T-13/4 (5 mm), T-1 (3 mm),
5 Volt, 12 Volt, Integrated
Resistor LED Lamps
Technical Data
Features
• Integral Current Limiting
Resistor
• TTL Compatible
Requires no External Current
Limiter with 5 Volt/12 Volt
Supply
• Cost Effective
Saves Space and Resistor Cost
• Wide Viewing Angle
• Available in All Colors
Red, High Efficiency Red,
Yellow, and High Performance
Green in T-1 and
T-13/4Packages
Description
The 5 volt and 12 volt series
lamps contain an integral current
limiting resistor in series with the
LED. This allows the lamp to be
driven from a 5 volt/12 volt
source without an external
current limiter. The red LEDs are
made from GaAsP on a GaAs
substrate. The High Efficiency
Red and Yellow devices use
GaAsP on a GaP substrate.
The green devices use GaP on a
GaP substrate. The diffused lamps
provide a wide off-axis viewing
angle.
The T-13/4 lamps are provided
with sturdy leads suitable for wire
wrap applications. The T-13/4
lamps may be front panel
mounted by using the HLMP-0103
clip and ring.
Figure A. T-1 Package. Figure B. T-13/4 Package.
Package Dimensions
HLMP-1600, HLMP-1601
HLMP-1620, HLMP-1621
HLMP-1640, HLMP-1641
HLMP-3600, HLMP-3601
HLMP-3650, HLMP-3651
HLMP-3680, HLMP-3681
2
Selection Guide
Luminous Intensity
Part Iv (mcd)
Package Operating Number
Color Package Description Outline 2θ1/2[1] Voltage(V) HLMP- Min. Max.
60 5 1600 2.1 -
T-1 Tinted Diffused A 1600-D00xx 2.1 -
1601 2.1 -
Red 60 12 1601-D00xx 2.1 -
1601-GH0xx 8.6 27.6
60 5 3600 2.1 -
T-1 3/4 Tinted Diffused B 3600-D00xx 2.1 -
60 12 3601 2.1 -
3601-D00xx 2.1 -
1620 2.2 -
60 5 1620-C00xx 2.2 -
T-1 Tinted Diffused A 1620-C0Bxx 2.2 -
1620-EFBxx 3.4 10.8
Yellow 60 12 1621 2.2 -
1621-C00xx 2.2 -
60 5 3650 2.2 -
T-1 3/4 Tinted Diffused B 3650-C00xx 2.2 -
60 12 3651 2.2 -
3651-C00xx 2.2 -
1640 1.6 -
60 5 1640-B00xx 1.6 -
T-1 Tinted Diffused A 1640-B0Dxx 1.6 -
1640-DE0xx 4.2 13.4
Green 60 12 1641 1.6 -
1641-B00xx 1.6
60 5 3680 1.6 -
T-1 3/4 Tinted Diffused B 3680-B00xx 1.6 -
60 12 3681 1.6 -
3681-B00xx 1.6 -
Note:
1. θ1/2 is the off-axis angle at which the luminous intensity is 1/2 the axial luminous intensity.
3
Part Numbering System
HLMX-X 6 X X X X X XX
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1,B1: Right Angle Housing, Uneven Leads
A2,B2: Right Angle Housing, Even Leads
Color Bin Options
0: Full color bin distribution
B: Color bin 2&3 only
D: Color bin 4&5 only
Maximum Iv Bin Options
0: Open (No. max. limit)
Others: Please refer to the Iv bin Table
Minimum Iv Bin Options
Please refer to the Iv bin Table
Operating Voltage
0: 5 V
1: 12 V
Color Options
0: GaP HER
2,5: GaP Yellow
4,8: GaP Green
Package Options
3: T-13/4 (5 mm)
1: T-1 (3 mm)
Absolute Maximum Ratings at TA = 25°C
Red/HER/ Red/HER/
Yellow Yellow Green Green
5 Volt Lamps 12 Volt Lamps 5 Volt Lamps 12 Volt Lamps
DC Forward Voltage (TA = 25°C) 7.5 Volts[2] 15 Volts[3] 7.5 Volts[2] 15 Volts[3]
Reverse Voltage (IR = 100 µA) 5 Volts 5 Volts 5 Volts 5 Volts
Operating Temperature Range -40°C to 85°C -40°C to 85°C -20°C to 85°C -20°C to 85°C
Storage Temperature Range -55°C to 100°C -55°C to 100°C -55°C to 100°C -55°C to 100°C
Lead Soldering Temperature 260°C for 5 seconds
Notes:
2. Derate from TA = 50°C at 0.071 V/°C, see Figure 3.
3. Derate from TA = 50°C at 0.086 V/°C, see Figure 4.
4
Electrical/Optical Characteristics at TA = 25°C
High
Efficiency Red Yellow Green
Symbol Description Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Condition
λPPeak 635 583 565 nm
Wavelength
λdDominant 626 585 569 nm Note 4
Wavelength
∆λ1/2Spectral Line 40 36 28 nm
Halfwidth
RθJ-PIN Thermal 290 290 290 °C/W Junction to
Resistance Cathode Lead
(Note 6)
RθJ-PIN Thermal 210 210 210 °C/W Junction to
Resistance Cathode Lead
(Note 7)
IFForward 13 20 13 20 13 20 mA VF = 12 V
Current
12 V Devices
IFForward 10 15 10 15 10 15 mA VF = 5 V
Current
5 V Devices
ηVLuminous 145 500 595 lumen Note 2
Efficacy /Watt
VRReverse 5.0 5.0 5.0 V IR = 100 µA
Breakdown
Voltage
Test
Notes:
4. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
5. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = lV/ηV, where lV is the luminous intensity in candelas and
ηV is the luminous efficacy in lumens/Watt.
6. For Figure A package type.
7. For Figure B package type.
5
Figure 5. Relative Luminous Intensity vs. Angular
Displacement for T-13/4 Package.
Figure 4. Relative Luminous Intensity vs. Angular
Displacement for T-1 Package.
Figure 1. Forward Current vs. Applied Forward Voltage.
5 Volt Devices. Figure 2. Forward Current vs. Applied Forward Voltage.
12 Volt Devices.
Figure 4. Maximum Allowed Applied Forward Voltage vs.
Ambient Temperature RθJA = 175°C/W. 12 Volt Devices.
Figure 3. Maximum Allowed Applied Forward Voltage vs.
Ambient Temperature RθJA = 175°C/W. 5 Volt Devices.
6
Figure 7. Relative Luminous Intensity vs. Applied Forward
Voltage. 12 Volt Devices.
Figure 6. Relative Luminous Intensity vs. Applied Forward
Voltage. 5 Volt Devices.
7
Intensity Range
(mcd)
Color Bin Min. Max.
D 2.4 3.8
E 3.8 6.1
F 6.1 9.7
G 9.7 15.5
H 15.5 24.8
I 24.8 39.6
J 39.6 63.4
K 63.4 101.5
L 101.5 162.4
M 162.4 234.6
N 234.6 340.0
Red O 340.0 540.0
P 540.0 850.0
Q 850.0 1200.0
R 1200.0 1700.0
S 1700.0 2400.0
T 2400.0 3400.0
U 3400.0 4900.0
V 4900.0 7100.0
W 7100.0 10200.0
X 10200.0 14800.0
Y 14800.0 21400.0
Z 21400.0 30900.0
Intensity Range
(mcd)
Color Bin Min. Max.
C 2.5 4.0
D 4.0 6.5
E 6.5 10.3
F 10.3 16.6
G 16.6 26.5
H 26.5 42.3
I 42.3 67.7
J 67.7 108.2
K 108.2 173.2
Yellow L 173.2 250.0
M 250.0 360.0
N 360.0 510.0
O 510.0 800.0
P 800.0 1250.0
Q 1250.0 1800.0
R 1800.0 2900.0
S 2900.0 4700.0
T 4700.0 7200.0
U 7200.0 11700.0
V 11700.0 18000.0
W 18000.0 27000.0
Intensity Bin Limit (Cont'd)
Intensity Range
(mcd)
Color Bin Min. Max.
B 1.8 2.9
C 2.9 4.7
D 4.7 7.6
E 7.6 12.0
F 12.0 19.1
G 19.1 30.7
H 30.7 49.1
I 49.1 78.5
J 78.5 125.7
K 125.7 201.1
Green L 201.1 289.0
M 289.0 417.0
N 417.0 680.0
O 680.0 1100.0
P 1100.0 1800.0
Q 1800.0 2700.0
R 2700.0 4300.0
S 4300.0 6800.0
T 6800.0 10800.0
U 10800.0 16000.0
V 16000.0 25000.0
W 25000.0 40000.0
(Cont'd)
Maximum tolerance for each bin limit is ±18%.
Color Categories
Lambda (nm)
Color Cat # Min. Max.
6 561.5 564.5
5 564.5 567.5
Green 4 567.5 570.5
3 570.5 573.5
2 573.5 576.5
1 582.0 584.5
3 584.5 587.0
Yellow 2 587.0 589.5
4 589.5 592.0
5 592.0 593.0
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
November 20, 2001
Obsoletes 5988-2148EN
5988-4732EN
Tolerance for each bin limit is ±0.5 nm.
Mechanical Option Matrix
Mechanical Option Code Definition
00 Bulk Packaging, minimum increment 500 pcs/bag
01 Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
02 Tape & Reel, straight leads, minimum increment 1300 pcs/bag
A1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
A2 T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag
B1 T-13/4 Angle Housing, uneven lead, minimum increment 500 pcs/bag
B2 T-13/4 Angle Housing, even leads, minimum increment 500 pcs/bag
Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your
local Agilent representative for further clarification/information.