PERFECT Ex-cable gland 50.6xx PAzz/EX
Configuration
Dome nut Polyamide PA6
Dust cap Polyethylene PE-LD
Sealing ring / outer
part Polychloroprene-Nitrile rubber CR/NBR
Sealing ring / inner
part Evoprene TPE (from M20x1,5)
Gland body Polyamide PA6
Connecting thread metric, as per EN 60423
Properties
• wide sealing and clamping
range
• integrated anchorage
• easy-to-install
Equipment group II
Category / Zone 2G, 2D and 3G/ 1, 2, 21, 22
Type of protection Ex e, increased safety
Ex tD A21 - Protection by enclosures
Cable installation fixed
Temperature range -20°C / +70 (M12 und M16)°C
Further information on page 23
-30°C / +70 (M20 bis M63)°C
Protection grade IP66
Test standard EN 60079-0 / EN 60079-7
EN 61241-0 / EN 61241-1
EC-Type certificate PTB 99 ATEX 3101 X (M12 und M16)
PTB 99 ATEX 3128 X (M20 bis M63)
IECEx certificate IECEx PTB 05.0004x
Features
RAL 9005
Connecting thread standard length
A ØC L SW1 SW2 H Part No.
mm mm mm mm mm Piece
M12x1,5 4 - 7 8 15 15 31 100 50.612 PASW/EX
M16x1,5 5,5 - 10 8 20 20 35,5 100 50.616 PASW/EX
M20x1,5 5,5 - 13 8 24 24 37 100 50.620 PASW/EX
M25x1,5 8 - 17 8 29 29 43 50 50.625 PASW/EX
www.hylec-apl.com
A ØC L SW1 SW2 H Part No.
mm mm mm mm mm Piece
M32x1,5 12 - 21 10 36 36 50 25 50.632 PASW/EX
M40x1,5 17 - 28 10 46 46 51 10 50.640 PASW/EX
M50x1,5 22 - 35 12 55 55 61,5 5 50.650 PASW/EX
M63x1,5 27 - 48 12 68 68 65,5 5 50.663 PASW/EX
Connecting thread long
A ØC L SW1 SW2 H Part No.
mm mm mm mm mm Piece
M12x1,5 4 - 7 12 15 15 35 100 50.612 PASWL/EX
M16x1,5 5,5 - 10 12 20 20 39,5 100 50.616 PASWL/EX
M20x1,5 5,5 - 13 13 24 24 42 100 50.620 PASWL/EX
M25x1,5 8 - 17 13 29 29 48 50 50.625 PASWL/EX
M32x1,5 12 - 21 15 36 36 55 25 50.632 PASWL/EX
M40x1,5 17 - 28 15 46 46 56 10 50.640 PASWL/EX
M50x1,5 22 - 35 16 55 55 65,5 5 50.650 PASWL/EX
M63x1,5 27 - 48 16 68 68 69,5 5 50.663 PASWL/EX
RAL 5015
Connecting thread standard length
A ØC L SW1 SW2 H Part No.
mm mm mm mm mm Piece
M12x1,5 4 - 7 8 15 15 31 100 50.612 PABL/EX
M16x1,5 5,5 - 10 8 20 20 35,5 100 50.616 PABL/EX
M20x1,5 5,5 - 13 8 24 24 37 100 50.620 PABL/EX
M25x1,5 8 - 17 8 29 29 43 50 50.625 PABL/EX
M32x1,5 12 - 21 10 36 36 50 25 50.632 PABL/EX
M40x1,5 17 - 28 10 46 46 51 10 50.640 PABL/EX
M50x1,5 22 - 35 12 55 55 61,5 5 50.650 PABL/EX
M63x1,5 27 - 48 12 68 68 65,5 5 50.663 PABL/EX
Connecting thread long
www.hylec-apl.com
A ØC L SW1 SW2 H Part No.
mm mm mm mm mm Piece
M12x1,5 4 - 7 12 15 15 35 100 50.612 PABL/L/EX
M16x1,5 5,5 - 10 12 20 20 39,5 100 50.616 PABL/L/EX
M20x1,5 5,5 - 13 13 24 24 42 100 50.620 PABL/L/EX
M25x1,5 8 - 17 13 29 29 48 50 50.625 PABL/L/EX
M32x1,5 12 - 21 15 36 36 55 25 50.632 PABL/L/EX
M40x1,5 17 - 28 15 46 46 56 10 50.640 PABL/L/EX
M50x1,5 22 - 35 16 55 55 65,5 5 50.650 PABL/L/EX
M63x1,5 27 - 48 16 68 68 69,5 5 50.663 PABL/L/EX
Blue dome nut = specific marking for type of protection Ex i - intrinsic safety
www.hylec-apl.com
