For technical questions, contact: powertron@vishaypg.com
HTE Series
Powertron
Document Number: 64308
Revision: 20-09-10
www.powertron.de
1
Type Wattage Rating
( Watts )
Dimensions
(special dimensions possible) Maximum Working
Voltage (KV
ACrms))
A
±0.062” [±1.6mm]
B
±0.031” [±0.8mm]
C
±0.002” [±0.05mm]
HTE15 0.7 0.590 [15.0] 0.197 [5.0] 0.032 [0.8] 2.5
HTE19 1 0.748 [19.0] 0.197 [5.0] 0.032 [0.8] 3.5
HTE24 2 0.944 [24.0] 0.314 [8.0] 0.040 [1.0] 5.5
HTE25 1.2 1.00 [25.4] 0.197 [5.0] 0.032 [0.8] 5.5
HTE39 3 1.535 [39.0] 0.314 [8.0] 0.040 [1.0] 10
HTE52 5 2.05 [52.0] 0.314 [8.0] 0.040 [1.0] 15
HTE76 8 2.99 [76.0] 0.354 [9.0] 0.040 [1.0] 22.5
HTE102 12 4.02 [102] 0.354 [9.0] 0.040 [1.0] 32
HTE127 12 5.00 [127] 0.354 [9.0] 0.040 [1.0] 40
HTE152 15 5.98 [152] 0.354 [9.0] 0.040 [1.0] 48
Resistances from 200Ohms to 700MOhms•
Power Rating 0.7 to 17Watts•
Resistance Tolerances to ±1%•
Low TCR: ± 100ppm/K Standard•
Voltage Ratings to 48KV•
Non-Inductive Design•
SMD upon request•
SPECIFICATIONS
Part Number - Resistance - Tolerance - TCR ( If not standard )
Example: HTE39 10MOhm 1%
Ordering Information
For technical questions, contact: powertron@vishaypg.com
HTE Series
Powertron
Document Number: 64308
Revision: 20-09-10
www.powertron.de
2
SPECIFICATIONS (continued)
0 50 100 150 200 250 300 350 400
0
20
40
60
80
100
120
Power ( % )
Ambient Temperature (°C)
Power Derating Curve
Specication Value
Resistance Range 200 Ohms to 700MOhms
Tolerances ±1% to ±10%
Temperature Coefcient ±100ppm/K : -25°C to +125°C ( Standard )
±20 to ±150 ppm/K ( On Request )
Temperature Range -55°C to +195°C
Insulation Resistance >10000 MOhms
Encapsulation Epoxy Conformal Coating / silicon or glass upon request
Environmental Performance
(MIL-STD 202) DR
Load Life ±0.7%
Moisture Resistance ±0.4%
Thermal Shock ±0.4%
5X Overload ( 5s ) ±0.5%
Vishay Precision Group
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Legal Disclaimer Notice
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Legal Disclaimer Notice
Disclaimer
Document No.: 63999
Revision: 27-Apr-11