SHD619112 SHD619112P SENSITRON SEMICONDUCTOR TECHNICAL DATA, PROVISIONAL DATA ONLY DATA SHEET 4208, REV. A HERMETIC SILICON CARBIDE RECTIFIER DESCRIPTION: A 1200-VOLT, 20 AMP POWER SILICON CARBIDE RECTIFIER IN A CERAMIC HERMETIC LCC-3P PACKAGE FEATURES: * NO RECOVERY TIME OR REVERSE RECOVERY LOSSES * NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR * SCREENED VERSIONS ARE AVAILABLE MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 1200 Volts MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC = 65 OC, for Dual Package) IO 20 Amps MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC = 65 OC, for Single Package) IO 10 Amps MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG O (t = 8.3ms, Sine) per leg, TC = 25 C IFRM 50 Amps MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG O (t = 10s, pulse) per leg, TC = 25 C IFSM 250 Amps Pd 40 W RJC 0.9 C/W Top, Tstg -55 to +200 C PEAK INVERSE VOLTAGE MAXIMUM POWER DISSIPATION, TC = 25 OC MAXIMUM THERMAL RESISTANCE, Junction to Case (PER DUAL PACKAGE) MAXIMUM OPERATING and STORAGE TEMPERATURE RANGE* * Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C. ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP (If = 10A PER LEG) Vf MAXIMUM REVERSE CURRENT (1200V PIV PER LEG) Ir TYP MAX. TJ = 25 C 1.6 TJ = 175 C 2.5 3.0 TJ = 25 C 0.01 0.20 TJ=175 C 0.02 1.00 JUNCTION CAPACITANCE (Vr =400V) per leg 70 TOTAL CAPACITIVE CHARGE (VR=1200V IF=10A di/dt=500A/s TJ=25C) QC per leg 60 UNITS 1.8 Volts mA PF N/A * 221 WEST INDUSTRY COURT * DEER PARK, NY 11729-4681 * PHONE (631) 586-7600 * FAX (631) 242-9798 * * World Wide Web - http://www.sensitron.com * E-mail Address - sales@sensitron.com * nC SHD619112 SHD619112P SENSITRON TECHNICAL DATA, PROVISONAL DATA ONLY DATA SHEET 4208, REV. A MECHANICAL DIMENSIONS: In Inches / mM Common Cathode .145 (3.68) 2 .037 (.94) .030 (.76) Min. 1 3 .050 (1.27) Single 2 .375 (9.53) 1 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) 3 1 .415 (10.54) 2 3 .157 (3.99) .625 (15.88) LCC-3P PINOUT TABLE DEVICE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) PIN 1 CATHODE COMMON CATHODE PIN 2 ANODE ANODE 1 Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche capabilities of the device are limited. Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially damaging conditions in their applications. * 221 WEST INDUSTRY COURT * DEER PARK, NY 11729-4681 * PHONE (631) 586-7600 * FAX (631) 242-9798 * * World Wide Web - http://www.sensitron.com * E-mail Address - sales@sensitron.com * PIN 3 ANODE ANODE 2 SHD619112 SHD619112P SENSITRON TECHNICAL DATA, PROVISONAL DATA ONLY DATA SHEET 4208, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 WEST INDUSTRY COURT * DEER PARK, NY 11729-4681 * PHONE (631) 586-7600 * FAX (631) 242-9798 * * World Wide Web - http://www.sensitron.com * E-mail Address - sales@sensitron.com *