MC3403DX - Fairchild Semiconductor

www.fairchildsemi.com

Rev. 1.0.1

Features

• Output voltage can swing to GND or negative supply

• Wide power supply range;

• Single supply of 3.0V to 36V

• Dual sup pl y of ±1.5V to ±18V

• Electrical characteristics similar to the KA741

• Class AB output stage for minimal crossover distortion

• Short circuit protected output.

Description

The MC3303/MC3403 series is a monolithic Quad

operational amplifier consisting of four independent

amplifiers. The device has high gain, internally

frequency, compensated operational amplifiers designed to

operate from a single power supply or dual power supplies

over a wide range of voltages. The common mode input

range includes the negative supply, thereby eliminating the

necessity for extern al biasin g components in many

applications.

14-SOP

14-DIP

Internal Block Diagram

MC3303/MC3403

Quad Opera tional Amplifier

MC3303/MC3403

Schematic Diagram

Absolute Maximum Ratings

Parameter Symbol Value Unit

Supply Voltage VCC ±18 or +36 V

Differential Input Voltage VI(DIFF) 36 V

Input Voltage VI±18 V

Output Short Circuit Duration - Continuous -

Power Dissipation PD670 mW

Operating Temperature

MC3303

MC3403 TOPR -40 ~ + 85

0 ~ + 70 °C

°C

Storage Temperature TSTG -65 ~ + 150 °C

MC3303/MC3403

Electrical Characteristics

(VCC = +15V, VEE = -15V for MC3403, VCC = +14V, VEE = GND for MC3303, TA = 25 °C, unless otherwise

specified)

Parameter Symbol Conditions MC3303 MC3403 Unit

Min. Typ. Max. Min. Typ. Max.

Input Offset Voltage VIO - 1.5 8.0 - 1.5 10 mV

NOTE 1 - - 10 - - 12

Input Offset Current IIO - 5 75 - 5 50 nA

NOTE 1 - - 150 - - 100

Input Bias Current IBIAS - 30 200 - 30 200 nA

NOTE 1 - - 500 - - 400

Large Signal Voltage Gain GVVO(P-P) = ±10V 20 200 - 20 200 - V/mV

RL = 2KΩNOTE 1 15 - - 15 - -

Input Impedance RI- 0.3 1.0 - 0.3 1.0 - MΩ

Output Voltage Swing VO(P-P)

RL = 10KΩ+12 +12.5 - ±12 ±13.5 - VRL = 2KΩ+10 +12 - ±10 ±13 -

RL = 2KΩNOTE 1 +10 - - ±10 - -

Input Common Mode

Voltage Range VI(R) - 12V -

VEE 12.5V-

VEE -13V-

VEE 13.5V

- VEE -V

Common Mode Rejection

Ratio CMRR RS≥10KΩ70 90 - 70 90 - dB

Power Supply Current ICC VO(P) = 0, RL = ∞- 2.8 7.0 - 2.3 7.0 mA

Output Short Circuit

Current ISC Each amplifier ±10 ±30 ±45 ±10 ±20 ±45 mA

Positive Supply

Rejection Ratio PSRR(+) -- 30 150 - 30 150 µV/V

Negative Supply

Rejection Ratio PSRR(-) -- - - - 30 150 µV/V

MC3303/MC3403

Electrical Characteristics (Continued)

(VCC = +15V, VEE = -15V for MC3403, VCC = +14V, VEE = GND for MC3303, TA = 25 °C, unless otherwise

specified)

Note:

1. MC3403: 0 °C ≤ TA ≤ +70 °C , MC3303: -40 °C ≤ TA ≤ +85 °C

2. Guaranteed by design.

Parameter Symbol Conditions MC3303 MC3403 Unit

Min. Typ. Max. Min. Typ. Max.

Average Temperature

Coefficient of Input

Offset Current (Note2) ∆IIO/∆T--50 --

50 -pA/ °C

Input Offset Voltage Drift

(Note2) ∆VIO/∆T--10- -10-µV/ °C

Power Bandwidth (Note2) GBW GV=1,RL=2KΩ,

VO(P.P)=20VP-P,

THD=5% -9.0- -9.0-KHz

Small Signal Bandwidth

(Note2) BW GV=1,RL=10KΩ,

VO(P-P)=50mV -1.0- -1.0-MHz

Slew Rate (Note2) SR GV=1,VI= -10V to

+10V -0.4- -0.4-V/µs

Rise Time (Note2) TRGV=1,RL=10KΩ,

VO(P-P)=50mV -0.35- -0.35- µs

Fall Time (Note2) TFGV=1,RL=10KΩ,

VO(P-P)=50mV -0.35- -0.35- µs

Over Shoot (Note2) OS GV=1,RL=10KΩ,

VO(P-P)=50mV -20- -20-%

Phase Margin (Note2) MPH GV=1,RL=2KΩ,

CL =200pF -60- -60-

De-

gree

Crossover Distortion (Note2) CD VI =30mVP-P,

VO(P-P)=2.0VP-P,

f =10KHz -1.0--1.0-%

MC3303/MC3403

Electrical Characteristics

(VCC = 5.0V, VEE = GND, TA=25 °C unless otherwise specified)

Parameter Symbol Conditions MC3303 MC3403 Unit

Min. Typ. Max. Min. Typ. Max.

Input Offset Voltage VIO ---10-2.010mV

Input Offset Current IIO - - - 75 - 30 50 nA

Input Bias Current IBIAS - - - 500 - 200 500 nA

Large Signal Open

Loop Voltage Gain GVRL = 2.0KΩ10 200 - 10 200 - V/mV

Power Supply

Rejection Ratio PSRR -- - 150 - - 150 µV/V

Output Voltage Range VO(P-P) RL = 10KΩ, VCC = 5.0V 3.3 3.5 - 3.3 3.5 - V

RL =10KΩ, 5.0V ≤ VCC ≤ 30V VCC

-2.0 VCC-

1.7 -VCC

-2.0 VCC

-1.7 -

Supply Current ICC - - 2.5 7.0 - 2.5 7.0 mA

Channel Separation CS f = 1KHz to 20KHz - 120 - - 120 - dB

MC3303/MC3403

Typica l Perfo rma nce Characteristics

Figure 1. Open Loop Frequency Response Figure 2. Wave Response

Figure 3. Output Swing Figure 4. Output Voltage vs Frequency

Figure 5. Input Bias Current vs Temperature Figure 6. Input Bias Current vs Supply Voltage

MC3303/MC3403

Mechanical Dimensions

Package Dimensions in millimeters

6.40

±0.20

7.62

0.300

2.54

0.100

#7 #8

#14

0.252

±0.008

0~15°

0.25 +0.10

–0.05

0.010+0.004

–0.002

3.30

±0.30

0.130

±0.012

3.25

±0.20

0.128

±0.008

19.40

±0.20

0.764

±0.008

19.80

0.780 MAX

5.08

0.200

0.20

0.008

MAX

MIN

2.08

0.082

()

0.46

±0.10

0.018

±0.004

0.059

±0.004

1.50

±0.10

14-DIP

MC3303/MC3403

Mechanical Dimensions (Continued)

Package Dimensions in millimeters

8.56

±0.20

0.337

±0.008

1.27

0.050

5.72

0.225

1.55

±0.10

0.061

±0.004

0.05

0.002

6.00

±0.30

0.236

±0.012

3.95

±0.20

0.156

±0.008

0.60

±0.20

0.024

±0.008

8.70

0.343 MAX

#7 #8

0~8°

#14

0.47

0.019

()

1.80

0.071

MAX0.10

MAX0.004

MAX

MIN

0.10

-0.05

0.20+

0.004

-0.002

0.008

0.10

-0.05

0.406+

0.004

-0.002

0.016

14-SOP

MC3303/MC3403

Ordering Information

Product Number Package Operating Temperat ure

MC3403P 14-DIP 0 ~ + 70°C

MC3403D 14-SOP

MC3303P 14-DIP -40 ~ + 85°C

MC3303D 14-SOP

MC3303/MC3403

6/1/01 0.0m 001

Stock#DSxxxxxxxx

 2001 Fairchild Semicond uctor Corporation

LIFE SU PP ORT POL ICY

FAIRCHILD’S PRODUCTS AR E NOT AUTHORIZED FOR USE AS C RITICAL COMPONENTS I N LIFE S UPPORT DEVICE S

OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR

CORPORA TION. As used he rein :

1. Life support devices or systems are devices or systems

which, (a) are intended for surgical implant into the body,

or (b) support or sustain life, and (c) whose failure to

perform when properly used in accordance with

instructions for use provided in the labeling, can be

reasonably expected to result in a significant injury of the

user.

2. A critical component in any component of a life support

device or syst em who se failure to perform can be

reasonably expected to cause the failure of the life support

device or system, or to affect its safety or effec tiv ene ss.

www.fairchildsemi.com

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY

PRO DUCTS HEREIN TO IMPROVE RELIABILITY, FUN C TION OR DESIGN . FAIRCHILD DO ES NOT ASSUME ANY

LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER

DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIG HTS, NOR THE RIGHTS OF OTHERS.