SIOV metal oxide varistors Leaded varistors, SuperioR-MP, S20 series Series/Type: B722* Date: April 2011 (c) EPCOS AG 2011. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Leaded varistors B722* SuperioR-MP, S20 series Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned copper wire Features Wide operating voltage range 130 ... 680 VRMS All types duty cycle @ 6 kV/ 3 kA = >10 pulses, according to IEC 60950-1 Annex Q; IEC 61051-2 All types Inom @ 5 kA = >15 impulses according to UL 1449, 3rd Edition surge current generator (8/20 s), Type 2 listed Multiple pulse handling capability Approvals UL CSA (all types 320 VRMS) VDE IEC Delivery mode Bulk (standard), taped versions on reel or in Ammo pack upon request. For further details refer chapter "Taping, packaging and lead configuration" for leaded varistors. General technical data Climatic category Operating temperature Storage temperature Electric strength Insulation resistance Response time Please read Cautions and warnings and Important notes at the end of this document. to IEC 60068-1 to IEC 61051 to IEC 61051 to IEC 61051 Page 2 of 22 40/85/56 40 ... + 85 40 ... +125 2.5 100 < 25 C C kVRMS M ns Leaded varistors B722* SuperioR-MP, S20 series Electrical specifications and ordering codes Maximum ratings (TA = 85 C) Ordering code B72220P3131K101 B72220P3141K101 B72220P3151K101 B72220P3171K101 B72220P3211K101 B72220P3231K101 B72220P3251K101 B72220P3271K101 B72220P3301K101 B72220P3321K101 B72220P3351K101 B72220P3381K101 B72220P3421K101 B72220P3461K101 B72220P3511K101 B72220P3551K101 B72220P3621K101 B72220P3681K101 Type (untaped) SIOVS20K130E3K1 S20K140E3K1 S20K150E3K1 S20K175E3K1 S20K210E3K1 S20K230E3K1 S20K250E3K1 S20K275E3K1 S20K300E3K1 S20K320E3K1 S20K350E3K1 S20K385E3K1 S20K420E3K1 S20K460E3K1 S20K510E3K1 S20K550E3K1 S20K620E3K1 S20K680E3K1 Characteristics (TA = 25 C) Type Ordering code (untaped) SIOVB72220P3131K101 S20K130E3K1 B72220P3141K101 S20K140E3K1 B72220P3151K101 S20K150E3K1 B72220P3171K101 S20K175E3K1 B72220P3211K101 S20K210E3K1 B72220P3231K101 S20K230E3K1 B72220P3251K101 S20K250E3K1 B72220P3271K101 S20K275E3K1 B72220P3301K101 S20K300E3K1 B72220P3321K101 S20K320E3K1 B72220P3351K101 S20K350E3K1 B72220P3381K101 S20K385E3K1 B72220P3421K101 S20K420E3K1 B72220P3461K101 S20K460E3K1 B72220P3511K101 S20K510E3K1 B72220P3551K101 S20K550E3K1 B72220P3621K101 S20K620E3K1 B72220P3681K101 S20K680E3K1 Please read Cautions and warnings and Important notes at the end of this document. VRMS VDC V 130 140 150 175 210 230 250 275 300 320 350 385 420 460 510 550 625 680 V 170 180 200 225 270 300 320 350 385 420 460 505 560 615 670 745 825 895 imax (8/20 s) A 12000 12000 12000 12000 12000 12000 12000 12000 12000 12000 12000 12000 12000 12000 10000 10000 10000 10000 Vv (1 mA) V 205 220 240 270 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 Vv (1 mA) % 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 vc,max (ic) V 340 360 395 455 545 595 650 710 775 840 910 1025 1120 1240 1355 1500 1650 1815 Page 3 of 22 Wmax (2 ms) J 135 145 155 180 215 235 255 280 305 330 335 370 405 445 445 490 540 595 ic A 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Pmax W 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Ctyp (1 kHz) pF 2400 2250 2050 1800 1500 1400 1300 1150 1050 1000 900 800 730 660 600 550 500 450 Leaded varistors B722* SuperioR-MP, S20 series Dimensional drawings Weight Nominal diameter mm VRMS V Weight g 20 130 ... 680 3.2 ... 10.2 The weight of varistors in between these voltage classes can be interpolated. Dimensions Ordering code B72220P3131K101 B72220P3141K101 B72220P3151K101 B72220P3171K101 B72220P3211K101 B72220P3231K101 B72220P3251K101 B72220P3271K101 B72220P3301K101 B72220P3321K101 B72220P3351K101 B72220P3381K101 B72220P3421K101 B72220P3461K101 B72220P3511K101 B72220P3551K101 B72220P3621K101 B72220P3681K101 [e] 1 mm 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 Please read Cautions and warnings and Important notes at the end of this document. a 1 mm 2.2 2.3 2.4 2.6 2.9 3.1 3.2 3.5 3.8 3.9 4.2 4.8 5.0 5.3 5.6 6.1 6.6 7.2 wmax mm 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 23.0 23.0 23.0 23.0 thmax mm 5.1 5.2 5.3 5.5 5.8 6.0 6.1 6.5 6.8 6.9 7.3 8.3 8.6 8.9 9.3 9.8 10.3 10.9 Page 4 of 22 hmax mm 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 27.5 27.5 27.5 28.0 28.0 28.0 28.0 lmin mm 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 d 0.05 mm 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Leaded varistors B722* SuperioR-MP, S20 series Reliability data Test Test methods/conditions Requirement Varistor voltage The voltage between two terminals with To meet the specified value the specified measuring current applied is called VV (1 mADC @ 0.2 ... 2 s). Clamping voltage The maximum voltage between two terminals with the specified standard impulse current (8/20 s) applied. To meet the specified value Endurance at upper category temperature 1000 h at UCT |V/V (1 mA)| 10% Surge current derating, 8/20 s 10 surge currents (8/20 s), unipolar, interval 30 s, amplitude corresponding to derating curve for 10 impulses at 20 s Surge current derating, 2 ms 10 surge currents (2 ms), unipolar, |V/V (1 mA)| 10% interval 120 s, amplitude corresponding (measured in direction of to derating curve for 10 impulses at surge current) 2 ms No visible damage Electric strength IEC 61051-1, test 4.9.2 After having continuously applied the maximum allowable AC voltage at UCT 2 C for 1000 h, the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. Metal balls method, 2500 VRMS, 60 s The varistor is placed in a container holding 1.6 0.2 mm diameter metal balls such that only the terminations of the varistor are protruding. The specified voltage shall be applied between both terminals of the specimen connected together and the electrode inserted between the metal balls. Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 22 |V/V (1 mA)| 10% (measured in direction of surge current) No visible damage No breakdown Leaded varistors B722* SuperioR-MP, S20 series Test Test methods/conditions Requirement Climatic sequence The specimen shall be subjected to: a) dry heat at UCT, 16 h, IEC 60068-2-2, test Ba b) damp heat, 1st cycle: 55 C, 93% r. H., 24 h, IEC 60068-2-30, test Db c) cold, LCT, 2 h, IEC 60068-2-1, test Aa d) damp heat, additional 5 cycles: 55 C/25 C, 93% r. H., 24 h/cycle, IEC 60068-2-30, test Db. |V/V (1 mA)| 10% Rins 100 M Then the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. Thereafter, insulation resistance Rins shall be measured at V = 500 V. Rapid change of temperature IEC 60068-2-14, test Na, LCT/UCT, dwell time 30 min, 5 cycles |V/V (1 mA)| 5% No visible damage Damp heat, steady state IEC 60068-2-78, test Ca |V/V (1 mA)| 10% The specimen shall be subjected to Rins 100 M 40 2 C, 90 to 95% r. H. for 56 days without load / with 10% of the maximum continuous DC operating voltage VDC. Then stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. Thereafter, insulation resistance Rins shall be measured at V = 500 V (insulated varistors only). Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 22 Leaded varistors B722* SuperioR-MP, S20 series Test Test methods/conditions Solderability IEC 60068-2-20, test Ta, Resistance to soldering heat IEC 60068-2-20, test Tb, method 1A, 260 C, 10 s: Requirement The inspection shall be carried out under adequate method 1 with modified conditions for light with normal eyesight or lead-free solder alloys: 245 C, 3 s: with the assistance of a After dipping the terminals to a depth of magnifier capable of giving approximately 3 mm from the body in a a magnification of 4 to soldering bath of 245 C for 3 s, the 10 times. The dipped terminals shall be visually examined. surface shall be covered with a smooth and bright solder coating with no more than small amounts of scattered imperfections such as pinholes or un-wetted or de-wetted areas. These imperfections shall not be concentrated in one area. |V/V (1 mA)| 5% No visible damage Each lead shall be dipped into a solder bath having a temperature of 260 5 C to a point 2.0 to 2.5 mm from the body of the specimen, be held there for 10 1 s and then be stored at room temperature and normal humidity for 1 to 2 h. The change of VV shall be measured and the specimen shall be visually examined. Tensile strength IEC 60068-2-21, test Ua1 |V/V (1 mA)| 5% After gradually applying the force specified below and keeping the unit fixed for 10 s, the terminal shall be visually examined for any damage. No break of solder joint, no wire break Force for wire diameter: 0.6 mm = 10 N 0.8 mm = 10 N 1.0 mm = 20 N Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 22 Leaded varistors B722* SuperioR-MP, S20 series Test Test methods/conditions Requirement Vibration IEC 60068-2-6, test Fc, method B4 Frequency range: 10 ... 55 Hz Amplitude: 0.75 mm or 98 m/s2 Duration: 6 h (3 * 2 h) Pulse: sine wave After repeatedly applying a single harmonic vibration according to the table above. The change of VV shall be measured and the specimen shall be visually examined. |V/V (1 mA)| 5% IEC 60068-2-29, test Eb Pulse duration: 6 ms Max. acceleration: 400 m/s2 Number of bumps: 4000 Pulse: half sine IEC 60695-11-5 (needle flame test) |V/V (1 mA)| 5% Bump Fire hazard Severity: vertical 10 s Note: UCT = Upper category temperature LCT = Lower category temperature Rins = Insulation resistance Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 22 No visible damage No visible damage 5 s max. Leaded varistors B722* SuperioR-MP, S20 series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S20 ... E3K1 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 22 Leaded varistors B722* SuperioR-MP, S20 series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S20K130 ... K320E3K1 SIOV-S20K350 ... K460E3K1 Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 22 Leaded varistors B722* SuperioR-MP, S20 series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S20K510 ... K680E3K1 Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 22 Leaded varistors B722* SuperioR-MP, S20 series Taping, packaging and lead configuration 1 EPCOS ordering code system For leaded varistors B722 10 S 2 271 K Monolithic varistor Nominal disc diameter Design: S = Leaded varistor T = ThermoFuse F = Fail-safe varistor Q = EnergetiQ Series: 0 = StandarD 1 = Automotive 2 = AdvanceD 3 = SuperioR 4 = SuperioR Max. AC operating voltage: 271 = 27 101 = 275 VAC 140 = 14 100 = 14 VAC 141 = 14 101 = 140 VAC Tolerance of varistor voltage: K = 10% J = 5% S = Special tolerance Lead configuration: 1 = Straight leads 2 thru 5 = Kinked form Packaging: 0 = Bulk, 1 thru 7 = Taping style Internal coding: 1 = Standard Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 22 1 0 1 Leaded varistors B722* SuperioR-MP, S20 series 2 Taping and packaging of leaded varistors Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = 7.5 and 10 the taping mode is based on this standard. 2.1 Taping in accordance with IEC 60286-2 for lead spacing 5.0 mm 2.2 Taping based on IEC 60286-2 for lead spacing 7.5 and 10 mm Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 22 Leaded varistors B722* SuperioR-MP, S20 series 2.3 Tape dimensions (in mm) Symbol w = 5.0 Tolerance th = 7.5 Tolerance = 10.0 Tolerance max. max. max. max. max. max. d P0 0.6 12.7 0.05 0.3 0.8 12.71) P1 F h p 3.85 5.0 0 0 0.7 +0.6/0.1 2.0 1.3 8.95 0.8 7.5 0.8 depends on s 0 2.0 W W0 18.0 5.5 0.5 min. 18.0 11.0 0.5 min. 18.0 11.0 0.5 min. W1 W2 H H0 9.0 3.0 18.0 16.0 (18.0) 32.2 4.0 0.9 11.0 4.0 0.5 max. +2.0/0 0.5 9.0 3.0 18.0 16.0 (18.0) 45.0 4.0 0.9 11.0 +0.75/0.5 max. +2.0/0 0.5 9.0 3.0 18.0 16.0 +0.75/0.5 max. +2.0/0 0.5 max. 0.2 max. max. 45.0 4.0 0.9 11.0 max. 0.2 max. max. H1 D0 t L l max. 0.2 max. max. max. 0.05 0.3 1.0 12.7 7.7 0.8 10.0 0.8 depends on s 0 2.0 1) Taping with P0 = 15.0 mm upon request 2) Applies only to uncrimped types 3) Applies only to crimped types (H0 = 18 upon request) Please read Cautions and warnings and Important notes at the end of this document. 0.05 0.3 Page 14 of 22 Remarks see tables in each series under "Dimensions" 1 mm/20 sprocket holes measured at top of component body Peel-off force > 5 N 2) 3) without lead Leaded varistors B722* SuperioR-MP, S20 series 2.4 Taping mode Example: B72210S0271K1 5 1 | Digit 14 Digit 14 Taping Reel type mode Seating plane height H0 for crimped types mm 0 Bulk 1 G I 16 2 G2 I 18 3 G3 II 16 4 G4 II 18 5 G5 III 16 6 GA Ammo pack 16 7 G2A Ammo pack 18 Internal coding for special taping G6 III 18 G10 II 16 G11 II 18 G10A Ammo pack 16 G11A Ammo pack 18 Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 22 Seating plane height H for uncrimped types mm 18 18 18 18 Pitch distance P0 mm 12.7 12.7 12.7 12.7 12.7 12.7 12.7 18 18 12.7 15.0 15.0 15.0 15.0 Leaded varistors B722* SuperioR-MP, S20 series 2.5 Reel dimension Dimensions (in mm) Reel type I II III d 360 max. 360 max. 500 max. f 31 1 31 1 23 1 n approx. 45 approx. 55 approx. 59 w 54 max. 64 max. 72 max. If reel type III is not compatible with insertion equipment because of its large diameter, nominal disk diameter 10 mm and 14 mm can be supplied on reel II upon request (taping mode G3). 2.6 Ammo pack dimensions Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 22 Leaded varistors B722* SuperioR-MP, S20 series 3 Lead configuration Straight leads are standard for disk varistors. Other lead configurations as crimp style or customer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. Crimped leads (non-standard) are differently crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below. The crimp styles of the individual types can be seen from the type designation in the ordering tables. 3.1 Crimp style mode Example: B72210S0271K 5 01 | Digit 13 Digit 13 of ordering code Crimp style Figure 1 Standard, straight leads 1 2 S2 2 3 S3 3 4 S4 4 5 S5 5 6 Available upon request Internal coding 3.2 Standard leads and non-standard crimp styles Standard, straight leads Non-standard, crimp style S2 Non-standard, crimp style S3 Figure 1 Figure 2 Figure 3 Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 22 Leaded varistors B722* SuperioR-MP, S20 series Non-standard, crimp style S4 Non-standard, crimp style S5 Figure 4 Figure 5 3.3 Component height (hmax) for crimped versions (non-standard) Due to technical reasons the component height (hmax) increases if a crimp is added. The maximum height of the crimped component can be found in the table below. Nominal diameter mm 5 5 VRMS V 11 ... 175 210 ... 460 Crimp style S2 S3 5.0 5.0 hmax mm 10.0 10.0 11 ... 175 210 ... 460 S2 S3 5.0 5.0 12.0 12.0 10 10 10 10 10 10 10 11 ... 300 320 ... 460 510 Automotive Automotive (D1 types) 11 ... 175 210 ... 460 S5 S3/S5 S3/S5 S5 S5 S4 S3 7.5 7.5 7.5 7.5 7.5 5.0 5.0 15.5 16.5 17.5 17.0 16.0 16.5 16.5 14 14 14 14 14 11 ... 300 320 ... 460 510 Automotive Automotive (D1 types) S5 S3/S5 S3/S5 S5 S5 7.5 7.5 7.5 7.5 7.5 20.0 20.0 21.5 21.0 20.0 20 20 11 ... 320 385 ... 510 S5 S5 10.0 10.0 27.0 27.5 7 7 Please read Cautions and warnings and Important notes at the end of this document. mm Page 18 of 22 Leaded varistors B722* SuperioR-MP, S20 series 3.4 Trimmed leads (non-standard) Varistors with cut leads available upon request. Lead length tolerances: Straight leads Crimped leads Minimum lead length +/1.0 mm +/0.8 mm 3.5 mm Figure 6 Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 22 Leaded varistors B722* SuperioR-MP, S20 series Cautions and warnings General 1. EPCOS metal oxide varistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless otherwise agreed with EPCOS during the design-in-phase. 2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should be evaluated taking into consideration worst-case conditions. 3. For applications of SIOVs in line-to-ground circuits based on various international and local standards there are restrictions existing or additional safety measures required. Storage 1. Store SIOVs only in original packaging. Do not open the package before storage. 2. Storage conditions in original packaging: Storage temperature: 25 C ... +45 C, Relative humidity: <75% annual average, <95% on maximum 30 days a year. Dew precipitation: is to be avoided. 3. Avoid contamination of an SIOV's during storage, handling and processing. 4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term operation (examples given under operation precautions). 5. The SIOV type series should be soldered within the time specified: SIOV-S, -Q, -LS, -B, -SFS 24 months ETFV 12 months. Handling 1. SIOVs must not be dropped. 2. Components must not be touched with bare hands. Gloves are recommended. 3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the sharp edge of SIOV electrodes. Soldering (where applicable) 1. Use rosin-type flux or non-activated flux. 2. Insufficient preheating may cause ceramic cracks. 3. Rapid cooling by dipping in solvent is not recommended. 4. Complete removal of flux is recommended. Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 22 Leaded varistors B722* SuperioR-MP, S20 series Mounting 1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic that will degrade the component's electrical characteristics. 2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this reason SIOVs should be physically shielded from adjacent components. Operation 1. Use SIOVs only within the specified temperature operating range. 2. Use SIOVs only within the specified voltage and current ranges. 3. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric conditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions.Contact with any liquids and solvents should be prevented. Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 22 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKK, MKD, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 22 of 22