:817-740-9494
Web:www.ttiinc.com
NEWARK
4801N.Ravenswood
Chicago,IL60640-4496
Phone:800-463-9275
Web:www.newarkinone.com
SMALLDISADVANTAGED/
MINORITYDISTRIBUTORS
CHEROKEE NATION DISTRIBUTORS
Rt.3,Box498
Stilwell,OK74960
Phone:918-696-3151
Fax:918-696-3129
Web:www.cherokee-corp.com
JRH ELECTRONICS LLC
11001LincolnDriveWest
Marlton,NJ08053
Phone:800-467-8309
Fax:609-988-8728
Web:www.jrhelec.com
INTERNATIONAL
LatinAmerica
ARGENTINA
AmphenolArgentina
AvenidaCallao930
2ndoorOfceBPlaza
C1023AAPBuenosAires,Argentina
Phone:(5411)48156886
Fax:(5411)48145779
E-mail:www.@amphenol.com.ar
BRAZIL
AmphenoldoBrasilLtda.
RuaDiogoMoreira132
20Ander,Rooms2001-2-3
CEP05423-010
SaoPaulo-SP,Brazil
Phone:(55-11)3815.1003
Fax:(55-11)3815.1629
E-mail:vendas@amphenol.com.br
MEXICO
AmphenolMexico
ProlongacionReforma61-6B2
Col.PaseodelasLomas
C.P.01330MexicoD.F.,Mexico
Phone:(52-55)5258.9984
Fax:(52-55)5081.6890
E-mail:www@amphenolmexico.com
Europe
ENGLAND
AmphenolLimited
ThanetWay,Whitstable
KentCT53JF,UnitedKingdom
Phone:(44-1-227)773200
Fax:(44-1-227)276571
E-mail:info@amphenol.co.uk
FRANCE
AmphenolSocapex
Promenadedel’Arve,BP29
Thyez74311948Cedex,France
Phone:(33-4)50892800
Fax:(33-4)50962975
Web:www.amphenol-socapex.com
FRANCE
Amphenol-AirLB
29,Voied’YVois
F-08110Blagny,France
Phone:(33-3)2422-7849
Fax:(33-3)2422-1319
Web:www.amphenol-airlb.fr
GERMANY
Amphenol-AirLBGmbH
AmKleinbahnhof4
D-66740Saarlouis,Germany
Phone:(49-6831)981-00
Fax:(49-6831)9810-30
Web:www.amphenol-airlb.com
ITALY & REST OF EUROPE
AmphenolItaliaS.p.A.
ViaBarbaiana5
20020Lainate(Milano),Italy
Phone:39-02-932541
Fax:39-02-93254444
E-mail:info@amphenol-it.com
MiddleEast/Africa
ISRAEL
Bar-TecLtd.
3HagavishSt.,P.O.B.279
Kr-BarkanBldg.,EastIndustrialZone
KfarSava44102,Israel
Phone:(972-9)764.4100
Fax:(972-9)7674324
E-mail:sales@bar-tec.com
Web:www.bar-tec.com
SOUTH AFRICA
AmphenolSouthAfrica
30ImpalaRoad
2196Sandton-Chislehurston
SouthAfrica
Tel:(27-11)783-9517
Fax:(27-11)783-9519
E-mail:amphenol_africa@csi.com
Web:www.amphenol.co.za
TURKEY
AmphenolTurkiye
AyazagaMah.MeydanSk.No.28
BeybiGizPlaza,Kat.263496
Maslak/Istanabul
Phone:90(212)3352501
Fax:990(212)3352500
E-mail:saracoglu@amphenol.com.tr
Web:www.amphenol.com.tr
Asia/Pacic
AUSTRALIA
AmphenolAustraliaLTD
2FivewaysBlvd.Keysborough
Melbourne,Victoria3173Australia
Phone:61387968888
Fax:61387968801
E-mail:www.@amphenol.com.au
RUSSIA
AmphenolRussiaOfce
8YaroslavskajaStr.,
Floor2129164Moscow,Russia
Phone:74959376341
Fax:74959376319
E-mail:russia@amphenol.com
INDIA
AmphenolInterconnectIndiaPvt,Ltd.
105BhosariIndustrialArea
Pune,411026,India
Phone:(91-20)27120462
Fax:(91-20)27129158
E-mail:sales@amphenol-in.com
JAPAN
AmphenolJapanMil/Aero&Industrial
471-1,Deba,Ritto-city
Shiga520-3041,Japan
Phone:81-77-553-8501
Fax:81-77-551-2200
Pleasenotethat,inthefuture,thiscatalogwillbepartofAmphenol’sNew
CombinedRectangularInterconnectCatalog.CallAmphenolAerospacefor
moreinformationaboutthiscombinedcatalog,tobeavailableJan.2011.
Brush Contact Innovation
• Multiplecontactinterfaces-
Strandsofhightensilewireare
bundledtogethertoform
brush-likecontacts.Byinter-
meshingtwomulti-strandwire
bundles,anelectricalconnection
ismade.
• Providesredundantcurrent
paths,14-70(pointsofcontact)
permatedcontactwithagas
tightjunction
• Verysmooth(lowfriction)
interface
ConventionalPin/Socket
• Machinedsurfacenishon
bothparts
• Higherfrictionandwear
• Limitednumberofcontactsites
Amphenol’s High Technology
Machining and Computer Driven
Centers for Connector and
Contact Production
Brush vs. Conventional Contacts
AmphenolAerospace,locatedin
upstateNewYorkUSA,has
diversemanufacturingcapability
includingstateoftheartCNC
machining,die-casting,molding,
impactandextruding,screw
machiningandplating.
Alsowithinthisfacilityarecom-
pletedesignengineeringand
environmentaltestfacilities.
Hightechnologyproductioncenters
attheAmphenolhomefacilityand
itssatellitefacilitiescreatevolume
runsthatarecosteffectiveand
meeton-timedeliverydemands.
AmphenoloperatesaQualitySys-
temthatisthird-partycertiedto
ISO-9001:2008andAS9100.
FormoreinformationonAmphenol
AerospacecapabilitiesinRectan-
gularproducts,oranyotherofthe
widerangeofconnectorproducts,
pleasecontactus:
AmphenolAerospaceOperations
40-60DelawareAvenue
Sidney,NY13838-1395
Phone:800-678-0141or
607-563-5011
www.amphenol-aerospace.com
Brush Contacts
Conventional Pin and Socket
Crimp Contacts
Bristle Brush Contacts
•Highdensityintighterspacing-amainconcernforintegratedelectronics.
•Asuperiorchoiceforboardlevelinterconnects.
Amphenol® B3
Bristle® Brush® Contact
Advantages:
Low Mating &
Unmating Forces
•Smooth,lowfriction
interfaces
• 70%to90%reductionin
mating/unmatingforces
fromconventional
pin-socketcontacts
• 1.5oz.maximumforcesper
contactpair(oneounce
typical)
• Easymating/unmating
makeshighcircuitcounts
practical(25lbs.typicalfor
400contacts)
• Mechanicalmatingaidsnot
required
• Noneedforexternalboard
supportstructuresforcon-
nectorsupto7incheslong.
Acentersupportisrecom-
mendedforMotherBoard
Connectorsover7inches.
Proven Durability and
Long Contact Life
•100,000matingcycles,
evenwhenhotswapped
• Documentedintermittency
freeperformance–
no10nanoseconddiscon-
tinuitiesduring50mcycles
of0.010displacement
• Overallcosteffectiveness
(reducedlifecyclecosts)
Multiple Points of Contact
Provide Superior
Electrical Capability
•14-70pointsofcontactper
matedcontact
• Stable,lowresistance–20
milliohmsmax.
• Redundantcurrentpaths
resultsinlowertotalresis-
tance
• Provenelectricalandgas
tightcontactsites
High Technology Machine Center
Brush Contact Machining
Table of Contents
LowMatingForceRectangularConnectorswithBrushContacts
Features,Peformance,Materials . . . . . . . . . . . . . . 1
SelectingtheCorrectMatedConnection,
FourBodyStyles ..................... 2
HowtoOrder
MilitaryandCommercial. . . . . . . . . . . . . . . . . 3-5
ConnectorRowandCavityIdentication,
ContactArrangements2Row . . . . . . . . . . . . . . . 6
ContactArrangements3and4Row . . . . . . . . . . . . . 7
MotherBoardConnector. . . . . . . . . . . . . . . . . 8-11
DaughterBoardConnector. . . . . . . . . . . . . . . 12-15
Input/OutputConnector . . . . . . . . . . . . . . . . 16-19
PCConnector. . . . . . . . . . . . . . . . . . . . 20-23
Accessories,PolarizationKeys . . . . . . . . . . . . . . . 24
Accessories,TestProbeKit . . . . . . . . . . . . . . . . 25
ConnectorInstallation/UserApplicationInformation. . . . .  26-29
SmallerSizedBrushConnectors-DesignFlexibility . . . . . 30,31
HybridCongurationswithContactOptions. . . . . . . . . . 32
HybridDesigns,SmallColor-CodedBrushConnectors. . . . . . 33
OtherBrushContactRectangularConnectors:
DockingConnectors . . . . . . . . . . . . . . . . . . . 34
HDB3HighDensityBrushConnectors............. 35
HSB3HighDensityBrushConnectors............. 36
RuggedizedRackandPanelConnectors. . . . . . . . . . . 37
LRM(LineReplaceableModule)Connectors. . . . . . . . . . 38
LRMHybridsandHighSpeedLRMGigastak&Digastak. . . . . 39
OtherRectangularConnectors:
TotalPackagingwithAmphenolPrintedCircuitBoards,
RectangularandCylindricalConnectors. . . . . . . . . . . . 40
AmphenolSalesOfceandDistributorListing . . . . . InsideBack
Notice:Specicationsaresubjecttochangewithoutnotice.ContactyournearestAmphenolCorporationSalesOfceforthelatestspecications.Allstate-
ments,informationanddatagivenhereinarebelievedtobeaccurateandreliablebutarepresentedwithoutguarantee,warranty,orresponsibilityofanykind
expressedorimplied.Statementsorsuggestionsconcerningpossibleuseofourproductsaremadewithoutrepresentationorwarrantythatanysuchuseis
freeofpatentinfringementandarenotrecommendationstoinfringeanypatent.Theusershouldnotassumethatallsafetymeasuresareindicatedorthat
othermeasuresmaynotberequired.Specicationsaretypicalandmaynotapplytoallconnectors.
©2010AmphenolCorp.PrintedbyDP5/2010
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial
Operations
Amphenol Commercial Air
40-60DelawareAvenue,
Sidney,NY13838-1395
Phone:607-563-5011 
1-800-678-0141
Fax:607-563-5157
www.amphenol-aerospace.com
www.amphenol-industrial.com
AmphenolCorporation
Amphenol Aerospace
2010CorporateRidge
McLean,VA22101
Phone:1-800-678-0141
OTHERAMPHENOLDIVISIONS
Amphenol Backplane Systems
18CelinaAvenue
Nashua,NH03063
Phone:888-318-3553
Fax:603-883-0171
Web:www.amphenol.abs.com
Amphenol Canada
605MilnerAve.
Toronto,OntarioM1B5X6
Phone:416-291-4401
Fax:416-292-0647
Web:www.amphenolcanada.com
Amphenol PCD
72CherryHillDrive
Beverly,MA01915
Phone:978-624-3400
Fax:978-927-1513
Web:www.amphenolpcd.com
E-mail:milaero@amphenolpcd.com
Amphenol Printed Circuits
91NortheasternBoulevard
Nashua,NH03062
Phone:603-324-4500
Fax:603-324-4717
Web:www.amphenol-tcs.com
SV Microwave
RFConnectors&Components,
anAmphenolCompany
2400CentreparkWestDrive,
Suite100
WestPalmBeach,FL33409
Phone:561-840-1800
Fax:561-844-8551
E-mail:sales@svmicro.com
Web:www.svmicrowave.com
Amphenol Nexus
50SunnysideAvenue
P.O.Box10177
Stamford,CT06904-2177
Phone:203-327-7300
Fax:203-324-7623
E-mail:salesinfo@nexus.com
Web:www.nexus.com
AUTHORIZEDDISTRIBUTORS
CorporateHeadquarters
AlphabeticalListing
ARROW ELECTRONICS
7459S.LimaStreet
Englewood,CO80112-5816
Phone:800-833-3557
Fax:800-562-3542
Web:www.arrow.com
AVNET
221147thStreet
Phoenix,AZ85034
Phone:800-332-8638
Web:www.avnet.com
PEI GENESIS
2180HornigRoad
Philadelphia,PA19116
Phone:800-523-0727
Fax:215-552-8022
Web:www.peigenesis.com
POWELL ELECTRONICS
200CommodoreDrive
LoganTownship,NJ08085
Phone:800-235-7880
Fax:215-937-4655
Web:www.powell.com
TTI INC.
2441NortheastPkwy.
FortWorth,TX76106
Phone:800-225-5884
Fax:817-740-9494
Web:www.ttiinc.com
NEWARK
4801N.Ravenswood
Chicago,IL60640-4496
Phone:800-463-9275
Web:www.newarkinone.com
SMALLDISADVANTAGED/
MINORITYDISTRIBUTORS
CHEROKEE NATION DISTRIBUTORS
Rt.3,Box498
Stilwell,OK74960
Phone:918-696-3151
Fax:918-696-3129
Web:www.cherokee-corp.com
JRH ELECTRONICS LLC
11001LincolnDriveWest
Marlton,NJ08053
Phone:800-467-8309
Fax:609-988-8728
Web:www.jrhelec.com
INTERNATIONAL
LatinAmerica
ARGENTINA
AmphenolArgentina
AvenidaCallao930
2ndoorOfceBPlaza
C1023AAPBuenosAires,Argentina
Phone:(5411)48156886
Fax:(5411)48145779
E-mail:www.@amphenol.com.ar
BRAZIL
AmphenoldoBrasilLtda.
RuaDiogoMoreira132
20Ander,Rooms2001-2-3
CEP05423-010
SaoPaulo-SP,Brazil
Phone:(55-11)3815.1003
Fax:(55-11)3815.1629
E-mail:vendas@amphenol.com.br
MEXICO
AmphenolMexico
ProlongacionReforma61-6B2
Col.PaseodelasLomas
C.P.01330MexicoD.F.,Mexico
Phone:(52-55)5258.9984
Fax:(52-55)5081.6890
E-mail:www@amphenolmexico.com
Europe
ENGLAND
AmphenolLimited
ThanetWay,Whitstable
KentCT53JF,UnitedKingdom
Phone:(44-1-227)773200
Fax:(44-1-227)276571
E-mail:info@amphenol.co.uk
FRANCE
AmphenolSocapex
Promenadedel’Arve,BP29
Thyez74311948Cedex,France
Phone:(33-4)50892800
Fax:(33-4)50962975
Web:www.amphenol-socapex.com
FRANCE
Amphenol-AirLB
29,Voied’YVois
F-08110Blagny,France
Phone:(33-3)2422-7849
Fax:(33-3)2422-1319
Web:www.amphenol-airlb.fr
GERMANY
Amphenol-AirLBGmbH
AmKleinbahnhof4
D-66740Saarlouis,Germany
Phone:(49-6831)981-00
Fax:(49-6831)9810-30
Web:www.amphenol-airlb.com
ITALY & REST OF EUROPE
AmphenolItaliaS.p.A.
ViaBarbaiana5
20020Lainate(Milano),Italy
Phone:39-02-932541
Fax:39-02-93254444
E-mail:info@amphenol-it.com
MiddleEast/Africa
ISRAEL
Bar-TecLtd.
3HagavishSt.,P.O.B.279
Kr-BarkanBldg.,EastIndustrialZone
KfarSava44102,Israel
Phone:(972-9)764.4100
Fax:(972-9)7674324
E-mail:sales@bar-tec.com
Web:www.bar-tec.com
SOUTH AFRICA
AmphenolSouthAfrica
30ImpalaRoad
2196Sandton-Chislehurston
SouthAfrica
Tel:(27-11)783-9517
Fax:(27-11)783-9519
E-mail:amphenol_africa@csi.com
Web:www.amphenol.co.za
TURKEY
AmphenolTurkiye
AyazagaMah.MeydanSk.No.28
BeybiGizPlaza,Kat.263496
Maslak/Istanabul
Phone:90(212)3352501
Fax:990(212)3352500
E-mail:saracoglu@amphenol.com.tr
Web:www.amphenol.com.tr
Asia/Pacic
AUSTRALIA
AmphenolAustraliaLTD
2FivewaysBlvd.Keysborough
Melbourne,Victoria3173Australia
Phone:61387968888
Fax:61387968801
E-mail:www.@amphenol.com.au
RUSSIA
AmphenolRussiaOfce
8YaroslavskajaStr.,
Floor2129164Moscow,Russia
Phone:74959376341
Fax:74959376319
E-mail:russia@amphenol.com
INDIA
AmphenolInterconnectIndiaPvt,Ltd.
105BhosariIndustrialArea
Pune,411026,India
Phone:(91-20)27120462
Fax:(91-20)27129158
E-mail:sales@amphenol-in.com
JAPAN
AmphenolJapanMil/Aero&Industrial
471-1,Deba,Ritto-city
Shiga520-3041,Japan
Phone:81-77-553-8501
Fax:81-77-551-2200
Pleasenotethat,inthefuture,thiscatalogwillbepartofAmphenol’sNew
CombinedRectangularInterconnectCatalog.CallAmphenolAerospacefor
moreinformationaboutthiscombinedcatalog,tobeavailableJan.2011.
1
Amphenol Low Mating Force
Rectangular Connectors
MIL-DTL-55302 (M55302/166 thru /172)
Amphenol’s Low Mating Force Connectors are well known in the connector arena – with proven performance on the
ground, in the air, and at sea. – In service for over 25 years, with over 50 million brush contacts elded; and qualied for
use on M1A2 Abrams, F-16 Falcon, F/A-22 Raptor, F-35 Lightning II, AIM-132 ASRAAM and many more applications.
Four Standard Body Styles
Key Connector Features
0.100 inch center to center, square grid contact spacing•
Application exibility (parallel boards, perpendicular boards, wire to •
board, end to end boards, card extenders
2, 3 and 4 row contact arrangements with 10 to 100 contacts per row •in one contact per row increments
Military versions meet MIL-DTL-55302/166 through /172•
Termination versatility; straight & 90° PCB stud, wire wrap & crimp• Options on termination lengths and plating•
Front release/front removable contacts in Mother Board, Daughter •
Board and PC version; rear release/rear removable crimp contacts
(size 22D) or printed circuit board pins provided with Input/Output
connectors
Accessories available for latching and polarization• Up to 256 keyed, mating polarizations available•
Hybrids available – mix signal with power, RF or ber optics• Smaller sized connector designs with as few as 5 contacts per row• RoHS compliant versions are available, consult •Amphenol Aerospace for more information
Performance
voltage rating: •SL 70,000 ft.
1300 325
one and one-half ounce max. average contact engaging/ •separating forces
7 million average contact resistance for row A contacts • (Resistance will vary depending on the point of measurement and the •length of the contact.)
3 ampere – PCB contacts; 5 ampere – wire wrap / crimp contacts•
–65°C to +125°C temperature rating• 5 gigaohms minimum insulation resistance•
Materials
Connector Body – Glass-lled thermoplastic molding material in •
accordance with MIL-M-24519 type GPT-15F and/or Grade B,
Class 15 of MIL-P-46161 (UL94V-O)•
Polarization Keys – Glass-lled acetal plastic molding material in •
accordance with MIL-P-46137
Locking Screw/Mounting Bushing – Corrosion resistant steel AISI •
300 types passivated in accordance with QQ-P-35
Contacts
Holders – Copper alloy in accordance with Federal Specication •
QQ-B-626 or SAE J463
Wire – Berryllium copper in accordance with Federal Specication •
ASTM B197
Sleeves – If applicable, stainless steel in accordance with •
AMS-5514 passivated in accordance with ASTM A967 1
Unmated Input/Output and PC Connector
An Input/Output and Mother Board Connector
Mated Mother Board and Daughter Board Connector
Mother Board
Daughter Board
Input/Output
PC (“Right Angle Mother Board”,
“Card Extender”)
2
STANDARD FOUR BODY STYLES
Mother Board Connector (MB)
also can be referred to as a “Back-
plane” Connector
Straight PCB stud or Wire wrap • termination
Mates with: Daughter board or •I/O
connectors
Daughter Board Connector (DB)
also can be referred to as a “Module
Connector”
90° PCB stud•
Mates with: Mother board or PC • connectors
Printed Circuit Connector (PC)
also can be referred to as a “Right
Angle Mother board Connector or a
”Card Extender Connector”
90° PCB stud• Mates with: •I/O or Daughter board
connectors
Input/Output Connector (I/O)
also can be referred to as a “Cable
Connector”
•I/O-C has rear removable crimp
contacts
•I/O-P has round PCB stud solder
contacts
Mates with: Mother board or PC • connectors
DB to MB
MB to I/O-C
MB to I/O-P
PC to DB PC to I/O-C
Mating Boards at Right Angles
Discrete Wires to PCB
Mating Parallel Boards
Mating Boards End to End Discrete Wires to PCB
2
Low Mating Force Rectangular Connectors
selecting the correct mated connection
PC I/O-C
PRINTED CIRCUIT
BOARD
BRUSH
CONNECTORS
INDIVIDUAL
WIRES
PRINTED CIRCUIT
BOARDS
BRUSH
CONNECTORS
DB PC
BRUSH
CONNECTORS
INDIVIDUAL
WIRES
PRINTED
CIRCUIT
BOARD
MB
I/O-C
BRUSH
CONNECTORS PRINTED
CIRCUIT
BOARDS
MB
I/O-P
PRINTED
CIRCUIT
BOARDS
BRUSH
CONNECTORS
MB
DB
3
MB, DB, PC Connectors
Military Part Number Ordering Procedure
Example part number M55302/166A10X1 is shown as follows:
M55302 /166 A 10 X 1
Body Type/
Contact Style
Number of Rows
Number of Contacts per Row
Tail Length
Tail Finish
Body Type/Contact Style
/166 designates MB-P (Mother Board, Printed Circuit Board
Termination)
/167 designates MB-W (Mother Board, Wire-wrap Contacts)
/168 designates PC (Printed Circuit, 90° Printed Circuit Board
Termination)
/170 designates DB (Daughter Board, 90° Printed Circuit Board
Termination)
Number of Rows
A – 2 Rows
B – 3 Rows
C – 4 Rows
Number of Contacts per Row
Contact counts per row range from 10 to 100
(Only 2 digits permitted in this space; for 100 contacts per row, use 00)
Tail Length
MB-P
(PCB Termination)*
MB-W**
(Wire-wrap)
W – .222 ±.025
X – .300 ±.025
Y – .145 ±.025
Z – .113 ±.025
Y – .700 ±.025
Z – .542 ±.025
DB* PC*
X – .300 ±.025
Y – .150 ±.025
Z – .120 ±.025
Y – .150
Z – .095
* Reference “J” Dimension on all connector drawings in this catalog.
** For MB-W only: Reference “H” Dimension on connector drawing on page 8.
Tail Finish
1 Tin lead per MIL-P-81728, 50 to 70% tin, .0001 min. thick
over copper
2 Gold per MIL-G-45204, type II, grade C, class 00
(01 for MB-W) over nickel per QQ-N-290
IO Connectors
Military Part Number Ordering Procedure
Example part number M55302/169A101 is shown as follows:
M55302 /169 A 10 1
Body Type
Number of Rows
Number of Contacts per Row
Contact Type/Finish
Body Type
/169 designates IO (Input/Output)
(Contact type/nish is last digit of IO part number - see list
of options below)
Number of Rows
A – 2 Rows
B – 3 Rows
C – 4 Rows
Number of Contacts per Row
Contact counts per row range from 10 to 100
(Only 2 digits permitted in this space; for 100 contacts per row, use 00)
Contact Type/Finish
1 Crimp contact – Tin lead per MIL-P-81728, 50 to 70% tin,
.0001 min. thick over copper
2 Crimp contact – Gold per MIL-G-45204, type II, grade C,
class 1 over copper
3 Connectors supplied less contacts
4 PCB contacts installed with .145 ±.025 stickout – Tin lead
per MIL-P-81728, 50 to 70% tin, .0001 min. thick over
copper (Reference “J” Dimension on connector drawing on
page 16).
To Order IO Contacts
(For use with connectors less contacts)
M55302/171-1
sufx designates crimp well nish
Crimp well nish
1 Crimp contact – Tin lead per MIL-P-81728, 50 to 70% tin,
.0001 min. thick over copper
2 Crimp contact – Gold per MIL-G-45204, type II, grade C
class 1 over copper
To order Accessories, see page 5.
Low Mating Force Rectangular Connectors
how to order (military types)
+.035
–.025
+.035
–.025
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
4
MB, DB, I/O, PC Connectors
Proprietary Part Number Ordering Procedure
Example part number MB2-120P- ( ) is shown as follows:
MB 2 - 120 P - ( )
Body Type
Number of Rows
Total Number of Contacts
Termination Style
Variation Sufx
Body Type
MB designates Mother Board
DB designates Daughter Board
I/O designates Input/Output
PC designates Printed Circuit
Number of Rows
2, 3 or 4 rows
Total Number of Contacts
See Contact Arrangements, pages 8 and 9
Standard Termination Style
(Stickout values below apply to “J” dimension referenced on
individual connector catalog pages).
Variation Sufx
(Stickout values below apply to “J” dimension referenced
on individual connector catalog pages.)
Low Mating Force Rectangular Connectors
how to order (commercial types)
MBX-XXXP Straight PCB stud, .021 dia, .113 ±.025
stick out, Sn/Ni plate
MBX-XXXW Solderless wrap, .025 sq., .507 ±.025
stickout, Sn/Ni plate
DBX-XXXP 90° PCB stud, .021 dia, .085 ±.025 stickout,
Sn/Ni plate
IOX-XXXC Crimp, rear removable contact, size 22D wire
well, Sn/Ni plate
IOX-XXXP PCB stud, .021 dia, .145 ±.025 stickout,
Sn/Ni plate
PCX-XXXP 90° PCB stud, .021 dia., .095 stickout
Sn/Ni plate
(700) Gold plate in accordance with MIL-G-45204, type
II, .000030 min. thick gold (.000050 for solderless wrap)
over .000050 min. thick nickel (standard
termination length)
(701) Gold plate in accordance with MIL-G-45204, type
II, .000050 min. thick gold over .00015 min. thick
copper (standard termination length)
(702) PCB stud stickout of .145, Sn/Ni plate, MB-P
(703) Au/Ni [same as (700)], PCB stud stickout of .145, MB-P
(704) Au/Cu [same as (701)], PCB stud stickout of .145, MB-P
(705) 90° PCB stud, .120 stickout. Sn/Ni plate, DB
(706) Au/Ni [same as (700)], 90° PCB stud .120 stickout, DB
(707) Au/Cu [same as (701)], 90° PCB .120 stickout, DB
(709) PCB stud stickout of .300 DB (90°), .300 MB-P &
.335 IO-P, Sn/Ni plate
(710) Solderless wrap, .025 sq., .665 stickout, Sn/Ni plate,
MB-W
(711) Solderless wrap, .025 sq., .665 stickout, Au/Ni,
[same as (700)], MB-W
(713) PCB stud stickout of .060, Sn/Ni plate, IO-P
(714) 90° PCB stud stickout of .150, Sn/Ni plate, PC & DB
(715) Solderless wrap, .025 sq., .665 stickout, Au/Cu
[same as (701)], MB-W
(716) 90° PCB stud stickout of .085 matte tin, DB
(717) 90° PCB stud stickout of .095 matte tin, PC
(718) 90° PCB stud stickout of .120 matte tin, DB
(719) PCB stud stickout of .300 MB-P & .335 IO-P, matte tin
(720) PCB stud stickout of .060 matte tin, IO-P
(721) PCB stud stickout of .500, Sn/Ni plate, IO-P
(722) PCB stud stickout of .356 matte tin, MB-P
(723) PCB stud stickout of .192, Sn/Ni plate, MB-P
(724) 90° PCB stud stickout of .095, RTV potted rear,
Sn/Ni plate, PC
(725) 90° PCB stud stickout of .120, RTV potted rear,
Sn/Ni plate, DB
(726) 90° PCB stud stickout of .150, RTV potted rear,
Sn/Ni plate, PC & DB
(727) PCB stud stickout of .145, RTV potted rear,
Sn/Ni plate, MB-P
(728) PCB stud stickout of .145, Au/Ni, [same as (700)],
RTV potted rear, MB-P
(729) 90° PCB stud stickout of .120, Au/Ni, [same as (700)],
RTV potted rear, DB
(730) 90° PCB stud stickout of .150, Au/Ni, [same as (700)
above], PC and DB
(731) PCB stud stickout of .145, matte tin, MB-P
Variation Sufxes continued on next page.
+.035
–.025
LEGEND:
Sn/Ni designates Tin over Nickel
Au/Ni designates Gold over Nickel
Au/Cu designates Gold over Copper
SnPb/Cu designates Tin-Lead over Copper
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
5
MB, DB, I/O, PC Connectors
Proprietary Part Number Ordering Procedure
Variation Sufx, cont.
(750) PCB stud stickout of .172 termination, Au/Ni, [same as
(700)], RTV potted rear, MB-P
(751) 90° PCB stud stickout of .150, Sn/Ni, epoxy potted rear,
PC
(752) Au/Ni, epoxy potted rear, standard termination length
(753) Solderless wrap .025 sq.; .665 stickout, Au/Ni, [same
as (700)], epoxy potted rear, MB-W
(754) PCB stud stickout of .172 termination, SnPb/Cu
(MIL-Spec), MB-P
(757) PCB stud, .391 stickout, matte tin, MB-P
(758) PCB stud, .172 stickout, Au/Ni, [same as (700)], epoxy
potted rear, MB-P
(760) PCB stud, .192 stickout, Au/Ni (Mil-Spec), MB-P
(761) 90° PCB stud, .120 stickout, Sn/Ni, epoxy potted rear,
DB
(762) PCB stud, .145 stickout, Au/Ni (Mil-Spec), epoxy pot ted
rear, MB-P
(763) PCB stud, .145 stickout, SnPb/Cu (Mil-Spec), epoxy
potted rear, MB-P
(764) 90° PCB stud, .150 stickout, SnPb/Cu (Mil-Spec),
epoxy potted rear, DB & PC
(765) PCB stud, stickout of .300 DB (90°), .300 MB-P, SnPb/
Cu (Mil-Spec), epoxy potted rear
(766) 90° PCB stud, .120 stickout, Au/Ni (Mil-Spec), epoxy
potted rear, DB
(767) PCB stud, .192 stickout, Au/Ni (Mil-Spec), epoxy pot ted
rear, MB-P
(768) PCB stud, .172 stickout, Au/Ni (Mil-Spec), MB-P
(769) 90° PCB stud, .200 stickout, Au/Ni (Mil-Spec), DB
(770) 90° PCB stud, .260 stickout, Au/Ni (Mil-Spec), DB
(773) 90° PCB stud, .150 stickout, Au/Ni (Mil-Spec), RTV
potted rear, PC & DB
Accessories
Amphenol® Low Mating Force Connectors are shipped less accessory items.
Accessories may be ordered by either military or proprietary part numbers shown below:
Accessory Item Series Military Part Number Proprietary Part Number Qty. Required
Polarization Keys MB, DB, IO, PC M55302/78-02 10-285422-2 4*
Locking/Mounting Bushing MB M55302/172-01 10-411196-3 2
Alternate Length Bushing (Longer) MB M55302/172-02 10-411196-5 2
Locking Bushing PC M55302/172-05 10-411196-4 2
Locking Screw, Plain IO M55302/172-04 10-502599 2
Locking Screw, Slotted IO -10-502599-1 2
Locking Screw, Slotted (Low Prole) IO M55302/172-03 10-502599-2 2
Test Probe Kit MB, DB, IO, PC - 11-10400-22 1**
See pages 24-29 for more detailed information on these accessory items and how
they are assembled into connectors.
* 4 Keys required per connector half, if used
** One kit per connector gender is recommended
Low Mating Force Rectangular Connectors
how to order (commercial types)/accessories
(732) PCB stud stickout of .300 DB (90°), .300 MB-P and
.335 IO-P, Au/Cu [same as (701)],
(733) PCB stud stickout of .421, matte tin, MB-P
(734) Solderless wrap .025 sq.; .665 stickout, Au/Ni, [same
as (700)], RTV potted rear, MB-W
(735) RTV potted rear, standard termination length, Au/Ni,
[same as (700)]
(736) RTV potted rear, standard termination length, Sn/Ni
[use (724) for PC]
(737) PCB stud stickout of .300 DB (90°), .300 MB-P and
.335 IO-P, Au/Ni, [same as (700)], RTV potted rear
(738) PCB stud stickout of .192 SnPb/Cu (Mil-Spec), MB-P
(739) PCB stud stickout of .300 DB (90°), .300 MB-P and
.335 IO-P;, RTV potted rear, Sn/Ni
(740) Solderless wrap .025 sq.; .665 stickout, Sn/Ni,
RTV potted rear, MB-W
(741) Solderless wrap .025 sq.; .280 stickout, Au/Ni, [same
as (700)], MB-W
(742) PCB .145, Au/Ni, [same as (700)], epoxy potted rear,
MB-P
(743) 90° PCB .120, Au/Ni, [same as (700)], epoxy potted
rear, DB
(744) 90° PCB .120, Au/Ni, [same as (700)], (MIL-Spec),
epoxy potted rear, DB
(746) 90° PCB .120, SnPb/Cu, (MIL-Spec), epoxy potted
rear, DB
(747) PCB stud stickout of .200, Sn/Ni, IO-P
(748) PCB stud stickout of .145, Sn/Ni, epoxy potted rear,
MB-P
(749) PCB, epoxy potted rear, standard termination length,
Sn/Ni
6
Contacts
Contacts are supplied with MB, DB, IO and PC Connector Series assem blies as ordered.
Low Mating Force Rectangular Connectors
connector row and cavity identication,
contact arrangements
Front of
Mother Board
Connector,
Rear of
Input/Output
Connector,
Front of
Printed Circuit
Connector
Designates Basic Dimension.
Consult Amphenol drawing for solderless wrap contact xturing
(datum) hole locations to facilitate connector alignment.
Rear of 90°
Daughter Board
Connector,
Daughter Board
Hole Pattern
at F
Rear of 90°
Printed Circuit
Connector,
Hole Pattern
at G
2 ROW
10 per Row
Total
Contacts AA
20 .900
30 1.400
40 1.900
50 2.400
60 2.900
70 3.400
80 3.900
90 4.400
100 4.900
110 5.400
120 5.900
130 6.400
140 6.900
150 7.400
160 7.900
170 8.400
180 8.900
190 9.400
200 9.900
2 ROW
BRUSH CONNECTOR ROW AND CAVITY
IDENTIFICATION
Contact rows and cavities are identied with molded-in
letters and numbers respectively and, depending on the
connector style, are located either on the front, rear or
both faces of the connector. See illustration at right.
Note: The brand name of Bendix may appear molded-in on
connectors. As manufacturing molds are remade, the correct
Amphenol name will replace the former Bendix name.
As shown in the second illustration at right, row identica-
tion is always at the radius end and begins with Row “A”.
Contact cavity identication always starts at radius end
and begins with cavity #6 and then every fth cavity
thereafter, except for arrangements consisting of 10
contacts per row, which lack numerals. Up to every 9
contact locations at the high numeral end of the contact
row will not be identied.
Mother Board and PC Connectors
Contact rows are identied on the front and rear faces.
Contact cavities are identied on the rear face.
Daughter Board Connectors
Contact rows and cavities are identied on the front face.
Input/Output Connectors
Contact rows and cavities are identied on the rear face.
A
B
C
D
61116212631
CONTACT ROWS AND CAVITIES ARE IDENTIFIED WITH MOLDED-IN
LETTERS AND NUMBERS (FRONT FACE OF DAUGHTER BOARD SHOWN)
IDENTIFICATION STARTS AT THE RADIUS END OF THE CONNECTOR
CIRCUIT
BOARD
DAUGHTER
BOARD
CONNECTOR
CONTACT B1
CONTACT C1
CONTACT A1
(STARTING POINT
OF IDENTIFICATION)
RADIUS END
OF CONNECTOR
ROW C
ROW B
ROW A
ROW A
ROW B
ROW C
2 PLACES
.5375
.050 .100 TYP
B
A1
1
AA
.100
MOUNTING FEATURE
2 PLACES
2 PLACES
.5375
.200 TYP
.100 TYP
A1
B1
AA
.100
MOUNTING
FEATURE
2 PLACES
G
2 PLACES
.100 TYP
B1
A1
AA
.100
MOUNTING FEATURE
2 PLACES
F
.225
7
Front of
Mother Board
Connector,
Rear of
Input/Output
Connector,
Front of
Printed Circuit
Connector
3 ROW
10 per Row
Total
Contacts AA
30 .900
45 1.400
60 1.900
75 2.400
90 2.900
105 3.400
120 3.900
135 4.400
150 4.900
165 5.400
180 5.900
195 6.400
210 6.900
225 7.400
240 7.900
255 8.400
270 8.900
285 9.400
300 9.900
Low Mating Force Rectangular Connectors
contact arrangements, cont.
Rear of 90°
Daughter Board
Connector,
Daughter Board
Hole Pattern
at F
Rear of 90°
Printed Circuit
Connector,
Hole Pattern
at G
Front of
Mother Board
Connector,
Rear of
Input/Output
Connector,
Front of
Printed Circuit
Connector
Rear of 90°
Daughter Board
Connector,
Daughter Board
Hole Pattern
at F
Rear of 90°
Printed Circuit
Connector,
Hole Pattern
at G
Designates Basic Dimension.
Consult Amphenol drawing for solderless wrap contact xturing (datum)
hole loca tions to facilitate connector alignment.
4 ROW
10 Per Row
Total
Contacts AA
40 .900
60 1.400
80 1.900
100 2.400
120 2.900
140 3.400
160 3.900
180 4.400
200 4.900
220 5.400
240 5.900
260 6.400
280 6.900
300 7.400
320 7.900
340 8.400
360 8.900
380 9.400
400 9.900
3 ROW4 ROW
2 PLACES
.5375
.100 .100 TYP
B
A1
1
C1
AA
.100 TYP
MOUNTING FEATURE
2 PLACES
TYP
2 PLACES
.5375
.150 .100 TYP
D
C
B
A
1
1
1
1
AA
.100 TYP
MOUNTING FEATURE
2 PLACES
2 PLACES
.100 TYP
C1
B1
A1
AA
.100
MOUNTING FEATURE
2 PLACES
F.100 TYP
.225 TYP
2 PLACES
.5375
.200 TYP
.100 TYP
A1
B1
C1
AA
.100 TYP
MOUNTING
FEATURE
2 PLACES
G
2 PLACES
.100 TYP
D1
C1
B1
A1
AA
.100
MOUNTING FEATURE
2 PLACES
F.100 TYP
.225
2 PLACES
.5375
.200 TYP
.100 TYP
A1
B1
C1
D1
AA
.100 TYP
MOUNTING
FEATURE
2 PLACES
G
8
Low Mating Force
mother board connector
MATES WITH DB AND IO SERIES CONNECTORS
Notes:
When mating with DB connector, a total of .035 inch minimum radial pilot
is available for connector body alignment.
All dimensions for reference only.
Polarization keys are not supplied as part of MB Connector Series
assemblies. See Accessories How to Order, page 5 and further
description, page 24.
** Locking/mounting bushings are not supplied as part of MB Connector
Series assemblies. See Accessories How to Order, page 5 and further
description on page 27.
Designates Basic Dimension
Consult Amphenol drawing for solderless wrap contact xturing (datum)
hole locations to facilitate connector alignment.
Contact Data
Description Termination
Style
Letter
H
±.020 J
±.020 K
±.002
Round PCB
Stud Solder
Termination
P.148 .113 .021 Dia.
P-(702) .180 .145 .021 Dia.
P-(709) .335 .300 .021 Dia.
Square
Solder less Wrap
Termination
W .542 .507 .025 Sq.
W-(710) .700 .665 .025 Sq.
NOTE: Other variations available - see pages 4 and 5, or
consult Amphenol Aerospace.
A
B
C
.122
2 PLACES
+.005
–.000
.010 M
-D-
HJ
-X-
G
K
.365 +.002
–.007
.193 MAX
.020 MD M MINUS .010X
4-40
UNC-2B
4-40
UNC-2A
.365
.200 ±.025
ALTERNATE LENGTH (10-411196-5)
.350 ±.025
LOCKING/MOUNTING BUSHING (10-411196-3)
FOR MATING WITH INPUT/OUTPUT CONNECTOR,
ACCESSORY ITEM**
(See page 27 for alternate mounting variations
for Mother Board Connectors).
9
Number
of
Contacts MB
Number* A
Max.
B C
Max.
G
Min.
112 MB2-112(*) 6.895 6.575 .390 5.640
114 MB2-114(*) 6.995 6.675 .390 5.740
116 MB2-116(*) 7.095 6.775 .390 5.840
118 MB2-118(*) 7.195 6.875 .390 5.940
120 MB2-120(*) 7.295 6.975 .390 6.040
122 MB2-122(*) 7.395 7.075 .390 6.140
124 MB2-124(*) 7.495 7.175 .390 6.240
126 MB2-126(*) 7.595 7.275 .390 6.340
128 MB2-128(*) 7.695 7.375 .390 6.440
130 MB2-130(*) 7.795 7.475 .390 6.540
132 MB2-132(*) 7.895 7.575 .390 6.640
134 MB2-134(*) 7.995 7.675 .390 6.740
136 MB2-136(*) 8.095 7.775 .390 6.840
138 MB2-138(*) 8.195 7.875 .390 6.940
140 MB2-140(*) 8.295 7.975 .390 7.040
142 MB2-142(*) 8.395 8.075 .390 7.140
144 MB2-144(*) 8.495 8.175 .390 7.240
146 MB2-146(*) 8.595 8.275 .390 7.340
148 MB2-148(*) 8.695 8.375 .390 7.440
150 MB2-150(*) 8.795 8.475 .390 7.540
152 MB2-152(*) 8.895 8.575 .390 7.640
154 MB2-154(*) 8.995 8.675 .390 7.740
156 MB2-156(*) 9.095 8.775 .390 7.840
158 MB2-158(*) 9.195 8.875 .390 7.940
160 MB2-160(*) 9.295 8.975 .390 8.040
162 MB2-162(*) 9.395 9.075 .390 8.140
164 MB2-164(*) 9.495 9.175 .390 8.240
166 MB2-166(*) 9.595 9.275 .390 8.340
168 MB2-168(*) 9.695 9.375 .390 8.440
170 MB2-170(*) 9.795 9.475 .390 8.540
172 MB2-172(*) 9.895 9.575 .390 8.640
174 MB2-174(*) 9.995 9.675 .390 8.740
176 MB2-176(*) 10.095 9.775 .390 8.840
178 MB2-178(*) 10.195 9.875 .390 8.940
180 MB2-180(*) 10.295 9.975 .390 9.040
182 MB2-182(*) 10.395 10.075 .390 9.140
184 MB2-184(*) 10.495 10.175 .390 9.240
186 MB2-186(*) 10.595 10.275 .390 9.340
188 MB2-188(*) 10.695 10.375 .390 9.440
190 MB2-190(*) 10.795 10.475 .390 9.540
192 MB2-192(*) 10.895 10.575 .390 9.640
194 MB2-194(*) 10.995 10.675 .390 9.740
196 MB2-196(*) 11.095 10.775 .390 9.840
198 MB2-198(*) 11.195 10.875 .390 9.940
200 MB2-200(*) 11.295 10.975 .390 10.040
*See How to Order, pages 3, 4 and 5.
Number
of
Contacts MB
Number* A
Max.
B C
Max.
G
Min.
020 MB2-020(*) 2.295 1.975 .390 1.040
022 MB2-022(*) 2.395 2.075 .390 1.140
024 MB2-024(*) 2.495 2.175 .390 1.240
026 MB2-026(*) 2.595 2.275 .390 1.340
028 MB2-028(*) 2.695 2.375 .390 1.440
030 MB2-030(*) 2.795 2.475 .390 1.540
032 MB2-032(*) 2.895 2.575 .390 1.640
034 MB2-034(*) 2.995 2.675 .390 1.740
036 MB2-036(*) 3.095 2.775 .390 1.840
038 MB2-038(*) 3.195 2.875 .390 1.940
040 MB2-040(*) 3.295 2.975 .390 2.040
042 MB2-042(*) 3.395 3.075 .390 2.140
044 MB2-044(*) 3.495 3.175 .390 2.240
046 MB2-046(*) 3.595 3.275 .390 2.340
048 MB2-048(*) 3.695 3.375 .390 2.440
050 MB2-050(*) 3.795 3.475 .390 2.540
052 MB2-052(*) 3.895 3.575 .390 2.640
054 MB2-054(*) 3.995 3.675 .390 2.740
056 MB2-056(*) 4.095 3.775 .390 2.840
058 MB2-058(*) 4.195 3.875 .390 2.940
060 MB2-060(*) 4.295 3.975 .390 3.040
062 MB2-062(*) 4.395 4.075 .390 3.140
064 MB2-064(*) 4.495 4.175 .390 3.240
066 MB2-066(*) 4.595 4.275 .390 3.340
068 MB2-068(*) 4.695 4.375 .390 3.440
070 MB2-070(*) 4.795 4.475 .390 3.540
072 MB2-072(*) 4.895 4.575 .390 3.640
074 MB2-074(*) 4.995 4.675 .390 3.740
076 MB2-076(*) 5.095 4.775 .390 3.840
078 MB2-078(*) 5.195 4.875 .390 3.940
080 MB2-080(*) 5.295 4.975 .390 4.040
082 MB2-082(*) 5.395 5.075 .390 4.140
084 MB2-084(*) 5.495 5.175 .390 4.240
086 MB2-086(*) 5.595 5.275 .390 4.340
088 MB2-088(*) 5.695 5.375 .390 4.440
090 MB2-090(*) 5.795 5.475 .390 4.540
092 MB2-092(*) 5.895 5.575 .390 4.640
094 MB2-094(*) 5.995 5.675 .390 4.740
096 MB2-096(*) 6.095 5.775 .390 4.840
098 MB2-098(*) 6.195 5.875 .390 4.940
100 MB2-100(*) 6.295 5.975 .390 5.040
102 MB2-102(*) 6.395 6.075 .390 5.140
104 MB2-104(*) 6.495 6.175 .390 5.240
106 MB2-106(*) 6.595 6.275 .390 5.340
108 MB2-108(*) 6.695 6.375 .390 5.440
110 MB2-110(*) 6.795 6.475 .390 5.540
Low Mating Force
mother board connector
2 row contact arrangements
10
Number
of
Contacts MB
Number* A
Max.
B C
Max.
G
Min.
030 MB3-030(*) 2.295 1.975 .490 1.040
033 MB3-033(*) 2.395 2.075 .490 1.140
036 MB3-036(*) 2.495 2.175 .490 1.240
039 MB3-039(*) 2.595 2.275 .490 1.340
042 MB3-042(*) 2.695 2.375 .490 1.440
045 MB3-045(*) 2.795 2.475 .490 1.540
048 MB3-048(*) 2.895 2.575 .490 1.640
051 MB3-051(*) 2.995 2.675 .490 1.740
054 MB3-054(*) 3.095 2.775 .490 1.840
057 MB3-057(*) 3.195 2.875 .490 1.940
060 MB3-060(*) 3.295 2.975 .490 2.040
063 MB3-063(*) 3.395 3.075 .490 2.140
066 MB3-066(*) 3.495 3.175 .490 2.240
069 MB3-069(*) 3.595 3.275 .490 2.340
072 MB3-072(*) 3.695 3.375 .490 2.440
075 MB3-075(*) 3.795 3.475 .490 2.540
078 MB3-078(*) 3.895 3.575 .490 2.640
081 MB3-081(*) 3.995 3.675 .490 2.740
084 MB3-084(*) 4.095 3.775 .490 2.840
087 MB3-087(*) 4.195 3.875 .490 2.940
090 MB3-090(*) 4.295 3.975 .490 3.040
093 MB3-093(*) 4.395 4.075 .490 3.140
096 MB3-096(*) 4.495 4.175 .490 3.240
099 MB3-099(*) 4.595 4.275 .490 3.340
102 MB3-102(*) 4.695 4.375 .490 3.440
105 MB3-105(*) 4.795 4.475 .490 3.540
108 MB3-108(*) 4.895 4.575 .490 3.640
111 MB3-111(*) 4.995 4.675 .490 3.740
114 MB3-114(*) 5.095 4.775 .490 3.840
117 MB3-117(*) 5.195 4.875 .490 3.940
120 MB3-120(*) 5.295 4.975 .490 4.040
123 MB3-123(*) 5.395 5.075 .490 4.140
126 MB3-126(*) 5.495 5.175 .490 4.240
129 MB3-129(*) 5.595 5.275 .490 4.340
132 MB3-132(*) 5.695 5.375 .490 4.440
135 MB3-135(*) 5.795 5.475 .490 4.540
138 MB3-138(*) 5.895 5.575 .490 4.640
141 MB3-141(*) 5.995 5.675 .490 4.740
144 MB3-144(*) 6.095 5.775 .490 4.840
147 MB3-147(*) 6.195 5.875 .490 4.940
150 MB3-150(*) 6.295 5.975 .490 5.040
153 MB3-153(*) 6.395 6.075 .490 5.140
156 MB3-156(*) 6.495 6.175 .490 5.240
159 MB3-159(*) 6.595 6.275 .490 5.340
162 MB3-162(*) 6.695 6.375 .490 5.440
165 MB3-165(*) 6.795 6.475 .490 5.540
Low Mating Force
mother board connector
3 row contact arrangements
Number
of
Contacts MB
Number* A
Max.
B C
Max.
G
Min.
168 MB3-168(*) 6.895 6.575 .490 5.640
171 MB3-171(*) 6.995 6.675 .490 5.740
174 MB3-174(*) 7.095 6.775 .490 5.840
177 MB3-177(*) 7.195 6.875 .490 5.940
180 MB3-180(*) 7.295 6.975 .490 6.040
183 MB3-183(*) 7.395 7.075 .490 6.140
186 MB3-186(*) 7.495 7.175 .490 6.240
189 MB3-189(*) 7.595 7.275 .490 6.340
192 MB3-192(*) 7.695 7.375 .490 6.440
195 MB3-195(*) 7.795 7.475 .490 6.540
198 MB3-198(*) 7.895 7.575 .490 6.640
201 MB3-201(*) 7.995 7.675 .490 6.740
204 MB3-204(*) 8.095 7.775 .490 6.840
207 MB3-207(*) 8.195 7.875 .490 6.940
210 MB3-210(*) 8.295 7.975 .490 7.040
213 MB3-213(*) 8.395 8.075 .490 7.140
216 MB3-216(*) 8.495 8.175 .490 7.240
219 MB3-219(*) 8.595 8.275 .490 7.340
222 MB3-222(*) 8.695 8.375 .490 7.440
225 MB3-225(*) 8.795 8.475 .490 7.540
228 MB3-228(*) 8.895 8.575 .490 7.640
231 MB3-231(*) 8.995 8.675 .490 7.740
234 MB3-234(*) 9.095 8.775 .490 7.840
237 MB3-237(*) 9.195 8.875 .490 7.940
240 MB3-240(*) 9.295 8.975 .490 8.040
243 MB3-243(*) 9.395 9.075 .490 8.140
246 MB3-246(*) 9.495 9.175 .490 8.240
249 MB3-249(*) 9.595 9.275 .490 8.340
252 MB3-252(*) 9.695 9.375 .490 8.440
255 MB3-255(*) 9.795 9.475 .490 8.540
258 MB3-258(*) 9.895 9.575 .490 8.640
261 MB3-261(*) 9.995 9.675 .490 8.740
264 MB3-264(*) 10.095 9.775 .490 8.840
267 MB3-267(*) 10.195 9.875 .490 8.940
270 MB3-270(*) 10.295 9.975 .490 9.040
273 MB3-273(*) 10.395 10.075 .490 9.140
276 MB3-276(*) 10.495 10.175 .490 9.240
279 MB3-279(*) 10.595 10.275 .490 9.340
282 MB3-282(*) 10.695 10.375 .490 9.440
285 MB3-285(*) 10.795 10.475 .490 9.540
288 MB3-288(*) 10.895 10.575 .490 9.640
291 MB3-291(*) 10.995 10.675 .490 9.740
294 MB3-294(*) 11.095 10.775 .490 9.840
297 MB3-297(*) 11.195 10.875 .490 9.940
300 MB3-300(*) 11.295 10.975 .490 10.040
*See How to Order, pages 3, 4 and 5.
11
Low Mating Force
mother board connector
4 row contact arrangements
Number
of
Contacts MB
Number* A
Max.
B C
Max.
G
Min.
224 MB4-224(*) 6.895 6.575 .590 5.640
228 MB4-228(*) 6.995 6.675 .590 5.740
232 MB4-232(*) 7.095 6.775 .590 5.840
236 MB4-236(*) 7.195 6.875 .590 5.940
240 MB4-240(*) 7.295 6.975 .590 6.040
244 MB4-244(*) 7.395 7.075 .590 6.140
248 MB4-248(*) 7.495 7.175 .590 6.240
252 MB4-252(*) 7.595 7.275 .590 6.340
256 MB4-256(*) 7.695 7.375 .590 6.440
260 MB4-260(*) 7.795 7.475 .590 6.540
264 MB4-264(*) 7.895 7.575 .590 6.640
268 MB4-268(*) 7.995 7.675 .590 6.740
272 MB4-272(*) 8.095 7.775 .590 6.840
276 MB4-276(*) 8.195 7.875 .590 6.940
280 MB4-280(*) 8.295 7.975 .590 7.040
284 MB4-284(*) 8.395 8.075 .590 7.140
288 MB4-288(*) 8.495 8.175 .590 7.240
292 MB4-292(*) 8.595 8.275 .590 7.340
296 MB4-296(*) 8.695 8.375 .590 7.440
300 MB4-300(*) 8.795 8.475 .590 7.540
304 MB4-304(*) 8.895 8.575 .590 7.640
308 MB4-308(*) 8.995 8.675 .590 7.740
312 MB4-312(*) 9.095 8.775 .590 7.840
316 MB4-316(*) 9.195 8.875 .590 7.940
320 MB4-320(*) 9.295 8.975 .590 8.040
324 MB4-324(*) 9.395 9.075 .590 8.140
328 MB4-328(*) 9.495 9.175 .590 8.240
332 MB4-332(*) 9.595 9.275 .590 8.340
336 MB4-336(*) 9.695 9.375 .590 8.440
340 MB4-340(*) 9.795 9.475 .590 8.540
344 MB4-344(*) 9.895 9.575 .590 8.640
348 MB4-348(*) 9.995 9.675 .590 8.740
352 MB4-352(*) 10.095 9.775 .590 8.840
356 MB4-356(*) 10.195 9.875 .590 8.940
360 MB4-360(*) 10.295 9.975 .590 9.040
364 MB4-364(*) 10.395 10.075 .590 9.140
368 MB4-368(*) 10.495 10.175 .590 9.240
372 MB4-372(*) 10.595 10.275 .590 9.340
376 MB4-376(*) 10.695 10.375 .590 9.440
380 MB4-380(*) 10.795 10.475 .590 9.540
384 MB4-384(*) 10.895 10.575 .590 9.640
388 MB4-388(*) 10.995 10.675 .590 9.740
392 MB4-392(*) 11.095 10.775 .590 9.840
396 MB4-396(*) 11.195 10.875 .590 9.940
400 MB4-400(*) 11.295 10.975 .590 10.040
*See How to Order, pages 3, 4 and 5.
Number
of
Contacts MB
Number* A
Max.
B C
Max.
G
Min.
040 MB4-040(*) 2.295 1.975 .590 1.040
044 MB4-044(*) 2.395 2.075 .590 1.140
048 MB4-048(*) 2.495 2.175 .590 1.240
052 MB4-052(*) 2.595 2.275 .590 1.340
056 MB4-056(*) 2.695 2.375 .590 1.440
060 MB4-060(*) 2.795 2.475 .590 1.540
064 MB4-064(*) 2.895 2.575 .590 1.640
068 MB4-068(*) 2.995 2.675 .590 1.740
072 MB4-072(*) 3.095 2.775 .590 1.840
076 MB4-076(*) 3.195 2.875 .590 1.940
080 MB4-080(*) 3.295 2.975 .590 2.040
084 MB4-084(*) 3.395 3.075 .590 2.140
088 MB4-088(*) 3.495 3.175 .590 2.240
092 MB4-092(*) 3.595 3.275 .590 2.340
096 MB4-096(*) 3.695 3.375 .590 2.440
100 MB4-100(*) 3.795 3.475 .590 2.540
104 MB4-104(*) 3.895 3.575 .590 2.640
108 MB4-108(*) 3.995 3.675 .590 2.740
112 MB4-112(*) 4.095 3.775 .590 2.840
116 MB4-116(*) 4.195 3.875 .590 2.940
120 MB4-120(*) 4.295 3.975 .590 3.040
124 MB4-124(*) 4.395 4.075 .590 3.140
128 MB4-128(*) 4.495 4.175 .590 3.240
132 MB4-132(*) 4.595 4.275 .590 3.340
136 MB4-136(*) 4.695 4.375 .590 3.440
140 MB4-140(*) 4.795 4.475 .590 3.540
144 MB4-144(*) 4.895 4.575 .590 3.640
148 MB4-148(*) 4.995 4.675 .590 3.740
152 MB4-152(*) 5.095 4.775 .590 3.840
156 MB4-156(*) 5.195 4.875 .590 3.940
160 MB4-160(*) 5.295 4.975 .590 4.040
164 MB4-164(*) 5.395 5.075 .590 4.140
168 MB4-168(*) 5.495 5.175 .590 4.240
172 MB4-172(*) 5.595 5.275 .590 4.340
176 MB4-176(*) 5.695 5.375 .590 4.440
180 MB4-180(*) 5.795 5.475 .590 4.540
184 MB4-184(*) 5.895 5.575 .590 4.640
188 MB4-188(*) 5.995 5.675 .590 4.740
192 MB4-192(*) 6.095 5.775 .590 4.840
196 MB4-196(*) 6.195 5.875 .590 4.940
200 MB4-200(*) 6.295 5.975 .590 5.040
204 MB4-204(*) 6.395 6.075 .590 5.140
208 MB4-208(*) 6.495 6.175 .590 5.240
212 MB4-212(*) 6.595 6.275 .590 5.340
216 MB4-216(*) 6.695 6.375 .590 5.440
220 MB4-220(*) 6.795 6.475 .590 5.540
12
.096
DIA. 2 SIDES
+.005
–.000
.010 M
-D-
.115
.285
B
AA
A
±.005
C
H
.220 x .075 DEEP
2 PLACES
(FOR HEX NUT .187 MAX. ACROSS
FLATS, .205 MIN. ACROSS CORNERS)
.020 MD M MINUS .010Y
.115
-Y-
J.075 +.005
–.000
K
C
±.005
.056
H
CENTER OF ROW A CONTACTS
REF
Low Mating Force
daughter board connector
Contact Data
Description Termination
Style
Letter
Arrangement
Row J
±.020 K
±.002
Round PCB
Stud, 90°
Solder
Termination
PA .085 .021 Dia.
P B .085 .021 Dia.
PC .085 .021 Dia.
PD .085 .021 Dia.
P-(705) A .120 .021 Dia.
P-(705) B .120 .021 Dia.
P-(705) C .120 .021 Dia.
P-(705) D .120 .021 Dia.
P-(709) A .300 .021 Dia.
P-(709) B .300 .021 Dia.
P-(709) C .300 .021 Dia.
P-(709) D .300 .021 Dia.
NOTE: Other variations available - see pages 4 and 5, or consult
Amphenol Aerospace.
MATES WITH MB AND PC SERIES CONNECTORS
Notes:
When mating with MB or PC connector, a total of .035 inch mini mum
radial pilot is available for connector body alignment.
All dimensions for reference only.
Polarization keys are not supplied as part of DB Connector Series
assemblies. See Accessories How to Order, page 5 and further
description, page 24.
Designates Basic Dimension
daughter board connector
13
Low Mating Force
daughter board connector
2 row contact arrangements
Number
of
Contacts DB
Number* A
Max.
B C
Max. H
Max. AA
020 DB2-020P 1.680 1.350 .375 .545 .900
022 DB2-022P 1.780 1.450 .375 .545 1.000
024 DB2-024P 1.880 1.550 .375 .545 1.100
026 DB2-026P 1.980 1.650 .375 .545 1.200
028 DB2-028P 2.080 1.750 .375 .545 1.300
030 DB2-030P 2.180 1.850 .375 .545 1.400
032 DB2-032P 2.280 1.950 .375 .545 1.500
034 DB2-034P 2.380 2.050 .375 .545 1.600
036 DB2-036P 2.480 2.150 .375 .545 1.700
038 DB2-038P 2.580 2.250 .375 .545 1.800
040 DB2-040P 2.680 2.350 .375 .545 1.900
042 DB2-042P 2.780 2.450 .375 .545 2.000
044 DB2-044P 2.880 2.550 .375 .545 2.100
046 DB2-046P 2.980 2.650 .375 .545 2.200
048 DB2-048P 3.080 2.750 .375 .545 2.300
050 DB2-050P 3.180 2.850 .375 .545 2.400
052 DB2-052P 3.280 2.950 .375 .545 2.500
054 DB2-054P 3.380 3.050 .375 .545 2.600
056 DB2-056P 3.480 3.150 .375 .545 2.700
058 DB2-058P 3.580 3.250 .375 .545 2.800
060 DB2-060P 3.680 3.350 .375 .545 2.900
062 DB2-062P 3.780 3.450 .375 .545 3.000
064 DB2-064P 3.880 3.550 .375 .545 3.100
066 DB2-066P 3.980 3.650 .375 .545 3.200
068 DB2-068P 4.080 3.750 .375 .545 3.300
070 DB2-070P 4.180 3.850 .375 .545 3.400
072 DB2-072P 4.280 3.950 .375 .545 3.500
074 DB2-074P 4.380 4.050 .375 .545 3.600
076 DB2-076P 4.480 4.150 .375 .545 3.700
078 DB2-078P 4.580 4.250 .375 .545 3.800
080 DB2-080P 4.680 4.350 .375 .545 3.900
082 DB2-082P 4.780 4.450 .375 .545 4.000
084 DB2-084P 4.880 4.550 .375 .545 4.100
086 DB2-086P 4.980 4.650 .375 .545 4.200
088 DB2-088P 5.080 4.750 .375 .545 4.300
090 DB2-090P 5.180 4.850 .375 .545 4.400
092 DB2-092P 5.280 4.950 .375 .545 4.500
094 DB2-094P 5.380 5.050 .375 .545 4.600
096 DB2-096P 5.480 5.150 .375 .545 4.700
098 DB2-098P 5.580 5.250 .375 .545 4.800
100 DB2-100P 5.680 5.350 .375 .545 4.900
102 DB2-102P 5.780 5.450 .375 .545 5.000
104 DB2-104P 5.880 5.550 .375 .545 5.100
106 DB2-106P 5.980 5.650 .375 .545 5.200
108 DB2-108P 6.080 5.750 .375 .545 5.300
110 DB2-110P 6.180 5.850 .375 .545 5.400
Number
of
Contacts DB
Number* A
Max.
B C
Max. H
Max. AA
112 DB2-112P 6.280 5.950 .375 .545 5.500
114 DB2-114P 6.380 6.050 .375 .545 5.600
116 DB2-116P 6.480 6.150 .375 .545 5.700
118 DB2-118P 6.580 6.250 .375 .545 5.800
120 DB2-120P 6.680 6.350 .375 .545 5.900
122 DB2-122P 6.780 6.450 .375 .545 6.000
124 DB2-124P 6.880 6.550 .375 .545 6.100
126 DB2-126P 6.980 6.650 .375 .545 6.200
128 DB2-128P 7.080 6.750 .375 .545 6.300
130 DB2-130P 7.180 6.850 .375 .545 6.400
132 DB2-132P 7.280 6.950 .375 .545 6.500
134 DB2-134P 7.380 7.050 .375 .545 6.600
136 DB2-136P 7.480 7.150 .375 .545 6.700
138 DB2-138P 7.580 7.250 .375 .545 6.800
140 DB2-140P 7.680 7.350 .375 .545 6.900
142 DB2-142P 7.780 7.450 .375 .545 7.000
144 DB2-144P 7.880 7.550 .375 .545 7.100
146 DB2-146P 7.980 7.650 .375 .545 7.200
148 DB2-148P 8.080 7.750 .375 .545 7.300
150 DB2-150P 8.180 7.850 .375 .545 7.400
152 DB2-152P 8.280 7.950 .375 .545 7.500
154 DB2-154P 8.380 8.050 .375 .545 7.600
156 DB2-156P 8.480 8.150 .375 .545 7.700
158 DB2-158P 8.580 8.250 .375 .545 7.800
160 DB2-160P 8.680 8.350 .375 .545 7.900
162 DB2-162P 8.780 8.450 .375 .545 8.000
164 DB2-164P 8.880 8.550 .375 .545 8.100
166 DB2-166P 8.980 8.650 .375 .545 8.200
168 DB2-168P 9.080 8.750 .375 .545 8.300
170 DB2-170P 9.180 8.850 .375 .545 8.400
172 DB2-172P 9.280 8.950 .375 .545 8.500
174 DB2-174P 9.380 9.050 .375 .545 8.600
176 DB2-176P 9.480 9.150 .375 .545 8.700
178 DB2-178P 9.580 9.250 .375 .545 8.800
180 DB2-180P 9.680 9.350 .375 .545 8.900
182 DB2-182P 9.780 9.450 .375 .545 9.000
184 DB2-184P 9.880 9.550 .375 .545 9.100
186 DB2-186P 9.980 9.650 .375 .545 9.200
188 DB2-188P 10.080 9.750 .375 .545 9.300
190 DB2-190P 10.180 9.850 .375 .545 9.400
192 DB2-192P 10.280 9.950 .375 .545 9.500
194 DB2-194P 10.380 10.050 .375 .545 9.600
196 DB2-196P 10.480 10.150 .375 .545 9.700
198 DB2-198P 10.580 10.250 .375 .545 9.800
200 DB2-200P 10.680 10.350 .375 .545 9.900
*See How to Order, pages 3, 4 and 5
14
Number
of
Contacts DB
Number* A
Max.
B C
Max. H
Max. AA
030 DB3-030P 1.680 1.350 .475 .645 .900
033 DB3-033P 1.780 1.450 .475 .645 1.000
036 DB3-036P 1.880 1.550 .475 .645 1.100
039 DB3-039P 1.980 1.650 .475 .645 1.200
042 DB3-042P 2.080 1.750 .475 .645 1.300
045 DB3-045P 2.180 1.850 .475 .645 1.400
048 DB3-048P 2.280 1.950 .475 .645 1.500
051 DB3-051P 2.380 2.050 .475 .645 1.600
054 DB3-054P 2.480 2.150 .475 .645 1.700
057 DB3-057P 2.580 2.250 .475 .645 1.800
060 DB3-060P 2.680 2.350 .475 .645 1.900
063 DB3-063P 2.780 2.450 .475 .645 2.000
066 DB3-066P 2.880 2.550 .475 .645 2.100
069 DB3-069P 2.980 2.650 .475 .645 2.200
072 DB3-072P 3.080 2.750 .475 .645 2.300
075 DB3-075P 3.180 2.850 .475 .645 2.400
078 DB3-078P 3.280 2.950 .475 .645 2.500
081 DB3-081P 3.380 3.050 .475 .645 2.600
084 DB3-084P 3.480 3.150 .475 .645 2.700
087 DB3-087P 3.580 3.250 .475 .645 2.800
090 DB3-090P 3.680 3.350 .475 .645 2.900
093 DB3-093P 3.780 3.450 .475 .645 3.000
096 DB3-096P 3.880 3.550 .475 .645 3.100
099 DB3-099P 3.980 3.650 .475 .645 3.200
102 DB3-102P 4.080 3.750 .475 .645 3.300
105 DB3-105P 4.180 3.850 .475 .645 3.400
108 DB3-108P 4.280 3.950 .475 .645 3.500
111 DB3-111P 4.380 4.050 .475 .645 3.600
114 DB3-114P 4.480 4.150 .475 .645 3.700
117 DB3-117P 4.580 4.250 .475 .645 3.800
120 DB3-120P 4.680 4.350 .475 .645 3.900
123 DB3-123P 4.780 4.450 .475 .645 4.000
126 DB3-126P 4.880 4.550 .475 .645 4.100
129 DB3-129P 4.980 4.650 .475 .645 4.200
132 DB3-132P 5.080 4.750 .475 .645 4.300
135 DB3-135P 5.180 4.850 .475 .645 4.400
138 DB3-138P 5.280 4.950 .475 .645 4.500
141 DB3-141P 5.380 5.050 .475 .645 4.600
144 DB3-144P 5.480 5.150 .475 .645 4.700
147 DB3-147P 5.580 5.250 .475 .645 4.800
150 DB3-150P 5.680 5.350 .475 .645 4.900
153 DB3-153P 5.780 5.450 .475 .645 5.000
156 DB3-156P 5.880 5.550 .475 .645 5.100
159 DB3-159P 5.980 5.650 .475 .645 5.200
162 DB3-162P 6.080 5.750 .475 .645 5.300
165 DB3-165P 6.180 5.850 .475 .645 5.400
Low Mating Force
daughter board connector
3 row contact arrangements
Number
of
Contacts DB
Number* A
Max.
B C
Max. H
Max. AA
168 DB3-168P 6.280 5.950 .475 .645 5.500
171 DB3-171P 6.380 6.050 .475 .645 5.600
174 DB3-174P 6.480 6.150 .475 .645 5.700
177 DB3-177P 6.580 6.250 .475 .645 5.800
180 DB3-180P 6.680 6.350 .475 .645 5.900
183 DB3-183P 6.780 6.450 .475 .645 6.000
186 DB3-186P 6.880 6.550 .475 .645 6.100
189 DB3-189P 6.980 6.650 .475 .645 6.200
192 DB3-192P 7.080 6.750 .475 .645 6.300
195 DB3-195P 7.180 6.850 .475 .645 6.400
198 DB3-198P 7.280 6.950 .475 .645 6.500
201 DB3-201P 7.380 7.050 .475 .645 6.600
204 DB3-204P 7.480 7.150 .475 .645 6.700
207 DB3-207P 7.580 7.250 .475 .645 6.800
210 DB3-210P 7.680 7.350 .475 .645 6.900
213 DB3-213P 7.780 7.450 .475 .645 7.000
216 DB3-216P 7.880 7.550 .475 .645 7.100
219 DB3-219P 7.980 7.650 .475 .645 7.200
222 DB3-222P 8.080 7.750 .475 .645 7.300
225 DB3-225P 8.180 7.850 .475 .645 7.400
228 DB3-228P 8.280 7.950 .475 .645 7.500
231 DB3-231P 8.380 8.050 .475 .645 7.600
234 DB3-234P 8.480 8.150 .475 .645 7.700
237 DB3-237P 8.580 8.250 .475 .645 7.800
240 DB3-240P 8.680 8.350 .475 .645 7.900
243 DB3-243P 8.780 8.450 .475 .645 8.000
246 DB3-246P 8.880 8.550 .475 .645 8.100
249 DB3-249P 8.980 8.650 .475 .645 8.200
252 DB3-252P 9.080 8.750 .475 .645 8.300
255 DB3-255P 9.180 8.850 .475 .645 8.400
258 DB3-258P 9.280 8.950 .475 .645 8.500
261 DB3-261P 9.380 9.050 .475 .645 8.600
264 DB3-264P 9.480 9.150 .475 .645 8.700
267 DB3-267P 9.580 9.250 .475 .645 8.800
270 DB3-270P 9.680 9.350 .475 .645 8.900
273 DB3-273P 9.780 9.450 .475 .645 9.000
276 DB3-276P 9.880 9.550 .475 .645 9.100
279 DB3-279P 9.980 9.650 .475 .645 9.200
282 DB3-282P 10.080 9.750 .475 .645 9.300
285 DB3-285P 10.180 9.850 .475 .645 9.400
288 DB3-288P 10.280 9.950 .475 .645 9.500
291 DB3-291P 10.380 10.050 .475 .645 9.600
294 DB3-294P 10.480 10.150 .475 .645 9.700
297 DB3-397P 10.580 10.250 .475 .645 9.800
300 DB3-300P 10.680 10.350 .475 .645 9.900
*See How to Order, pages 3, 4 and 5
15
Low Mating Force
daughter board connector
4 row contact arrangements
Number
of
Contacts DB
Number* A
Max.
B C
Max. H
Max. AA
040 DB4-040P 1.680 1.350 .575 .745 .900
044 DB4-044P 1.780 1.450 .575 .745 1.000
048 DB4-048P 1.880 1.550 .575 .745 1.100
052 DB4-052P 1.980 1.650 .575 .745 1.200
056 DB4-056P 2.080 1.750 .575 .745 1.300
060 DB4-060P 2.180 1.850 .575 .745 1.400
064 DB4-064P 2.280 1.950 .575 .745 1.500
068 DB4-068P 2.380 2.050 .575 .745 1.600
072 DB4-072P 2.480 2.150 .575 .745 1.700
076 DB4-076P 2.580 2.250 .575 .745 1.800
080 DB4-080P 2.680 2.350 .575 .745 1.900
084 DB4-084P 2.780 2.450 .575 .745 2.000
088 DB4-088P 2.880 2.550 .575 .745 2.100
092 DB4-092P 2.980 2.650 .575 .745 2.200
096 DB4-096P 3.080 2.750 .575 .745 2.300
100 DB4-100P 3.180 2.850 .575 .745 2.400
104 DB4-104P 3.280 2.950 .575 .745 2.500
108 DB4-108P 3.380 3.050 .575 .745 2.600
112 DB4-112P 3.480 3.150 .575 .745 2.700
116 DB4-116P 3.580 3.250 .575 .745 2.800
120 DB4-120P 3.680 3.350 .575 .745 2.900
124 DB4-124P 3.780 3.450 .575 .745 3.000
128 DB4-128P 3.880 3.550 .575 .745 3.100
132 DB4-132P 3.980 3.650 .575 .745 3.200
136 DB4-136P 4.080 3.750 .575 .745 3.300
140 DB4-140P 4.180 3.850 .575 .745 3.400
144 DB4-144P 4.280 3.950 .575 .745 3.500
148 DB4-148P 4.380 4.050 .575 .745 3.600
152 DB4-152P 4.480 4.150 .575 .745 3.700
156 DB4-156P 4.580 4.250 .575 .745 3.800
160 DB4-160P 4.680 4.350 .575 .745 3.900
164 DB4-164P 4.780 4.450 .575 .745 4.000
168 DB4-168P 4.880 4.550 .575 .745 4.100
172 DB4-172P 4.980 4.650 .575 .745 4.200
176 DB4-176P 5.080 4.750 .575 .745 4.300
180 DB4-180P 5.180 4.850 .575 .745 4.400
184 DB4-184P 5.280 4.950 .575 .745 4.500
188 DB4-188P 5.380 5.050 .575 .745 4.600
192 DB4-192P 5.480 5.150 .575 .745 4.700
196 DB4-196P 5.580 5.250 .575 .745 4.800
200 DB4-200P 5.680 5.350 .575 .745 4.900
204 DB4-204P 5.780 5.450 .575 .745 5.000
208 DB4-208P 5.880 5.550 .575 .745 5.100
212 DB4-212P 5.980 5.650 .575 .745 5.200
216 DB4-216P 6.080 5.750 .575 .745 5.300
220 DB4-220P 6.180 5.850 .575 .745 5.400
Number
of
Contacts DB
Number* A
Max.
B C
Max. H
Max. AA
224 DB4-224P 6.280 5.950 .575 .745 5.500
228 DB4-228P 6.380 6.050 .575 .745 5.600
232 DB4-232P 6.480 6.150 .575 .745 5.700
236 DB4-236P 6.580 6.250 .575 .745 5.800
240 DB4-240P 6.680 6.350 .575 .745 5.900
244 DB4-244P 6.780 6.450 .575 .745 6.000
248 DB4-248P 6.880 6.550 .575 .745 6.100
252 DB4-252P 6.980 6.650 .575 .745 6.200
256 DB4-256P 7.080 6.750 .575 .745 6.300
260 DB4-260P 7.180 6.850 .575 .745 6.400
264 DB4-264P 7.280 6.950 .575 .745 6.500
268 DB4-268P 7.380 7.050 .575 .745 6.600
272 DB4-272P 7.480 7.150 .575 .745 6.700
276 DB4-276P 7.580 7.250 .575 .745 6.800
280 DB4-280P 7.680 7.350 .575 .745 6.900
284 DB4-284P 7.780 7.450 .575 .745 7.000
288 DB4-288P 7.780 7.550 .575 .745 7.100
292 DB4-292P 7.980 7.650 .575 .745 7.200
296 DB4-296P 8.080 7.750 .575 .745 7.300
300 DB4-300P 8.180 7.850 .575 .745 7.400
304 DB4-304P 8.280 7.950 .575 .745 7.500
308 DB4-308P 8.380 8.050 .575 .745 7.600
312 DB4-312P 8.480 8.150 .575 .745 7.700
316 DB4-316P 8.580 8.250 .575 .745 7.800
320 DB4-320P 8.680 8.350 .575 .745 7.900
324 DB4-324P 8.780 8.450 .575 .745 8.000
328 DB4-328P 8.880 8.550 .575 .745 8.100
332 DB4-332P 8.980 8.650 .575 .745 8.200
336 DB4-336P 9.080 8.750 .575 .745 8.300
340 DB4-340P 9.180 8.850 .575 .745 8.400
344 DB4-344P 9.280 8.950 .575 .745 8.500
348 DB4-348P 9.380 9.050 .575 .745 8.600
352 DB4-352P 9.480 9.150 .575 .745 8.700
356 DB4-356P 9.580 9.250 .575 .745 8.800
360 DB4-360P 9.680 9.350 .575 .745 8.900
364 DB4-364P 9.780 9.450 .575 .745 9.000
368 DB4-368P 9.880 9.550 .575 .745 9.100
372 DB4-372P 9.980 9.650 .575 .745 9.200
376 DB4-376P 10.080 9.750 .575 .745 9.300
380 DB4-380P 10.180 9.850 .575 .745 9.400
384 DB4-384P 10.280 9.950 .575 .745 9.500
388 DB4-388P 10.380 10.050 .575 .745 9.600
392 DB4-392P 10.480 10.150 .575 .745 9.700
396 DB4-396P 10.580 10.250 .575 .745 9.800
400 DB4-400P 10.680 10.350 .575 .745 9.900
*See How to Order, pages 3, 4 and 5
16
J
.670
MAX.
.540
MAX.
K
A
B
C
.220 DIA.
.785 MAX.
UNMATED
FREE
LENGTH
.650 MAX.
WHEN FULLY
ASSEMBLED TO
MATING
CONNECTOR
LOCKING SCREW
10-502599
ACCESSORY ITEM**
4-40
UNC-2A
.445 MAX.
UNMATED
FREE LENGTH
.31 MAX.
WHEN FULLY
ASSEMBLED
TO MATING
CONNECTOR
.220 DIA.
LOCKING SCREW
10-502599-2
ACCESSORY ITEM**
Low Mating Force
input/output connector
MATES WITH MB AND PC SERIES CONNECTORS
Notes:
When mating with MB or PC connector, a total of .022 inch minimum
radial pilot is available for connector body alignment.
All dimensions for reference only.
Crimp contact, wire well size 22D, supplied with IO Connector Series
assemblies. Optional noble metal termina tion plating available. See
How to Order, page 5.
Polarization keys are not supplied as part of IO Connector Series
assemblies. See Accessories How to Order, page 5 and further
description, page 24.
** Locking Screws are not supplied as part of IO Connector Series
assemblies. See Accessories How to Order, page 5 and further
description, page 29.
Contact Data
Description Termination
Style
Letter
J
±.020 K
±.002
Rear Removable
Crimp Contact C N/A N/A
Round PCB
Stud Solder
Termination
P.145 .021
P-(713) .060 .021
P-(709) .335 .021
NOTE: Other variations available - see pages 4 and 5, or
consult Amphenol Aerospace.
17
Number
of
Contacts IO
Number* A
Max.
B C
Max.
112 IO2-112(*) 6.895 6.575 .390
114 IO2-114(*) 6.995 6.675 .390
116 IO2-116(*) 7.095 6.775 .390
118 IO2-118(*) 7.195 6.875 .390
120 IO2-120(*) 7.295 6.975 .390
122 IO2-122(*) 7.395 7.075 .390
124 IO2-124(*) 7.495 7.175 .390
126 IO2-126(*) 7.595 7.275 .390
128 IO2-128(*) 7.695 7.375 .390
130 IO2-130(*) 7.795 7.475 .390
132 IO2-132(*) 7.895 7.575 .390
134 IO2-134(*) 7.995 7.675 .390
136 IO2-136(*) 8.095 7.775 .390
138 IO2-138(*) 8.195 7.875 .390
140 IO2-140(*) 8.295 7.975 .390
142 IO2-142(*) 8.395 8.075 .390
144 IO2-144(*) 8.495 8.175 .390
146 IO2-146(*) 8.595 8.275 .390
148 IO2-148(*) 8.695 8.375 .390
150 IO2-150(*) 8.795 8.475 .390
152 IO2-152(*) 8.895 8.575 .390
154 IO2-154(*) 8.995 8.675 .390
156 IO2-156(*) 9.095 8.775 .390
158 IO2-158)*) 9.195 8.875 .390
160 IO2-160(*) 9.295 8.975 .390
162 IO2-162(*) 9.395 9.075 .390
164 IO2-164(*) 9.495 9.175 .390
166 IO2-166(*) 9.595 9.275 .390
168 IO2-168(*) 9.695 9.375 .390
170 IO2-170(*) 9.795 9.475 .390
172 IO2-172(*) 9.895 9.575 .390
174 IO2-174(*) 9.995 9.675 .390
176 IO2-176(*) 10.095 9.775 .390
178 IO2-178(*) 10.195 9.875 .390
180 IO2-180(*) 10.295 9.975 .390
182 IO2-182(*) 10.395 10.075 .390
184 IO2-184(*) 10.495 10.175 .390
186 IO2-186(*) 10.595 10.275 .390
188 IO2-188(*) 10.695 10.375 .390
190 IO2-190(*) 10.795 10.475 .390
192 IO2-192(*) 10.895 10.575 .390
194 IO2-194(*) 10.995 10.675 .390
196 IO2-196(*) 11.095 10.775 .390
198 IO2-198(*) 11.195 10.875 .390
200 IO2-200(*) 11.295 10.975 .390
*See How to Order, pages 3, 4 and 5
Low Mating Force
input/output connector
2 row contact arrangements
Number
of
Contacts IO
Number* A
Max.
B C
Max.
020 IO2-020(*) 2.295 1.975 .390
022 IO2-022(*) 2.395 2.075 .390
024 IO2-024(*) 2.495 2.175 .390
026 IO2-026(*) 2.595 2.275 .390
028 IO2-028(*) 2.695 2.375 .390
030 IO2-030(*) 2.795 2.475 .390
032 IO2-032(*) 2.895 2.575 .390
034 IO2-034(*) 2.995 2.675 .390
036 IO2-036(*) 3.095 2.775 .390
038 IO2-038(*) 3.195 2.875 .390
040 IO2-040(*) 3.295 2.975 .390
042 IO2-042(*) 3.395 3.075 .390
044 IO2-044(*) 3.495 3.175 .390
046 IO2-046(*) 3.595 3.275 .390
048 IO2-048(*) 3.695 3.375 .390
050 IO2-050(*) 3.795 3.475 .390
052 IO2-052(*) 3.895 3.575 .390
054 IO2-054(*) 3.995 3.675 .390
056 IO2-056(*) 4.095 3.775 .390
058 IO2-058(*) 4.195 3.875 .390
060 IO2-060(*) 4.295 3.975 .390
062 IO2-062(*) 4.395 4.075 .390
064 IO2-064(*) 4.495 4.175 .390
066 IO2-066(*) 4.595 4.275 .390
068 IO2-068(*) 4.695 4.375 .390
070 IO2-070(*) 4.795 4.475 .390
072 IO2-072(*) 4.895 4.575 .390
074 IO2-074(*) 4.995 4.675 .390
076 IO2-076(*) 5.095 4.775 .390
078 IO2-078(*) 5.195 4.875 .390
080 IO2-080(*) 5.295 4.975 .390
082 IO2-082(*) 5.395 5.075 .390
084 IO2-084(*) 5.495 5.175 .390
086 IO2-086(*) 5.595 5.275 .390
088 IO2-088(*) 5.695 5.375 .390
090 IO2-090(*) 5.795 5.475 .390
092 IO2-092(*) 5.895 5.575 .390
094 IO2-094(*) 5.995 5.675 .390
096 IO2-096(*) 6.095 5.775 .390
098 IO2-098(*) 6.195 5.875 .390
100 IO2-100(*) 6.295 5.975 .390
102 IO2-102(*) 6.395 6.075 .390
104 IO2-104(*) 6.495 6.175 .390
106 IO2-106(*) 6.595 6.275 .390
108 IO2-108(*) 6.695 6.375 .390
110 IO2-110(*) 6.795 6.475 .390
18
Low Mating Force
input/output connector
3 row contact arrangements
Number
of
Contacts IO
Number* A
Max.
B C
Max.
030 IO3-030(*) 2.295 1.975 .490
033 IO3-033(*) 2.395 2.075 .490
036 IO3-036(*) 2.495 2.175 .490
039 IO3-039(*) 2.595 2.275 .490
042 IO3-042(*) 2.695 2.375 .490
045 IO3-045(*) 2.795 2.475 .490
048 IO3-048(*) 2.894 2.575 .490
051 IO3-051(*) 2.995 2.675 .490
054 IO3-054(*) 3.095 2.775 .490
057 IO3-057(*) 3.195 2.875 .490
060 IO3-060(*) 3.295 2.975 .490
063 IO3-063(*) 3.395 3.075 .490
066 IO3-066(*) 3.495 3.175 .490
069 IO3-069(*) 3.595 3.275 .490
072 IO3-072(*) 3.695 3.375 .490
075 IO3-075(*) 3.795 3.475 .490
078 IO3-078(*) 3.895 3.575 .490
081 IO3-081(*) 3.995 3.675 .490
084 IO3-084(*) 4.095 3.775 .490
087 IO3-087(*) 4.195 3.875 .490
090 IO3-090(*) 4.295 3.975 .490
093 IO3-093(*) 4.395 4.075 .490
096 IO3-096(*) 4.495 4.175 .490
099 IO3-099(*) 4.595 4.275 .490
102 IO3-102(*) 4.695 4.375 .490
105 IO3-105(*) 4.795 4.475 .490
108 IO3-108(*) 4.895 4.575 .490
111 IO3-111(*) 4.995 4.675 .490
114 IO3-114(*) 5.095 4.775 .490
117 IO3-117(*) 5.195 4.875 .490
120 IO3-120(*) 5.295 4.975 .490
123 IO3-123(*) 5.395 5.075 .490
126 IO3-126(*) 5.495 5.175 .490
129 IO3-129(*) 5.595 5.275 .490
132 IO3-132(*) 5.695 5.375 .490
135 IO3-135(*) 5.795 5.475 .490
138 IO3-138(*) 5.895 5.575 .490
141 IO3-141(*) 5.995 5.675 .490
144 IO3-144(*) 6.095 5.775 .490
147 IO3-147(*) 6.195 5.875 .490
150 IO3-150(*) 6.295 5.975 .490
153 IO3-153(*) 6.395 6.075 .490
156 IO3-156(*) 6.495 6.175 .490
159 IO3-159(*) 6.595 6.275 .490
162 IO3-162(*) 6.695 6.375 .490
165 IO3-165(*) 6.795 6.475 .490
Number
of
Contacts IO
Number* A
Max.
B C
Max.
168 IO3-168(*) 6.895 6.575 .490
171 IO3-171(*) 6.995 6.675 .490
174 IO3-174(*) 7.095 6.775 .490
177 IO3-177(*) 7.195 6.875 .490
180 IO3-180(*) 7.295 6.975 .490
183 IO3-183(*) 7.395 7.075 .490
186 IO3-186(*) 7.495 7.175 .490
189 IO3-189(*) 7.595 7.275 .490
192 IO3-192(*) 7.695 7.375 .490
195 IO3-195(*) 7.795 7.475 .490
198 IO3-198(*) 7.895 7.575 .490
201 IO3-201(*) 7.995 7.675 .490
204 IO3-204(*) 8.095 7.775 .490
207 IO3-207(*) 8.195 7.875 .490
210 IO3-210(*) 8.295 7.975 .490
213 IO3-213(*) 8.395 8.075 .490
216 IO3-216(*) 8.495 8.175 .490
219 IO3-219(*) 8.595 8.275 .490
222 IO3-222(*) 8.695 8.375 .490
225 IO3-225(*) 8.795 8.475 .490
228 IO3-228(*) 8.895 8.575 .490
231 IO3-231(*) 8.995 8.675 .490
234 IO3-234(*) 9.095 8.775 .490
237 IO3-237(*) 9.195 8.875 .490
240 IO3-240(*) 9.295 8.975 .490
243 IO3-243(*) 9.395 9.075 .490
246 IO3-246(*) 9.495 9.175 .490
249 IO3-249(*) 9.595 9.275 .490
252 IO3-252(*) 9.695 9.375 .490
255 IO3-255(*) 9.795 9.475 .490
258 IO3-258(*) 9.895 9.575 .490
261 IO3-261(*) 9.995 9.675 .490
264 IO3-264(*) 10.095 9.775 .490
267 IO3-267(*) 10.195 9.875 .490
270 IO3-270(*) 10.295 9.975 .490
273 IO3-273(*) 10.395 10.075 .490
276 IO3-276(*) 10.495 10.175 .490
279 IO3-279(*) 10.595 10.275 .490
282 IO3-282(*) 10.695 10.375 .490
285 IO3-285(*) 10.795 10.475 .490
288 IO3-288(*) 10.895 10.575 .490
291 IO3-291(*) 10.995 10.675 .490
294 IO3-294(*) 11.095 10.775 .490
297 IO3-297(*) 11.195 10.875 .490
300 IO3-300(*) 11.295 10.975 .490
*See How to Order, pages 3, 4 and 5
19
Low Mating Force
input/output connector
4 row contact arrangements
Number
of
Contacts IO
Number* A
Max.
B C
Max.
224 IO4-224(*) 6.895 6.575 .590
228 IO4-228(*) 6.995 6.675 .590
232 IO4-232(*) 7.095 6.775 .590
236 IO4-236(*) 7.195 6.875 .590
240 IO4-240(*) 7.295 6.975 .590
244 IO4-244(*) 7.395 7.075 .590
248 IO4-248(*) 7.495 7.175 .590
252 IO4-252(*) 7.595 7.275 .590
256 IO4-256(*) 7.695 7.375 .590
260 IO4-260(*) 7.795 7.475 .590
264 IO4-264(*) 7.895 7.575 .590
268 IO4-268(*) 7.995 7.675 .590
272 IO4-272(*) 8.095 7.775 .590
276 IO4-276(*) 8.195 7.875 .590
280 IO4-280(*) 8.295 7.975 .590
284 IO4-284(*) 8.395 8.075 .590
288 IO4-288(*) 8.495 8.175 .590
292 IO4-292(*) 8.595 8.275 .590
296 IO4-296(*) 8.695 8.375 .590
300 IO4-300(*) 8.795 8.475 .590
304 IO4-304(*) 8.895 8.575 .590
308 IO4-308(*) 8.995 8.675 .590
312 IO4-312(*) 9.095 8.775 .590
316 IO4-316(*) 9.195 8.875 .590
320 IO4-320(*) 9.295 8.975 .590
324 IO4-324(*) 9.395 9.075 .590
328 IO4-328(*) 9.496 9.175 .590
332 IO4-332(*) 9.595 9.275 .590
336 IO4-336(*) 9.695 9.375 .590
340 IO4-340(*) 9.795 9.475 .590
344 IO4-344(*) 9.895 9.575 .590
348 IO4-348(*) 9.995 9.675 .590
352 IO4-352(*) 10.095 9.775 .590
356 IO4-356(*) 10.195 9.875 .590
360 IO4-360(*) 10.295 9.975 .590
364 IO4-364(*) 10.395 10.075 .590
368 IO4.368(*) 10.495 10.175 .590
372 IO4-372(*) 10.595 10.275 .590
376 IO4-376(*) 10.695 10.375 .590
380 IO4-380(*) 10.795 10.475 .590
384 IO4-384(*) 10.895 10.575 .590
388 IO4-388(*) 10.995 10.675 .590
392 IO4-392(*) 11.095 10.775 .590
396 IO4-396(*) 11.195 10.875 .590
400 IO4-400(*) 11.295 10.975 .590
*See How to Order, pages 3, 4 and 5
Number
of
Contacts IO
Number* A
Max.
B C
Max.
040 IO4-040(*) 2.295 1.975 .590
044 IO4-044(*) 2.395 2.075 .590
048 IO4-048(*) 2.495 2.175 .590
052 IO4-052(*) 2.595 2.275 .590
056 IO4-056(*) 2.695 2.375 .590
060 IO4-060(*) 2.795 2.475 .590
064 IO4-064(*) 2.895 2.575 .590
068 IO4-068(*) 2.995 2.675 .590
072 IO4-072(*) 3.095 2.775 .590
076 IO4-076(*) 3.195 2.875 .590
080 IO4-080(*) 3.295 2.975 .590
084 IO4-084(*) 3.395 3.075 .590
088 IO4-088(*) 3.495 3.175 .590
092 IO4-092(*) 3.595 3.275 .590
096 IO4-096(*) 3.695 3.375 .590
100 IO4-100(*) 3.795 3.475 .590
104 IO4-104(*) 3.895 3.575 .590
108 IO4-108(*) 3.995 3.675 .590
112 IO4-112(*) 4.095 3.775 .590
116 IO4-116(*) 4.195 3.875 .590
120 IO4-120(*) 4.295 3.975 .590
124 IO4-124(*) 4.395 4.075 .590
128 IO4-128(*) 4.495 4.175 .590
132 IO4-132(*) 4.595 4.275 .590
136 IO4-136(*) 4.695 4.375 .590
140 IO4-140(*) 4.795 4.475 .590
144 IO4-144(*) 4.895 4.575 .590
148 IO4-148(*) 4.995 4.675 .590
152 IO4-152(*) 5.095 4.775 .590
156 IO4-156(*) 5.195 4.875 .590
160 IO4-160(*) 5.295 4.975 .590
164 IO4-164(*) 5.395 5.075 .590
168 IO4-168(*) 5.495 5.175 .590
172 IO4-172(*) 5.595 5.275 .590
176 IO4-176(*) 5.695 5.375 .590
180 IO4-180(*) 5.795 5.475 .590
184 IO4-184(*) 5.895 5.575 .590
188 IO4-188(*) 5.995 5.675 .590
192 IO4-192(*) 6.095 5.775 .590
196 IO4-196(*) 6.195 5.875 .590
200 IO4-200(*) 6.295 5.975 .590
204 IO4-204(*) 6.395 6.075 .590
208 IO4-208(*) 6.495 6.175 .590
212 IO4-212(*) 6.595 6.275 .590
216 IO4-216(*) 6.695 6.375 .590
220 IO4-220(*) 6.795 6.475 .590
20
A
C
.185 +.005
–.002
J
-Y-
.132±.020
.100
DIA..021±.002
.020 MZ M MINUS .012Y
B
.126 +.004
–.002
.100
.200
.012 M
-Z-
X
.365 +.002
–.007
.193 MAX.
.365 .410
.105
USE #4
MOUNTING
SCREW
4-40
UNC-2B LOCKING BUSHING
FOR MATING WITH INPUT/
OUTPUT CONNECTOR,
ACCESSORY ITEM **
Low Mating Force
PC connector
MATES WITH DB AND IO SERIES CONNECTORS
Notes:
When mating with DB connector, a total of .035 inch minimum radial pilot
is available for connector body alignment.
All dimensions for reference only.
Polarization keys are not supplied as part of PC Connector Series
assemblies. See Accessories How to Order, page 5 and further
description, page 24.
** Locking busings are not supplied as part of PC Connector Series
assembles. See Accessories How to Order, page 5, and further
description, page 28.
Designates Basic Dimension
Contact Data
Description Termination
Style
Letter
Arrangement
Row
J
+.035
–.025
Round PCB
Stud, 90°
Solder
Termination
PA.095
P B .095
PC.095
PD.095
P-(714) A .150
P-(714) B .150
P-(714) C .150
P-(714) D .150
NOTE: Other variations available - see pages 4 and 5, or
consult Amphenol Aerospace.
21
Low Mating Force
PC connector
2 row contact arrangements
Number
of
Contacts PC
Number* A
Max.
B C
Max.
112 PC2-112P 6.895 6.575 .390
114 PC2-114P 6.995 6.675 .390
116 PC2-116P 7.095 6.775 .390
118 PC2-118P 7.195 6.875 .390
120 PC2-120P 7.295 6.975 .390
122 PC2-122P 7.395 7.075 .390
124 PC2-124P 7.495 7.175 .390
126 PC2-126P 7.595 7.275 .390
128 PC2-128P 7.695 7.375 .390
130 PC2-130P 7.795 7.475 .390
132 PC2-132P 7.895 7.575 .390
134 PC2-134P 7.995 7.675 .390
136 PC2-136P 8.095 7.775 .390
138 PC2-138P 8.195 7.875 .390
140 PC2-140P 8.295 7.975 .390
142 PC2-142P 8.395 8.075 .390
144 PC2-144P 8.495 8.175 .390
146 PC2-146P 8.595 8.275 .390
148 PC2-148P 8.695 8.375 .390
150 PC2-150P 8.795 8.475 .390
152 PC2-152P 8.895 8.575 .390
154 PC2-154P 8.995 8.675 .390
156 PC2-156P 9.095 8.775 .390
158 PC2-158P 9.195 8.875 .390
160 PC2-160P 9.295 8.975 .390
162 PC2-162P 9.395 9.075 .390
164 PC2-164P 9.495 9.175 .390
166 PC2-166P 9.595 9.275 .390
168 PC2-168P 9.695 9.375 .390
170 PC2-170P 9.795 9.475 .390
172 PC2-172P 9.895 9.575 .390
174 PC2-174P 9.995 9.675 .390
176 PC2-176P 10.095 9.775 .390
178 PC2-178P 10.195 9.875 .390
180 PC2-180P 10.295 9.975 .390
182 PC2-182P 10.395 10.075 .390
184 PC2-184P 10.495 10.175 .390
186 PC2-186P 10.595 10.275 .390
188 PC2-188P 10.695 10.375 .390
190 PC2-190P 10.795 10.475 .390
192 PC2-192P 10.895 10.575 .390
194 PC2-194P 10.995 10.675 .390
196 PC2-196P 11.095 10.775 .390
198 PC2-198P 11.195 10.875 .390
200 PC2-200P 11.295 10.975 .390
*See How to Order, pages 3, 4 and 5
Number
of
Contacts PC
Number* A
Max.
B C
Max.
020 PC2-020P 2.295 1.975 .390
022 PC2-022P 2.395 2.075 .390
024 PC2-024P 2.495 2.175 .390
026 PC2-026P 2.595 2.275 .390
028 PC2-028P 2.695 2.375 .390
030 PC2-030P 2.795 2.475 .390
032 PC2-032P 2.895 2.575 .390
034 PC2-034P 2.995 2.675 .390
036 PC2-036P 3.095 2.775 .390
038 PC2-038P 3.195 2.875 .390
040 PC2-040P 3.295 2.975 .390
042 PC2-042P 3.395 3.075 .390
044 PC2-044P 3.495 3.175 .390
046 PC2-046P 3.595 3.275 .390
048 PC2-048P 3.695 3.375 .390
050 PC2-050P 3.795 3.475 .390
052 PC2-052P 3.895 3.575 .390
054 PC2-054P 3.995 3.675 .390
056 PC2-056P 4.095 3.775 .390
058 PC2-058P 4.195 3.875 .390
060 PC2-060P 4.295 3.975 .390
062 PC2-062P 4.395 4.075 .390
064 PC2-064P 4.495 4.175 .390
066 PC2-066P 4.595 4.275 .390
068 PC2-068P 4.695 4.375 .390
070 PC2-070P 4.795 4.475 .390
072 PC2-072P 4.895 4.575 .390
074 PC2-074P 4.995 4.675 .390
076 PC2-076P 5.095 4.775 .390
078 PC2-078P 5.195 4.875 .390
080 PC2-080P 5.295 4.975 .390
082 PC2-082P 5.395 5.075 .390
084 PC2-084P 5.495 5.175 .390
086 PC2-086P 5.595 5.275 .390
088 PC2-088P 5.695 5.375 .390
090 PC2-090P 5.795 5.475 .390
092 PC2-092P 5.895 5.575 .390
094 PC2-094P 5.995 5.675 .390
096 PC2-096P 6.095 5.775 .390
098 PC2-098P 6.195 5.875 .390
100 PC2-100P 6.295 5.975 .390
102 PC2-102P 6.395 6.075 .390
104 PC2-104P 6.495 6.175 .390
106 PC2-106P 6.595 6.275 .390
108 PC2-108P 6.695 6.375 .390
110 PC2-110P 6.795 6.475 .390
22
Low Mating Force
PC connector
3 row contact arrangements
Number
of
Contacts PC
Number* A
Max.
B C
Max.
030 PC3-030P 2.295 1.975 .490
033 PC3-033P 2.395 2.075 .490
036 PC3-036P 2.495 2.175 .490
039 PC3-039P 2.595 2.275 .490
042 PC3-042P 2.695 2.375 .490
045 PC3-045P 2.795 2.475 .490
048 PC3-048P 2.895 2.575 .490
051 PC3-051P 2.995 2.675 .490
054 PC3-054P 3.095 2.775 .490
057 PC3-057P 3.195 2.875 .490
060 PC3-060P 3.295 2.975 .490
063 PC3-063P 3.395 3.075 .490
066 PC3-066P 3.495 3.175 .490
069 PC3-069P 3.595 3.275 .490
072 PC3-072P 3.695 3.375 .490
075 PC3-075P 3.795 3.475 .490
078 PC3-078P 3.895 3.575 .490
081 PC3-081P 3.995 3.675 .490
084 PC3-084P 4.095 3.775 .490
087 PC3-087P 4.195 3.875 .490
090 PC3-090P 4.295 3.975 .490
093 PC3-093P 4.395 4.075 .490
096 PC3-096P 4.495 4.175 .490
099 PC3-099P 4.595 4.275 .490
102 PC3-102P 4.695 4.375 .490
105 PC3-105P 4.795 4.475 .490
108 PC3-108P 4.895 4.575 .490
111 PC3-111P 4.995 4.675 .490
114 PC3-114P 5.095 4.775 .490
117 PC3-117P 5.195 4.875 .490
120 PC3-120P 5.295 4.975 .490
123 PC3-123P 5.395 5.075 .490
126 PC3-126P 5.495 5.175 .490
129 PC3-129P 5.595 5.275 .490
132 PC3-132P 5.695 5.375 .490
135 PC3-135P 5.795 5.475 .490
138 PC3-138P 5.895 5.575 .490
141 PC3-141P 5.995 5.675 .490
144 PC3-144P 6.095 5.775 .490
147 PC3-147P 6.195 5.875 .490
150 PC3-150P 6.295 5.975 .490
153 PC3-153P 6.395 6.075 .490
156 PC3-156P 6.495 6.175 .490
159 PC3-159P 6.595 6.275 .490
162 PC3-162P 6.695 6.375 .490
165 PC3-165P 6.795 6.475 .490
Number
of
Contacts PC
Number* A
Max.
B C
Max.
168 PC3-168P 6.895 6.575 .490
171 PC3-171P 6.995 6.675 .490
174 PC3-174P 7.095 6.775 .490
177 PC3-177P 7.195 6.875 .490
180 PC3-180P 7.295 6.975 .490
183 PC3-183P 7.395 7.075 .490
186 PC3-186P 7.495 7.175 .490
189 PC3-189P 7.595 7.275 .490
192 PC3-192P 7.695 7.375 .490
195 PC3-195P 7.795 7.475 .490
198 PC3-198P 7.895 7.575 .490
201 PC3-201P 7.995 7.675 .490
204 PC3-204P 8.095 7.775 .490
207 PC3-207P 8.195 7.875 .490
210 PC3-210P 8.295 7.975 .490
213 PC3-213P 8.395 8.075 .490
216 PC3-216P 8.495 8.175 .490
219 PC3-219P 8.595 8.275 .490
222 PC3-222P 8.695 8.375 .490
225 PC3-225P 8.795 8.475 .490
228 PC3-228P 8.895 8.575 .490
231 PC3-231P 8.995 8.675 .490
234 PC3-234P 9.095 8.775 .490
237 PC3-237P 9.195 8.875 .490
240 PC3-240P 9.295 8.975 .490
243 PC3-243P 9.395 9.075 .490
246 PC3-246P 9.495 9.175 .490
249 PC3-249P 9.595 9.275 .490
252 PC3-252P 9.695 9.375 .490
255 PC3-255P 9.795 9.475 .490
258 PC3-258P 9.895 9.575 .490
261 PC3-261P 9.995 9.675 .490
264 PC3-264P 10.095 9.775 .490
267 PC3-267P 10.195 9.875 .490
270 PC3-270P 10.295 9.975 .490
273 PC3-273P 10.395 10.075 .490
276 PC3-276P 10.495 10.175 .490
279 PC3-279P 10.595 10.275 .490
282 PC3-282P 10.695 10.375 .490
285 PC3-285P 10.795 10.475 .490
288 PC3-288P 10.895 10.575 .490
291 PC3-291P 10.995 10.675 .490
294 PC3-294P 11.095 10.775 .490
279 PC3-297P 11.195 10.875 .490
300 PC3-300P 11.295 10.975 .490
*See How to Order, pages 3, 4 and 5
23
Low Mating Force
PC connector
4 row contact arrangements
Number
of
Contacts PC
Number* A
Max.
B C
Max.
224 PC4-224P 6.895 6.575 .590
228 PC4-228P 6.995 6.675 .590
232 PC4-232P 7.095 6.775 .590
236 PC4-236P 7.195 6.875 .590
240 PC4-240P 7.295 6.975 .590
244 PC4-244P 7.395 7.075 .590
248 PC4-248P 7.495 7.175 .590
252 PC4-252P 7.595 7.275 .590
256 PC4-256P 7.695 7.375 .590
260 PC4-260P 7.795 7.475 .590
264 PC4-264P 7.895 7.575 .590
268 PC4-268P 7.995 7.675 .590
272 PC4-272P 8.095 7.775 .590
276 PC4-276P 8.195 7.875 .590
280 PC4-280P 8.295 7.975 .590
284 PC4-284P 8.395 8.075 .590
288 PC4-288P 8.495 8.175 .590
292 PC4-292P 8.595 8.275 .590
296 PC4-296P 8.695 8.375 .590
300 PC4-300P 8.795 8.475 .590
304 PC4-304P 8.895 8.575 .590
308 PC4-308P 8.995 8.675 .590
312 PC4-312P 9.095 8.775 .590
316 PC4-316P 9.195 8.875 .590
320 PC4-320P 9.295 8.975 .590
324 PC4-324P 9.395 9.075 .590
328 PC4-328P 9.495 9.175 .590
332 PC4-332P 9.595 9.275 .590
336 PC4-336P 9.695 9.375 .590
340 PC4-340P 9.795 9.475 .590
344 PC4-344P 9.895 9.575 .590
348 PC4-348P 9.995 9.675 .590
352 PC4-352P 10.095 9.775 .590
356 PC4-356P 10.195 9.875 .590
360 PC4-360P 10.295 9.975 .590
364 PC4-364P 10.395 10.075 .590
368 PC4-368P 10.495 10.175 .590
372 PC4-372P 10.595 10.275 .590
376 PC4-376P 10.695 10.375 .590
380 PC4-380P 10.795 10.475 .590
384 PC4-384P 10.895 10.575 .590
388 PC4-388P 10.995 10.675 .590
392 PC4-392P 11.095 10.775 .590
396 PC4-396P 11.195 10.875 .590
400 PC4-400P 11.295 10.975 .590
*See How to Order, pages 3, 4 and 5
Number
of
Contacts PC
Number* A
Max.
B C
Max.
040 PC4-040P 2.295 1.975 .590
044 PC4-044P 2.395 2.075 .590
048 PC4-048P 2.495 2.175 .590
052 PC4-052P 2.595 2.275 .590
056 PC4-056P 2.695 2.375 .590
060 PC4-060P 2.795 2.475 .590
064 PC4-064P 2.895 2.575 .590
068 PC4-068P 2.995 2.675 .590
072 PC4-072P 3.095 2.775 .590
076 PC4-076P 3.195 2.875 .590
080 PC4-080P 3.295 2.975 .590
084 PC4-084P 3.395 3.075 .590
088 PC4-088P 3.495 3.175 .590
092 PC4-092P 3.595 3.275 .590
096 PC4-096P 3.695 3.375 .590
100 PC4-100P 3.795 3.475 .590
104 PC4-104P 3.895 3.575 .590
108 PC4-108P 3.995 3.675 .590
112 PC4-112P 4.095 3.775 .590
116 PC4-116P 4.195 3.875 .590
120 PC4-120P 4.295 3.975 .590
124 PC4-124P 4.395 4.075 .590
128 PC4-128P 4.495 4.175 .590
132 PC4-132P 4.595 4.275 .590
136 PC4-136P 4.695 4.375 .590
140 PC4-140P 4.795 4.475 .590
144 PC4-144P 4.895 4.575 .590
148 PC4-148P 4.995 4.675 .590
152 PC4-152P 5.095 4.775 .590
156 PC4-156P 5.195 4.875 .590
160 PC4-160P 5.295 4.975 .590
164 PC4-164P 5.395 5.075 .590
168 PC4-168P 5.495 5.175 .590
172 PC4-172P 5.595 5.275 .590
176 PC4-176P 5.695 5.375 .590
180 PC4-180P 5.795 5.475 .590
184 PC4-184P 5.895 5.575 .590
188 PC4-188P 5.995 5.675 .590
192 PC4-192P 6.095 5.775 .590
196 PC4-196P 6.195 5.875 .590
200 PC4-200P 6.295 5.975 .590
204 PC4-204P 6.395 6.075 .590
208 PC4-208P 6.495 6.175 .590
212 PC4-212P 6.595 6.275 .590
216 PC4-216P 6.695 6.375 .590
220 PC4-220P 6.795 6.475 .590
24
POLARIZATION KEYS
Polarization Keys, 10-285422-2 are accessory items, ordered
separately for MB, DB, IO and PC Series Low Mating Force
Connectors. If used, 4 keys are required per connector half. See
page 5 for ordering information.
Examples at right show key locations for mating con nector
halves. The number or letter designations on all mating
connectors are arranged so that the pro jecting keys on one
relate to the same numbers or letters on the other. With the
numbers or letters matching, the connector will mate.
Low Mating Force Connector Accessories
polarization keys
KEY LOCATIONS
MOTHER BOARD OR PC CONNECTORS
KEY LOCATIONS
DAUGHTER BOARD OR INPUT/OUTPUT CONNECTORS
TYPICAL CODE SEQUENCE
B, H –1, 5
4 Different possibilities
at each position = 256
KEY
K
E
Y
3
6 8 5
7
2
1
4
KEY
K
E
Y
CA
FH
G
B
E
D
KEY
K
E
Y
6
5
4
8
31
2
7
KEY
K
E
Y
F
CA B
D
E
HG
Key Locations 1 – 5
Mates with
Key Locations 1 – 5
Key Locations B – H
Mates with
Key Locations B – H
Designates Interior
Key Positions Flat side of Key is Positioned
next to the Letter or Number
Designation
DAUGHTER BOARD CONNECTOR
WITH POLARIZATION KEYS
General information follows on this page and the next three pages
for assembling connector accessories with Amphenol® Low
Mating Force B3 Brush Contact Connectors.* Provided are
suggestions for proper connector installation that will help to
maintain connector straightness after equipment assembly.
Low mating force connector bodies are intentionally designed to
be non-rigid to facilitate application variables such as compliance
to printed circuit boards, xtures and card cages, vibration and
shock exposure, thermal excursions and differential expansion
characteristics. Users may employ installation procedures that
will provide mating surface straightness of these non-rigid bodies
within 0.010 inch to ensure maximum connector performance.
Generally, no external board support structures are required with
B3 brush contact connectors as long as the mounting surface
offers sufcient rigidity. However, longer installations should
consider external support to prevent excessive exing of the
connector/printed circuit board assembly.
* Installation Instructions for B3 Low Mating Force Connectors had
formerly been covered in publication L-1220. This has been discontin-
ued and all installation instructions are covered here on pages 24-29.
CONNECTOR ACCESSORIES THAT ARE USED WITH B3
BRUSH CONNECTORS INCLUDE:
Locking screws for •I/O connector mounting to board
Locking/mounting bushings: •
• for PC connector mounting to board or mating to I/O
connector
• for MB connector mounting to board or mating to I/O
connector
Polarization keys for each style connector provide up to • 256 different key locations for alternate keying
Test Probe kits for ensuring that contacts are properly • wired within a connector and to prevent damage to brush
contacts during probing.
For How to Order Accessories see page 5.
B3 brush PC style connectors are shipped with PC tail combs
that not only protect the tails during shipment, but aid the
person assembling the connectors to boards to align the
contacts.
Refer to page 2 of this catalog for illustration of the connector
styles and how they mate.
25
Low Mating Force Connector Accessories
test probe kit
In order to insure that contacts are properly wired
within a connector, a Test Probe Kit is needed (Part
number to order is 11-10400-22). This kit is espe-
cially designed to prevent damage to brush contacts
during probing. It con sists of a plastic holder, insert,
and two contacts, usable for either Mother Board or
Daughter Board applications. It is recommended
that the user buy two kits, if using connectors of two
genders. The kits are not convertible after assem-
bly.
Instructions:
DB-IO Test Probe - Slide the insert back over the
wire and crimp contact on.
Follow crimping proce dure
below. Then snap the insert
and contact assembly into
the holder.
MB-PC Test probe - Slide holder over wire and
then crimp contact. Follow
crimp ing procedure below.
Slide the insert on the
contact and seat it against
the shoulder. Slide the
holder forward and snap it
onto the insert.
Crimping Procedure: Using accepted industry
pro cedures, strip wire end to be terminated 1/8 to
5/32 inch. Care should be taken not to nick wire
strands. Assemble the M22520/2-01 crimp tool and
the M22520/2-27 positioner, and place tool selector
in correct setting for wire size. Selected wire size
must not have an insulation diameter more
than .062 for MB-PC and not more than .038 for
DB/IO.
AWG 22 24 26 28
SEL 5 4 3 2
Insert stripped wire end into contact wire well.
Strands should be visible in wire well inspection
hole. Bottom contact and wire assembly in posi-
tioner, and close handles of crimp tool to complete
crimp. Handles will not open unless full crimping
cycle has been completed.
DAUGHTER BOARD - INPUT/OUTPUT TEST PROBE
MOTHER BOARD - PC TEST PROBE
.038
DIA. MIN.
.18
±.03 .675 MAX.
.072
±.025
.125
DIA. MAX.
.675 MAX. .18
±.03
.113 – .146
.110
DIA. MAX.
.062
DIA. MIN.
26
BRUSH CONNECTORS USER APPLICATION
INFORMATION
The Brush B3 connector is a highly sophisticated, innovative low
mating force device designed to provide a multiplicity or highly
redundant number of contact sites for high density, high
performance applications. Contact resistance is stable and low,
approximately 1/3 lower than the most widely available contem-
porary two piece printed circuit card connector type. To maxi-
mize the B3 connector capability and assure the greatest
potential reliability, several guidelines should be followed.
Ideally, connectors should be fully mated and not used as a
packaging system tolerance absorber. Full mating occurs when
the two molded thermoplastic contact housings (connector
bodies) touch, plug skirt to receptacle shoulder over the entire
length of the connector. However, manufacturing tolerances and
user installation procedures must be considered and can be
expected to prevent the “ideal” situation.
Connector bodies were intentionally designed to be non-rigid as
permanent exibility is necessary to allow compliance to user
printed circuit cards, xtures and card cages. Vibration and
shock exposure, thermal excursions, contact repairability, and
differential expansion characteristics further dictate the desir-
ability of exible connectors.
Amphenol drawing call-outs of part atness to a 0.010 inch FIM
(Total Indicator Reading - Full Indicator Movement) over the
mating surface length is to be interpreted as in an “as used”
condition. Rigid mounting of Mother Board (plug) parts to
frames, multi-layer printed circuit boards or back panels should
consider the need for the 0.010 inch maximum condition after
soldering or solderless wrapping procedures.
Normal Mother Board parts in an unrestrained, unused condition
may exceed the “as used” 0.010 inch reading at normal ambient
or storage environments. Thermal cycling may further aggravate
or adjust the condition. These parts present a prole from at to
a “smile” appearance when viewed from the side with the mating
surface uppermost. (For example, see photo above). Normal
positioning of this part on the Mother Board with slight restraint
through use of mounting hardware or standard mounting bolts
will automatically allow part compliance to the atness condition
of the board. Slight restraint is urged to allow for differential
thermal expansion compensation during preheating and
soldering operations. Final torquing or permanent fastening
should be effected after cool down and thermal neutralization.
Normal solderless wrapping procedures could ignore the
differential expansion consideration.
Daughter Board connectors present the same at to “smile”
prole in a free state with the mating surface downward. The
relief shelf can be used as a reference or guide when used with
a straight edged Daughter Board or printed circuit board “page”.
Once proper positioning is veried and contact tails are solder
xed to the plated through holes, straightness will be perma-
nently retained.
Low Mating Force Connector Installation
DAUGHTER BOARD AND MOTHER BOARD
FULLY MATED CONDITION
Users are urged to monitor the quality of connector installation
to optimize the mating of connectors.
During usage and when mated the worst case condition of the
“as used” 0.010 inch maximum reading of both the plug and
receptacle could cause a maximum gap between plug and
receptacle moldings of 0.020 inch. This condition is well within
the B3 product mated performance goals as our minimum
effective electrical contact engagement has greater than a
100% safety factor. Users are urged to monitor the quality of
connector installation to optimize the mating of connectors.
Input/Output connectors also normally exhibit a at to “smile”
prole with the mating surface downward. This “smile” condition
self corrects once mated with the Mother Board counterpart and
accessory locking screws are fastened. Again, checking for the
0.020 inch maximum gap is urged as a quality control monitor of
user application techniques.
Amphenol has attempted to design in the ultimate for connector
compliancy and self-correction during normal user installation
procedures. The connector capabilities and inherent reliability
rely in part on practical user procedures and application
considerations. Refer to pages 27 - 29 for other installation
instructions. And, refer to page 2 for correct mating of low
mating force connectors. Amphenol board level engineers and
product specialists are available to assist the user with applica-
tion recommendations and processing guidance. Give us a call
at 607-563-5011 and ask for board level technical assistance if
further information is needed.
27
MOTHER BOARD CONNECTOR
MB connectors that are mounted on printed circuit boards should be
installed on the board and held somewhat loosely, yet assuring all
connector molding standoff pads contact the surface of the board,
prior to soldering. There are several methods for attaching the MB
connector to the board.
Inserting locking/mounting bushings with an arbor press is shown in
the top photo at right. Locking/mounting bushing accessory, two per
connector, may be inserted into 0.185 inch diameter CSK holes at
each end of the front of a MB connector body. (Part number to order
locking/mounting bushing is 10-41196-3). Using a light arbor press
or similar device, rmly press the knurled section of the bushing into
the lower 0.122 inch diameter hole until the front of the bushing is
ush with, or slightly below, the front surface of the MB connector.
Refer to Figure 1 at right.
Make sure the bushing and hole axis are properly aligned. Avoid
excessive force which may crack the back surface of the MB
connector body.
The back of the locking/mounting bushing has a 4–40 UNC-2A THD
to mount the connector. Fasten the connector with a suitable washer
and nut. The front of the locking/mounting bushing has a 4–40
UNC-2B THD which will mate with the locking screw accessory of an
IO connector.
Low Mating Force Connector Installation
LOCKING/MOUNTING BUSHING ACCESSORY INSERTED
INTO MB CONNECTOR BODY
FIGURE 1:
ASSEMBLY OF LOCKING/MOUNTING BUSHING
INTO MB CONNECTOR
FIGURE 2: MB CONNECTOR WITH CLINCH NUT MOUNTING
When a Daughter Board is mated, use a 4–40 screw of appropriate
length with a suitable washer under the head. Insert the screw from
the front of the connector through the 0.185 inch diameter CSK into
the 0.122 inch diameter hole at each end of the connector and fasten
with a suitable washer and nut. (Refer to Figure 3 below). Torque to
5.5 pound-inch maximum after soldering operation has been
completed.
If MB connectors are to be wave soldered to printed circuit
boards, the boards should be xtured to maintain assembly
straightness prior to and during the wave soldering process.
(Refer to Figure 4 below).
Alternate Mounting Variations for Mother Board Connector
A clinch nut (such as all ESNA 79NCFMA2-26 or equiva lent may be
pressed from the front, knurled end rst, through the 0.185 diameter
CSK into the 0.122 inch diameter hole at each end of the connector.
An appropriate length 2–56 UNC-3A screw, washer, and nut may be
used to mount the con nector. Mounting forces should be applied to
the bushing toward the rear of the connector. (See Figure 2 below)
BUSHING (2 PER CONNECTOR)
0.000 – 0.010 INCH
0.066 INCH MAX.
TO FULL THREAD
0.200 ±0.025 INCH (P/N 10-411196-3)
0.350 ±0.025 INCH (P/N 10-411196-5)
MB CONNECTOR
FIGURE 3: MB CONNECTOR WITH SCREW MOUNTING
CLINCH NUT
(2 PER CONNECTOR)
MB CONNECTOR
PRESS TO SHOULDER
FILLISTER HEAD SCREW
MUST NOT EXTEND
BEYOND TOP OF HOLE
MB CONNECTOR
WASHER
MB CONNECTOR
CIRCUIT BOARDCONNECTOR
TOUCHING BOARD
PAD (OPTIONAL)
MAINTAIN BOARD
STRAIGHTNESS
FIXTURE
FIGURE 4: TYPICAL FIXTURE FOR SOLDERING
MB CONNECTORS
28
CIRCUIT
BOARD
CIRCUIT
BOARD
DAUGHTER
BOARD
CONNECTOR
MOTHER BOARD
CONNECTOR
FULLY MATED
DAUGHTER BOARD CONNECTOR
DB connectors should be loosely held on the printed circuit board
prior to and during wave soldering. Care must be taken to ensure
that the board does not bow away from the center of the connector
during the soldering process. Also, especially on long length
daughter board connectors, care must be taken that the connector
does not bow on the circuit board. (Refer to Figure 5.)
Low Mating Force Connector Installation
LOCKING BUSHING ACCESSORY INSERTED INTO
PC CONNECTOR BODY
FIGURE 5: AVOID BOWING OF CIRCUIT BOARD
AND/OR CONNECTOR WHEN ASSEMBLING DB CONNECTOR
CIRCUIT BOARD
EDGE VIEW
DAUGHTERBOARD CONNECTOR
FACE VIEW
AVOID BOWING
OF CIRCUIT BOARD
AVOID BOWING
OF CONNECTOR
DAUGHTERBOARD CONNECTOR
SIDE VIEW
CIRCUIT BOARD
PC CONNECTOR
The PC connector should be loosely attached to the printed circuit
board prior to any soldering of contacts.
Locking bushing accessory, two per connector, may be inserted from
the back of a PC connector body into large mounting holes at each
end. See photo at right. Part number to order locking bushing
accessory for PC connectors is 10-411196-4.The 0.126 inch
diameter cross holes in the locking bushing must be aligned with the
0.126 inch diameter cross hole in the PC connector body. These
holes accept a 4–40 UNC-2A screw which should be long enough to
allow mounting to the board. Fasten with a suitable washer and nut,
making sure an appropriate washer is also under the head.
The front of the locking bushing has a 4–40 UNC-2B thread which
will mate with the locking bushing accessory of an IO connector.
FIGURE 6: THREE TYPICAL MASKING APPLICATIONS FOR SOLDERING DB CONNECTORS
After soldering, mounting screws should be properly
torqued.
For cosmetic purposes, the board side of the DB
connector can be masked prior to wave soldering to
protect it from heat exposure and solder wash.
Acceptable masking may be accomplished with split
tubing, stainless steel, or Mystik Tape #7010 or #7367.
(Refer to Figure 6).
Printed wiring boards with DB connectors attached
should be inserted into the housing until rmly seated.
If possible, visual observation of the MB/DB mated
condition is recommended. The fully mated condition
occurs when the DB connector skirt bottoms on the MB
or PC connector shoulder along the full length. (Refer
to Figure 7).
Printed circuit boards should be supported in card
guides and locked in position when connectors are fully
mated.
FIGURE 7: MB CONNECTOR & DB CONNECTOR
IN FULLY MATED CONDITION
CIRCUIT
BOARD APPLY TAPE TO
THIS SURFACE
DB CONNECTOR
SPLIT TUBING
(HIGH TEMPERATURE RESISTING ELASTOMER)
DB CONNECTOR
END
CIRCUIT BOARD
FORMED STAINLESS STEEL SHIELD
DB CONNECTOR
END
CIRCUIT BOARD
29
Low Mating Force Connector Installation
LOCKING SCREW ACCESSORY INSERTED INTO
IO CONNECTOR BODY
PC CONNECTOR, CONT.
The mounting surface to which the connector is applied
should not extend forward of the shoulder of the PC
connector. If the mounting surface does extend beyond
the shoulder, a shim (minimum 0.005 inch thick) must be
inserted between the connector body and the mounting
surface. (Refer to Figure 8). After soldering, mounting
screws should be properly torqued.
Fixturing of the PC connector and mounting surface may
be desirable to assure straightness after wave soldering.
INPUT/OUTPUT CONNECTOR
Use of mating hardware, such as locking screws, is recommended
with I/O connectors. See photo at right. Locking screw accessory, two
per connector, may be inserted into the large holes at each end of the
back of an IO connector body. Part number to order locking screw
accessory is 10-411196-4. By hand, press the locking screw rmly
down into the cavity until it reaches a positive stop. The locking screw
is then captivated in the retention system of the cavity. The front of
the locking screw has a 4-40 UNC-2A thread which will mate with the
locking bushing accessories of MB or PC connectors. (Refer to Figure
9 for I/O locking screw dimensions).
Should it be necessary to remove the captivated lock ing screw
accessory, push the screw as far forward as possi ble. Using vise grip
pliers to grasp the threaded end and pliers to hold the knurled end,
apply torque until the locking screw breaks in two. Each half will then
drop out.
Alternate Mounting Variation for Input/Output Connectors
For xed mounting, a 6-32 thread forming screw, type AB (MS5186)
may be inserted through the mounting member and into the holes at
each end of the connector body from the back. The screws must be
used with suitable washers and must be of sufcient length to
penetrate the connector body 0.350 inch. Care must be taken not to
over-tighten the screws.
FIGURE 8: PC CONNECTOR MOUNTING
FIGURE 9: I/O LOCKING SCREW DIMENSIONS
Visual observation of the mating of the MB connector to the I/O
connector or the PC connector to the I/O connector is recommend-
ed. The fully mated condition occurs when the I/O connector skirt
bottoms on the MB or PC shoulder along the full length. (Refer to
Figure 10).
INPUT/OUTPUT
CONNECTOR
MATING
CONNECTOR
LOCKING SCREW
(2 PER CONNECTOR)
MAX. 0.650 INCH
WHEN FULLY
ASSEMBLED TO
MATING
CONNECTOR
Printed circuit boards containing PC connectors that
are mating with I/O connectors should utilize a
holding device that is capable of locking the board
in place to prevent back-off during use.
FIGURE 10: MB CONNECTOR & I/O CONNECTOR
FULLY MATED CONDITION
MOTHER
BOARD
CONNECTOR
FULLY MATED
INPUT/
OUTPUT
CONNECTOR
CIRCUIT
BOARD
CIRCUIT BOARD
USE A
0.005 INCH
SHIM OR
WASHER
IF MOUNTING
SURFACE EXTENDS
BEYOND SHOULDER OF
CONNECTOR
CIRCUIT BOARD
PC
CONNECTOR
SHOULDER
PC
CONNECTOR
SHOULDER
30
Low Mating Force Connector
Smaller Sizes with .100 X .100 Sq. Inch Grid
design exibility
To meet more customer needs and provide more
design exibility, Amphenol expanded their low
mating force connector family with smaller contact
count connectors (sizes with less than standard 10
contacts per row). These are available with as few as
10 brush contacts per connector and up to 36 brush
contacts per connector. The arrangements are in the
same .100 X .100 square inch grid pattern as stan-
dard low mating force connectors. They are offered in
mother board, daughter board, input/output and
printed circuit styles. (Shown on this page and the
following page). For how to order information please
consult Amphenol Aerospace. LOW MATING FORCE CONNECTORS IN SMALLER SIZES
Mother Board Connector
Number
of
Contacts Contact
Pattern A
Max.
B C
Max.
10 2 Row X 5 1.795 1.475 .390
12 2 Row X 6 1.895 1.575 .390
14 2 Row X 7 1.995 1.675 .390
15 3 Row X 5 1.795 1.475 .490
16 2 Row X 8 2.095 1.775 .390
18 2 Row X 9 2.195 1.875 .390
3 Row X 6 1.895 1.575 .490
20 4 Row X 5 1.795 1.475 .590
21 3 Row X 7 1.995 1.675 .490
24 3 Row X 8 2.095 1.775 .490
4 Row X 6 1.895 1.575 .590
27 3 Row X 9 2.195 1.875 .490
28 4 Row X 7 1.995 1.675 .590
32 4 Row X 8 2.095 1.775 .590
36 4 Row X 9 2.195 1.875 .590
Daughter Board Connector
Number
of
Contacts Contact
Pattern A
Max.
B C
Max. D
Max.
10 2 Row X 5 1.180 .850 .375 .545
12 2 Row X 6 1.280 .950 .375 .545
14 2 Row X 7 1.380 1.050 .375 .545
15 3 Row X 5 1.180 .850 .475 .645
16 2 Row X 8 1.480 1.150 .375 .545
18 2 Row X 9 1.580 1.250 .375 .545
3 Row X 6 1.280 .950 .475 .645
20 4 Row X 5 1.180 .850 .575 .745
21 3 Row X 7 1.380 1.050 .475 .645
24 3 Row X 8 1.480 1.150 .475 .645
4 Row X 6 1.280 .950 .575 .745
27 3 Row X 9 1.580 1.250 .475 .645
28 4 Row X 7 1.380 1.050 .575 .745
32 4 Row X 8 1.480 1.150 .575 .745
36 4 Row X 9 1.580 1.250 .575 .745
E
Tail Length
±.020
.148
.180
.335
Mother Board Connector
E
Tail Length
±.020
.085
.120
.300
Daughter Board Connector
.220 X .075 DEEP
(ACCOMMODATES HEX NUT
.187 MAX. ACROSS FLATS &
.205 MIN. ACROSS CORNERS)
A
CE
TAIL LENGTH
.021 ±.002 DIA.
.020 M
D
.285 ±.005
.075 +.005
–.000
B
.400
.096 DIA.
.020 M
+.005
–.000
A
B
C
.122+.005
–.000
.010 M
DIA.
.193 MAX.
.365+.002
–.007 .021 ±.002 DIA.
.020 M
E
TAIL LENGTH
4-40
UNC-2B
4-40
UNC-2A
.365
.200 ±.025
LOCKING/MOUNTING BUSHING
(10-411196-3)
FOR MATING WITH
INPUT/OUTPUT CONNECTOR,
ACCESSORY ITEM**
** Accessory item supplied separately. See Accessory How to Order
page 5 and page 27 for alternate mounting methods.
31
Low Mating Force Connector
Smaller Sizes, cont.
design exibility
Input/Output Connector
Number
of
Contacts Contact
Pattern A
Max.
B C
Max.
10 2 Row X 5 1.795 1.475 .390
12 2 Row X 6 1.895 1.575 .390
14 2 Row X 7 1.995 1.675 .390
15 3 Row X 5 1.795 1.475 .490
16 2 Row X 8 2.095 1.775 .390
18 2 Row X 9 2.195 1.875 .390
3 Row X 6 1.895 1.575 .490
20 4 Row X 5 1.795 1.475 .590
21 3 Row X 7 1.995 1.675 .490
24 3 Row X 8 2.095 1.775 .490
4 Row X 6 1.895 1.575 .590
27 3 Row X 9 2.195 1.875 .490
28 4 Row X 7 1.995 1.675 .590
32 4 Row X 8 2.095 1.775 .590
36 4 Row X 9 2.195 1.875 .590
Printed Circuit Connector
Number
of
Contacts Contact
Pattern A
Max.
B C
Max. D
Max.
10 2 Row X 5 1.180 .850 .375 .545
12 2 Row X 6 1.280 .950 .375 .545
14 2 Row X 7 1.380 1.050 .375 .545
15 3 Row X 5 1.180 .850 .475 .645
16 2 Row X 8 1.480 1.150 .375 .545
18 2 Row X 9 1.580 1.250 .375 .545
3 Row X 6 1.280 .950 .475 .645
20 4 Row X 5 1.180 .850 .575 .745
21 3 Row X 7 1.380 1.050 .475 .645
24 3 Row X 8 1.480 1.150 .475 .645
4 Row X 6 1.280 .950 .575 .745
27 3 Row X 9 1.580 1.250 .475 .645
28 4 Row X 7 1.380 1.050 .575 .745
32 4 Row X 8 1.480 1.150 .575 .745
36 4 Row X 9 1.580 1.250 .575 .745
Contact
Type
K
Dia.
±.020
E
Tail Length
±.020
Rear Removable
Crimp Contact N/A N/A
Round PCB Stud
Solder
Termination
.021 .145
.021 .335
Input/Output Connector
Printed Circuit Connector
A
B
C
.540
MAX. .670
MAX.
K DIA. E
TAIL LENGTH
.220 DIA.
.785 MAX.
UNMATED
FREE
LENGTH
.650 MAX.
WHEN FULLY
ASSEMBLED TO
MATING CONNECTOR
LOCKING SCREW
10-502599
ACCESSORY ITEM**
4-40
UNC-2A .445 MAX.
UNMATED
FREE LENGTH
.31 MAX.
WHEN FULLY
ASSEMBLED
TO MATING CONNECTOR
.220 DIA.
LOCKING SCREW
10-502599-2
ACCESSORY ITEM**
.365 .410
.105
USE #4
MOUNTING SCREW
4-40
UNC-2B LOCKING BUSHING
FOR MATING WITH INPUT/
OUTPUT CONNECTOR,
ACCESSORY ITEM **
A
B
.100
C
.185+.005
–.002
.020 M
DIA.
.021 ±.002 DIA.
.012 M
.021 ±.002 DIA.
.365+.002
–.007
.193 MAX.
E
TAIL
LENGTH
.200
.100
E
Tail Length
±.020
.095
.150
** Accessory item supplied separately. See Accessory How to
Order page 5 and page 27 for alternate mounting methods.
32
The B3 Brush contact is the standard contact for Low
mating force connectors due to its low mating force,
stable electrical performance and extended service
life. Design exibility is expanded with the ability to add
combinations of other types of contacts: signal, power,
high speed coax or ber optic termini; in one high
density hybrid connector.
Power, shielded coax or twinax contacts, in combina-
tion with Brush signal contacts are available in congu-
rations of the following (see next page for illustrations):
A single row of size 16 power or coax or twinax • contacts with 2 rows of brush contacts
A single row of size 12 power or coax or twinax • contacts with 3 rows of brush contacts
A double row of size 16 power or coax or twinax • contacts with 4 rows of brush contacts
Power and coax contacts are standard MIL-
DTL-38999 Series II type. Consult Amphenol board
level product marketing (800-678-0141) for assistance
with available hybrid congurations.
NOTE: Power and coax contacts and ber optic
termini are not provided with the connector and must
be purchased separately.
CONNECTOR WITH BRUSH CONTACTS & SIZE 16 POWER PIN CONTACTS
COMBINATION OF BRUSH CONTACTS &
MS29504 FIBER OPTIC TERMINI
HYBRID BRUSH CONNECTORS WITH FIBER
OPTIC TERMINI
Amphenol’s superiority and breadth of product
offering is demonstrated in its capability for packag-
ing ber termini and the Brush contact in a printed
circuit board rectangular connector. Fiber optic
MIL-PRF-29504 termini size 16 and HD20 can be
used as well as the 90° termini style with optical
performance the same as when used in cylindrical
connectors.
For more information on Amphenol ber optic
connectors and termini, see the Fiber Optic section of
Amphenol’s Combined Circular Interconnects catalog
on-line at www.amphenol-aerospace.com.
Hybrid Congurations with Contact Options
signal, power, coax or ber optics
POWER STRIP RECTANGULARS WITH SIZE 16 POWER CONTACTS
POWER STRIP CONNECTORS
Amphenol’s Power Strip connectors were developed
for use as a dedicated power interface between
module cards and backplanes. These connectors use
the same insert bodies as Amphenol low mating force
connectors, but have power contacts rather than brush
contacts. Cavities allow for size 16 or 12 power
contacts. Or, coax/twinax contacts can also be used in
these size 16 or 12 cavities.
COMBINATION OF BRUSH CONTACTS &
SHIELDED CONTACTS
33
Custom Hybrid Designs,
Small Color-Coded Brush Connectors
design exibility
Amphenol can meet innovative connector solutions with
custom designs. Our board level engineers can work with
customers who need special contact arrangements or special
sized inserts.
The special hybrid connector shown at right was developed
for the Vetronics System on a military tank. This custom
shape insert design houses a combination of contact types, a
sealing grommet and it has special mounting/locking screws.
HYBRID CUSTOM CONNECTOR WITH
75 BRUSH DIGITAL CONTACTS,
26 SIZE 16 POWER CONTACTS & 2 SIZE 04 POWER CONTACTS
The following shows a few hybrid congura-
tion connectors that have been developed.
Consult Amphenol Aerospace for assistance
in solving design problems and for part
numbers that will provide the proper
combination of these hybrid congurations
to meet your specic connector application
requirements.
Hybrid: 15 B3 Brush contacts, 4 size 12 power/coax/twinax contacts
Hybrid: 30 B3 brush contacts, 10 size 12 power/coax/twinax contacts
SMALL COLOR-CODED BRUSH CONTACT
CONNECTORS DESIGNED FOR MEDICAL
INSTRUMENTATION
Amphenol has responded to the needs of the medical
industry by offering even smaller inserts with brush contacts.
These small prole, but highly reliable interconnects, are
ideal for medical and test equipment such as patient monitor-
ing systems. Color coding of these connectors was a market-
driven requirement for frequent plugging and unplugging on
equipment, so Amphenol provides these small sized brush
connectors in a variety of color materials.
SMALL COLOR-CODED BRUSH CONNECTORS WITH AS
FEW AS 5 CONTACTS PER CONNECTOR
Hybrid: 30 B3 brush contacts,
6 size 12 power/coax/twinax contacts
Hybrid: 40 B3 brush contacts, 16 size 16 power/coax/twinax contacts
Hybrid: 40 B3 Brush contacts,
4 size 16 power/coax/twinax contacts
Hybrid: 10 B3 brush contacts, 4 size 16 power/coax/twinax contacts
34
Other Brush Contact Rectangular Connectors
Docking Connectors
with (.0787 inch X .100 inch) staggered grid spacing
BRUSH CONTACT CONNECTORS MAKE THE IDEAL
CHOICE FOR FREQUENT DOCKING APPLICATIONS
When frequent docking to charge and transfer data is a
necessity, the brush contact system offers high
performance of over 100,000 mating cycles. This long
contact life without degradation in performance
provides customers with reliability in frequent docking
applications such as:
Performance
Durability: . . . . . . . . Up to 100,000 mating cycles
Insertion/Extraction Force: . 1.5 ounce typical per contact
Operating Temperature: . -65° to 125°C
Current Rating: . . . . . Up to 5 amperes (termination dependent)
Hot swap 1 ampere maximum (load
dependent)
Data Rate
(Select connectors only): . Congurable for 3.125 Gbps differential signal
Insulation Resistance:. . . 5 gigaohms minimum
Dielectric Withstanding
Voltage: . . . . . . . . . 750 volts @ sea level minimum
250 volts @ 70,000 feet elevation min.
Solderability: . . . . . . . MIL-STD-202, method 208
Salt Fog: . . . . . . . . 48 hours IAW MIL-STD-1344, method
1002, type II
Humidity: . . . . . . . . IAW MIL-STD-1344, method 1002, type II
Vibration: . . . . . . . . 4 hours in each of 3 mutually perpendicular
axes IAW MIL-STD-1344, method 2004, test
condition G
Shock: . . . . . . . . . 1 shock along each of three mutually
perpendicular axes IAW MIL-STD-1344,
method 2004, test condition G
Features
Radial Misalignment: . . . Capable of correcting up to a .040” initial
radial misalignment
Angular Misalignment: . . Capable of mating with up to a 4° initial
angular misalignment
Polarization: . . . . . . . “D” shaped interface
Color:. . . . . . . . . . Standard is black, variety of other colors are
available
Materials
Insulator: . . . . . . . . Glass-lled thermoplastic molding
Contact: Wire . . . . . Beryllium copper per ASTM B197; nish is
gold per ASTM B488 over nickel per AMS-
QQ-N-290
Holder . . . . Brass similar to UNS C33500; nish is gold
per MIL-G-45204 or tin-lead per MIL-P-81728
or tin per MIL-T-10727 (RoHS compliant
Sleeve:. . . . Stainless steel per AMS-5514,
passivated IAW QQ-P-35
(DB and I/O connectors only)
Amphenol offers Docking Connectors in a compact
size, with tighter spaced custom brush contacts
(.0787 inch x .100 inch staggered grid spacing).
• Handheld GPS units
• Handheld radios
• Rugged computers
• Controllers
• Scanners
• Accessories
• Cellular phones
2.165 1.056
.486
.079
.551
.021 ±.002 DIA. .250
1.614
.100
.0787
.276
± .005 DIA.
.100
.0394
1.413 1.180
.461
.512
.059 .021
±.002 DIA.
.0787
Mother Board Docking Connector
Daughter Board Docking Connector
For more information, including how to order, consult
Amphenol Aerospace. Call 800-678-0141 and ask for Amphenol
board level product marketing for assistance.
35
Other Brush Contact Rectangular Connectors
HDB3 High Density Brush Series -
tighter (.070 in. X .060 in.) staggered grid spacing
HDB3 CONNECTORS
The new connector series of brush connectors incor-
porates an even higher density contact pattern and
lower mated height than Amphenol’s standard low mat-
ing force rectangular connectors. These HDB3 con-
nectors utilize the same durable and reliable B3 brush
contact, but in a tighter .070 inch X .060 inch staggered
grid spacing. They offer the advantage of a higher
density pattern in a compact-height connector that will
take up less board space; thus saving cost over adding
additional connectors to meet power requirements.
HDB3 connector styles include mother board, daughter
board, input/output and a stacker style.
For how to order information of the HDB3 see Amphe-
nol brochure SL-402* online at www.amphenol-aero-
space.com.
Mother Board/Daughter Board HDB3 Connector
Number
of
Contacts Contact
Pattern A
Max. C
Max.
40 4 Row X 10 1.375 1.075
60 4 Row X 15 1.725 1.425
80 4 Row X 20 2.075 1.775
120 4 Row X 30 2.775 2.475
160 4 Row X40 3.475 3.175
Mother Board HDB3 Connector Daughter Board HDB3 Connector
When more contact density is required, the HDB3 High Density Series
with .070 inch X .060 inch staggered grid spacing is the solution.
* Also in SL-402 brochure are other HDB3 style connectors: input/output style, stacker and high speed congurations.
Please note, the new Amphenol Combined Rectangular Products catalog, 12-R1, will combined 12-035 (this catalog)
and HDB3 product covered in SL-402, along with other Amphenol rectangular interconnect products. Ask for the new
combined Amphenol Rectangular Interconnect Products catalog; available Jan. 2011
CA
.325
.540
.350
.350
.410
.470
.530
C
E
±.020
CONNECTOR
MOUNTING
SURFACE
E ±.020
TYP
123
654
PIN 1
ABC
FED
.035
TYP.
.070
TYP.
.086 MIN. DIA.
THRU HOLE
(USE NO. 2 SCREW)
.350 .086 MIN. DIA.
THRU HOLE
(USE NO. 2 SCREW)
PIN 1
C
A
.335 MAX.
.150 ±.005
.150 ±.020
TYP.
.016 ±.001
TYP.
.195 MIN. HEX
.070 MIN DEEP
(USE 3/16 HEX HEAD)
.090 TYP.
.030 TYP.
4
65
123
D
FE
ABC
36
Other Brush Contact Rectangular Connectors
HSB3 High Density Series with
3.125 Gb/s High Speed data rate
For more information refer to Amphenol® brochure SL-402, on-line
at www.amphenol-aerospace.com. or call 800-678-0141 and ask
for Amphenol board level product marketing for assistance.
HSB3 CONNECTORS
The HSB3 is a further new development of the higher density HDB3
connector series. The HSB3 offers higher speed as well as higher
density. Benets include:
Allows data rates up to 3.125 Gb/s via 100 ohm matched • impedance differential pairs
Uses partially populated HDB• 3 mother board and daughter
board inserts. See HSB3 arrangements below.
HSB3 HIGH DENSITY/HIGH SPEED BRUSH CONNECTOR
HSB3 Insert Arrangements
5
6
11
23
4E
F
ABC
D
5
6
11
23
4E
F
ABC
D
40 Pin Body with 3 Differential Pair, 20 Signal Contacts
80 Pin Body with 7 Differential Pair, 40 Signal Contacts
As viewed from front face of Daughter Board Connector
120 Pin Body with 10 Differential Pair, 60 Signal Contacts
160 Pin Body with 13 Differential Pair, 80 Signal Contacts
5
6
11
23
4E
F
ABC
D
5
6
123
4E
F
ABC
D
1
5
6
123
4E
F
ABC
D
1
60 Pin Body with 5 Differential Pair, 30 Signal Contacts
100 Ohm Differential Pair Contacts
Empty Contact Cavity
Standard Digital, Low Speed Signal Contacts
(100 Ohm Differential contact pairs capable of 3.125 Gb/s data rates)
KEY
37
Other Brush Contact Rectangular Connectors
Ruggedized, Non-Floating Brush Rack and Panel
Connectors
This new connector series utilizes Amphenol’s durable and reliable B3 contact system
in a rugged, non-oating Rack and Panel connector. Included in this series are digital
and power/digital “hybrid” insert arrangements.
Standard Ruggedized, Non-
oating Brush Rack and Panel
Connector Features include:
126 high performance B• 3
brush contacts
0.100 inch x 0.100 inch •
square grid footprint
Environmentally sealed at • connector interface with
mated (optional feature)
Environmentally sealed • connector mounting interface
EMI protection is available at • mounting surfaces and
connector interface
ESD protection is available • - allows use of Class 3
hardened chips (4KV max.
voltage)
BACKPLANE CONNECTOR MODULE CONNECTOR
Standard Ruggedized Brush Rack and Panel
Connector Performance:
Durability: 500 mating cycles•
Insertion/Extraction •Force: 7 lbs. typical
Operating Temp.: –60° to +125°C• Current Rating: 3 amperes •
Hot swap 1 ampere maximum (load
dependant) - non ESD protected version
Insulation Resistance: 1 gagohm minimum• Dielectric •
Withstanding Voltage: 500V, 60 Hz RMS @ sea level
300V, 60 Hz RMS @ 15,000 ft. elevation
Solderability: J-STD-004, -005 & -006•
Salt Fog: EIA-364-26B, test condition B•
Humidity: EIA-364-31B, test method III•
Vibration: EIA-364-28B, test condition III•
Shock: EIA-364-27B, test condition G•
Hybrid arrangements are available as shown in top photo at right, that
utilize a combination of brush contacts and high power RADSOK®
contacts. The photo shows a 74 signal and 6 power conguration. For
other hybrid arrangements and assistance on how to order this
product, consult Amphenol Aerospace.
HYBRD RUGGEDIZED, NON-FLOATING
RACK & PANEL CONNECTOR
(8 RADSOK® HIGH POWER CONTACTS, 72 BRUSH CONTACTS)
2 BAY SHELL CONFIGURATION
RUGGEDIZED, NON-FLOATING RACK AND PANEL CONNECTOR
(126 BRUSH CONTACTS PER BAY)
38
Other Brush Contact Rectangular Connectors
LRM (Line Replaceable Modules)
AMPHENOL CONTINUES TO DEVELOP
INTERCONNECTS THAT MEET THE DEMANDS OF
THE AVIONICS INDUSTRY
Starting with the development of the B3 contact, incorpo-
rated into the low mating force PCB connectors, the LRM
line replaceable module followed as the avionics high
density rectangular interconnect solution. LRM intercon-
nects are combinations of module and backplane inserts,
in one bay, two bay, three bay or more congurations.
LRM products are used on major programs of aircraft and
military vehicles.
This page and the next briey describe the LRM family of
connectors. For complete information please see
Amphenol® High Performance Line Replaceable Module
(LRM) Interconnects catalog, 12-037.*
180 Brush contacts in a Staggered Grid
module insert mounted to a PC Board
STAGGERED GRID LRM CONNECTORS
The Brush contact has superior performance in LRM
interconnects due to its low mating force, stable electrical
performance and extended life. Other LRM features
include:
Backplane versatility: available with through-hole solder • posts or with compliant pins for solderless applications
Wide range of PCB/heat sink accommodations with •
standard surface mount tails or ex termination
Polarization keys - up to 4096 possible keying positions• Superior intermittancy-free performance under vibration• Dielectric withstanding voltage: Staggered grid and •
GEN-X styles: 100 volts at sea level (due to the
incorporation of ESD shield)
Temperature range: suitable for vapor phase soldering; •
normal operating temp. is –65°C to +125°C
Current rating: 3.0A derated to 1.5A typical (dependant •on loading)
LRM CONNECTORS WITH STAGGERED GRID
Provides higher contact density for high speed •
integrated circuitry in SEM-E and custom form factors
180 contact insert pattern grid in 8 rows: 0.100 inch •spacing along the row with 0.050 inch between rows,
rows offset 0.050 inch
Options include various shell designs to accommo-•
date a wide range of PC board/heat sink combinations
Solder tail, wire wrap or compliant contact availability•
Amphenol ESD (Electrostatic Discharge) protection: • Utilization of the Faraday Cage principal to shunt
electrostatic discharge events to the conductive enclo-
sure on which the connector is mounted, thus never
allowing the high voltage, high current discharge
event to reside on any contacts.
Designed for level 2 (ight line) maintenance•
Provides routing channels for backplane•
LRM CONNECTORS WITH STAGGERED GRID
AIRFLOW-THRU CONTACT PATTERN
Accommodate standard B• 3 tails in staggered pattern,
but with increased spacing in the center, and also
provide more airow cooling of inserts; for use with
wider boards, up to 0.425 inch
GEN-X GRID LRM CONNECTOR
LRM CONNECTORS WITH GEN-X GRID
Even higher contact density than staggered grid and improved • electrical performance
All the feature of the 180 contact pattern, including ESD protection•
Available in SEM-E and custom form factors• 236 contact pattern grid in 8 rows: 0.075 inch spacing along the row •with 0.060 inch between rows, rows offset 0.0375 inch
* Amphenol LRM Catalog, 12-037, is on-line at www.amphenol-
aerospace.com. Please note that Amphenol’s New Combined
Rectangular Catalog (available Jan. 2011) will include LRM
interconnects. Call Amphenol Aerospace (800-678-0141) for
more information.
39
Other Brush Contact Rectangular Connectors
LRM Hybrids and High Speed LRM Gigastak
& Digastak Inserts
LRM INTERCONNECTS (SHOWN FROM TOP TO BOTTOM):
LRM Backplane, 2 bays of staggered B• 3 brush contacts and inserts for
size 12 coax contacts
LRM Module with Fiber Optic MT ferrules in one insert and B• 3 Brush in
a differential pair insert
LRM inserts with PC tails•
LRM mating Module and Backplane with MT-PRF-29504 Fiber optic •
termini and B3 Brush contacts
LRM OPTIONAL HYBRID DESIGNS
Custom combinations of digital contacts and ber •
optic termini. Optical performance of ber optic termini
within LRM connectors are the same as termini used
in cylindrical connectors.** Insertion losses range from
.3dB to <1.5dB depending upon launch conditions,
ber NA, ber size and the type of termination. LRM
connectors are available with ber optic termini in the
following congurations:
• Modied MIL-PRF-29504/4, /5, MIL-PRF-14 &
MIL-PF-15 termini - size 16, straight and 90
degree styles
• MT ferrule (2-24 ber lines per ferrule)
• Hybrid arrangements with ber optic and other
contact types
LRM inserts with RF contacts•
LRM power supply modules with 270VDC sections • which are capable of providing corona-free operation
at 100,000 ft.
Designs with high speed shielded contacts - coax, •
triax, twinax, differential twinax, and quadrax contacts
Combinations of power contact, standard brush, high •
power, differential pair brush and ber optic termini
New designs that utilizes the RADSOK• ® high amper-
age socket contact with inserts.
The RADSOK® design is a socket cylinder within the
female contact which has several equally spaced
longitudinal beams twisted into a hyperbolic shape. As
the male pin is inserted, axial members in the female
half deect, imparting high current ow across the
connection with minimal voltage loss. This twisted
hyperbolic grid ensures a large coaxial, face-to-face
surface area engagement.
Incorporation of ex circuits for more versatility of PC • board terminations
Custom shells with multiple bay congurations•
Backplane shell grounding capabilities•
HIGH SPEED LRM GIGASTAK AND DIGASTAK
INSERTS
More and more speed is needed in today’s interconnec-
tion products. Amphenol has recently developed a new
family of high speed LRM connectors that are capable of
achieving data rates in excess of 6.25 Gbps via 100 ohm
matched impedance differential pairs. Each insert
arrangement has been optimized through strategic place-
ment of signal and ground contacts for the perfect
balance of impedance control and cross talk mitigation
for a given data rate. As an enhancement over the
standard LRM, this new series offers a unique solderless
termination to module cards via Amphenol Intercon’s
cStack technology.
** For more information on Amphenol ber optic connectors and
termini, see the Fiber Optic section of Amphenol’s Combined Circular
Interconnects catalog, on-line at www.amphenol-aerospace.com.
HIGH SPEED LRM GIGASTAK AND DIGASTAK INSERTS
40
Other Amphenol Rectangular Connectors
Total packaging with Amphenol Printed Circuit
Boards, Rectangular and Cylindrical Connectors
AMPHENOL PRINTED CIRCUIT BOARDS
AMPHENOL PRINTED CIRCUIT BOARD CAPABILITIES
Amphenol Printed Circuits’ capabilities are among the world’s broadest and
most advanced, delivering consistent quality and reliability for demanding high
bandwidth systems and mission critical applications. Designs of printed circuit
boards are available from Amphenol APC with a wide variety of materials,
formation types, panel sizes and layer counts.
AMPHENOL FLEX CIRCUIT ASSEMBLIES
Amphenol Printed Circuits’ capabilities also includes the design and manufac-
ture of ex circuits used to attach cylindrical and rectangular connectors to PCB
boards. Sculptured® Flexible Circuits with built-in terminations eliminate the
failures associated with crimped or soldered-on contacts. Flex geometrically ts
tight space requirements and eliminates the need to purchase and attach
individual pins or connectors.
Consult APC, Amphenol Printed Circuits, for more information on
printed circuit boards and ex assemblies. Phone: 603-324-4500
FLEX CIRCUITRY WITH RECTANGULAR
CONNECTORS
INTEGRATED SYSTEM PACKAGING
Amphenol can provide system solutions - everything you need
inside and outside the box: Interconnect products, printed circuit
boards, backplane assemblies, heat-sinks and metal enclosures.
Amphenol also provides value added assembly including bussing;
full system assembly including chassis build and sub-system
integration and testing. The breadth of Amphenol’s products and
the proven expertise of being a world-wide interconnect product
leader makes Amphenol the premier choice for system-level
packaging. For more information on integrated systems, call:
Amphenol Aerospace at 800-678-0141
Amphenol Backplane Systems at 888-318-3553
AMPHENOL INTEGRATED SYSTEMS
BOARD LEVEL CONNECTOR WITH COMPLIANT PIN
QUADRAX CONTACTS
BOARD LEVEL CONNECTORS WITH QUADRAX CONTACTS
Amphenol leads in the electrical connector arena in offering a wide range of
interconnects that provide high speed transmission and operate in high
frequency conditions. The photo at right shows a board level connector with 4
size 8 quadrax compliant contacts. This will accomodate a backplane of .125
inch min. thickness. Consult Amphenol Aerospace for more information.
VIPER® INTERCONNECTS
Amphenol Backplane Systems (ABS)
developed the VIPER interconnect platform
to provide a ruggedized and high density
modular connector solution that can scale to
higher bandwidths; from 80 Mbps to over 10
Gpbs. Features and benets of the VIPER
include:
Designed for 10+ Gbps data rate • performance
100 ohm impedance for differential pair •
in a 1.8mm x 1.35mm grid
Press-t termination compliant pins•
Backplane modules available in 8 & 16 •
row increments, 1.8mm x 1.8mm grid
Fully footprint-compatible with VITA 46 & VITA 48 standards•
ESD protection•
Consult Amphenol Backplane Systems for more information.
Phone: 603-883-5100
VIPER® CONNECTORS
An example integrated system box, shown at right, includes the following Amphenol
interconnect products:
Circulars: D38999 cylindrical connectors with MT ber optics, RJ Field connectors• Rectangulars: LRM interconnects, NAFI connectors, UHD connectors • Rectangulars: ARINC 600 connectors, Micro-D Subminiature connectors•
Rectangulars: HDB3 high density brush contact connectors•
Backplane Systems, Flex Circuitry, metal enclosure•
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Amphenol:
M55302/169B172 M55302/169B102 M55302/169B353 M55302/166C46Y1 DB2-200P(706) DB4-192P
M55302/166B10Y1 M55302/166B34Z1 M55302/166B67Y1 M55302/166C41Y1 M55302/168B22Z1
M55302/170B10Z1 M55302/172-01 M55302/172-02 M55302/172-03 M55302/172-04 M55302/78-02 MB4-
060P(701) MB4-064P(702) MB4-192P(709) MB4-220P(758) MB4-232P(702) MB3-153W(700) M55302/166C55X2
M55302/166C80X1 MB4-192P(758) M55302/169C302 DB4-232P(769) M55302/169A251 M55302/169C452 DB4-
200P PC4-200P DB4-160P (706) DB2-030P(701) PC2-020P (701) DB2-074P (700) PC3-165P(749)
M55302/169B604 MB2-126P (701) MB2-078P (709) DB3-030P (700) MB2-174W (700) DB4-296P (705) MB3-
165P(727) PC3-051P (717) IO3-153P (720) PC3-240P (701) MB4-280P (701) DB4-204P (705) MB4-324W (715)
IO3-219P (701) IO2-098P (720) IO2-076P (700) MB3-030P (704) MB4-336P (700) DB2-180P (701) MB4-364W
(711) DB2-034P (705) PC3-270P (717) MB3-063P (709) MB4-196P (703) DB3-132P (707) IO4-100P (700) DB2-
198P (716) MB2-148P (722) MB4-104P (709) IO2-120P MB4-252P (702) DB4-352P (700) IO3-120P (700) IO4-
388P MB2-074W (700) DB2-066P (706) MB4-084W (700) MB3-291P (703) MB4-276P (722) IO3-159P (701) MB2-
020P (719) MB2-102P (722) DB3-102P(746) IO3-189P (700) IO2-058P (713) MB2-048W (715) MB3-267W (700)
IO3-090P (701) IO2-102P (701) MB4-248W (710) DB4-168P (714) DB3-045P (706) MB4-316P (703) PC2-184P
(700) IO2-158P (713) MB3-207W (700) DB3-276P (705) DB4-380P (714) DB3-099P (700) DB3-114P (706) MB3-
171W (710) IO3-225C (701) DB2-056P (709)