1
RHRG1540CC, RHRG1560CC
15A, 400V - 600V Hyperfast Dual Diodes
The RHRG1540CC and RHRG1560CC are hyperfast dual
diodes with soft recovery characteristics (trr < 35ns). They
have half the recovery time of ultrafast diodes and are silicon
nitride passivated ion-implanted epitaxial planar
construction.
These devices are intended for use as freewheeling/
clamping diodes and rectifiers in a variety of switching power
supplies and other power switching applications. Their low
stored charge and hyperfast soft recovery minimize ringing
and electrical noise in many power switching circuits
reducing power loss in the switching transistors.
Formerly developmental type TA49061.
Symbol
Features
• Hyperfast with Soft Recovery. . . . . . . . . . . . . . . . . < 35ns
• Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175oC
• Reverse Voltage Up To. . . . . . . . . . . . . . . . . . . . . . . .600V
• Avalanche Energy Rated
• Planar Construction
Applications
• Switching Power Supplies
• Power Switching Circuits
• General Purpose
Packaging JEDEC STYLE TO-247
Ordering Information
PART NUMBER PACKAGE BRAND
RHRG1540CC TO-247 RHRG1540C
RHRG1560CC TO-247 RHRG1560C
NOTE: When ordering, use the entire part number.
K
A1A2
CATHODE
(BOTTOM SIDE
ANODE 1
CATHODE
ANODE 2
METAL)
Absolute Maximum Ratings (Per Leg) TC = 25oC, Unless Otherwise Specified
RHRG1540CC RHRG1560CC UNITS
Peak Repetitive Reverse Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VRRM 400 600 V
Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM 400 600 V
DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR400 600 V
Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF(AV)
(TC = 140oC) 15 15 A
Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFRM
(Square Wave, 20kHz) 30 30 A
Nonrepetitive Peak Surge Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFSM
(Halfwave, 1 Phase, 60Hz) 200 200 A
Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD100 100 W
Avalanche Energy (See Figure 10 and 11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAVL 20 20 mJ
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSTG, TJ-65 to 175 -65 to 175 oC
Data Sheet January 2000 File Number 3684.2
1-888-INTERSIL or 321-724-7143 |Copyright © Intersil Corporation 2000
2
Electrical Specifications (Per Leg) TC = 25oC, Unless Otherwise Specified
SYMBOL TEST CONDITION
RHRG1540CC RHRG1560CC
UNITSMIN TYP MAX MIN TYP MAX
VFIF = 15A - - 2.1 - - 2.1 V
IF = 15A, TC = 150oC - - 1.7 - - 1.7 V
IRVR = 400V - - 100 - - - µA
VR = 600V - - - - - 100 µA
VR = 400V, TC = 150oC - - 500 - - - µA
VR = 600V, TC = 150oC -----500µA
trr IF = 1A, dIF/dt = 100A/µs--35--35ns
IF = 15A, dIF/dt = 100A/µs--40--40ns
taIF = 15A, dIF/dt = 100A/µs - 20 - - 20 - ns
tbIF = 15A, dIF/dt = 100A/µs - 15 - - 15 - ns
QRR IF = 15A, dIF/dt = 100A/µs - 40 - - 40 - nC
CJVR = 10V, IF = 0A - 60 - - 60 - pF
RθJC - - 1.5 - - 1.5 oC/W
DEFINITIONS
VF = Instantaneous forward voltage (pw = 300µs, D = 2%).
IR = Instantaneous reverse current.
trr = Reverse recovery time (See Figure 9), summation of ta + tb.
ta = Time to reach peak reverse current (See Figure 9).
tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 9).
QRR = Reverse Recovery Charge.
CJ = Junction Capacitance.
RθJC = Thermal resistance junction to case.
pw = pulse width.
D = duty cycle.
Typical Performance Curves
FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE
VF, FORWARD VOLTAGE (V)
IF, FORWARD CURRENT (A)
1
100
0.5
10
00.5 11.5 2 2.5 3
25oC
175oC
100oC
VR, REVERSE VOLTAGE (V)
0 200 400 600300 500
1000
0.01
0.1
1
10
100
100
25oC
100oC
175oC
IR, REVERSE CURRENT (µA)
RHRG1540CC, RHRG1560CC
3
FIGURE 3. trr, ta AND tb CURVES vs FORWARD CURRENT FIGURE 4. trr, ta AND tb CURVES vs FORWARD CURRENT
FIGURE 5. trr, ta AND tb CURVES vs FORWARD CURRENT FIGURE 6. CURRENT DERATING CURVE
FIGURE 7. JUNCTION CAPACITANCE vs REVERSE VOLTAGE
Typical Performance Curves (Continued)
IF, FORWARD CURRENT (A)
0.5
0
20
10
151
30
50
t, RECOVERY TIMES (ns)
10
tb
40
5
trr
ta
TC = 25oC, dIF/dt = 100A/µs
IF, FORWARD CURRENT (A)
0.5
0
40
20
151
60
100
t, RECOVERY TIMES (ns)
10
tb
80
5
trr
ta
TC = 100oC, dIF/dt = 100A/µs
IF, FORWARD CURRENT (A)
0.5
0
50
25
151
100
75
t, RECOVERY TIMES (ns)
10
tb
5
ta
125
150
175
trr
TC = 175oC, dIF/dt = 100A/µs
15
3
0100 115 145 175160
6
9
12
TC, CASE TEMPERATURE (oC)
IF(AV), AVERAGE FORWARD CURRENT (A)
130
DC
SQ. WAVE
VR, REVERSE VOLTAGE (V)
50
25
0
100
0 50 100 150 200
175
CJ, JUNCTION CAPACITANCE (pF)
150
75
125
RHRG1540CC, RHRG1560CC
4
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
Test Circuits and Waveforms
FIGURE 8. trr TEST CIRCUIT FIGURE 9. trr WAVEFORMS AND DEFINITIONS
FIGURE 10. AVALANCHE ENERGY TEST CIRCUIT FIGURE11. AVALANCHE CURRENT ANDVOLTAGE
WAVEFORMS
RG
L
VDD
IGBT
CURRENT
SENSE
DUT
VGE t1
t2
VGE AMPLITUDE AND
t1 AND t2CONTROL IF
RG CONTROL dIF/dt
+
-
dt
dIF
IFtrr
tatb
0
IRM
0.25 IRM
DUT
CURRENT
SENSE +
LR
VDD
R < 0.1Ω
EAVL = 1/2LI2 [VR(AVL)/(VR(AVL) - VDD)]
Q1= IGBT (BVCES > DUT VR(AVL))
-
VDD
Q1
IMAX = 1A
L = 40mH
IV
t0t1t2
IL
VAVL
t
IL
RHRG1540CC, RHRG1560CC
