CD VH VH Series 2000 - 3 000h at 105C 105C * Standard 105C CD VS BS CD VH VH lower ESR CD VZ VZ Characteristics Operating Temperature Range (C) -40 ~ +105 SMD Item Voltage Range (V) 4 ~ 100 Capacitance Range (F) 0,1 ~ 2200 Capacitance Tolerance (20C, 120Hz) 20% Leakage Current (A) After 2 minutes at 20C application of rated voltage, leakage current is not more than 0,01CV or 3, wichever is greater. C: Nominal Capacitance (F) V: Rated Voltage (V) Rated Voltage (V) 4 6,3 10 16 25 35 0,38 0,30 0,24 0,19 0,16 0,14 Rated Voltage (V) 4 6,3 10 16 25 35 Z -25C / Z +20C 7 4 3 Z -40C / Z +20C 15 8 6 Dissipation Factor (20C, 120Hz) Tan(max) Stability at Low Temperature (Impedance Ratio at 120Hz) Resistance to Soldering Heat After reflow soldering according to Reflow Soldering Condition and restored at room temperature, they meet the requirements listed at right. Useful Life O 6 : 2 000h O 8 : 3 000h Lifetime Leakage Current Capacity Change Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level 50 63 100 0,12 50 63 100 2 3 4 4 3 Capacitance Change Within 10% of initial value Tan Initial specified value or less Leakage Current Initial specified value or less Load Life O 6 : 1 000h O 8 : 2 000h Endurance Test Shelf Life O 6 : 1 000h O 8 : 2 000h 500h Not more than specified value Not more than specified value Not more than specified value Not more than specified value Within 50% of initial value Within 16V : 30% 25V : 20% of initial value Within 16V : 30% 25V : 20% of initial value Within 16V : 30% 25V : 20% of initial value Not more than 300% of specified value Not more than 200% of specified value Not more than 200% of specified value Not more than 200% of specified value UR IR 105C 1% Failure Rate UR IR 105C guaranteed UR IR = 0 105C UR = 0 IR = 0 105C After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Frequency Coefficient 14 Temperature Coefficient Frequency 50/60Hz 120Hz 400Hz 1kHz 10kHz Temperature +70C +85C +105C Coefficient 0,80 1,00 1,32 1,46 1,61 Coefficient 2,0 1,7 1,0 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 CD VH VH Series Ratings for CD VH VH Series (V) Rated Capacitance (F) 33 47 100 4 0G 150 220 330 470 680 1000 1500 2200 22 33 47 100 6,3 0J 150 220 330 470 680 1000 1500 22 33 47 10 1A 100 150 220 330 470 680 1000 10 22 33 47 16 1C 100 150 220 330 470 680 1000 4,7 10 22 33 25 1E 47 100 150 220 330 470 Max ESR 20C, 120Hz () 15,3 15,3 10,8 10,8 5,1 5,1 3,4 2,3 1,6 1,1 0,74 0,50 0,34 0,23 18,1 12,1 12,1 8,5 8,5 4,0 4,0 2,7 1,9 1,9 1,3 0,85 0,59 0,40 0,40 0,27 14,5 14,5 9,7 9,7 6,8 6,8 3,2 2,2 1,5 0,97 0,68 0,47 0,32 25,2 11,5 11,5 7,7 7,7 5,4 5,4 2,6 1,7 1,2 1,2 0,76 0,54 0,54 0,37 0,25 45,2 21,3 21,3 9,7 9,7 6,5 6,5 4,6 2,2 1,5 1,5 0,97 0,64 0,64 0,45 Max Ripple Current 105C, 120Hz (mArms) 18 30 24 36 43 60 52 57 100 105 210 230 315 340 22 22 27 25 33 39 50 55 67 105 105 210 210 230 300 315 20 25 22 30 30 41 53 62 105 196 210 270 315 18 20 27 28 40 31 48 60 95 105 150 195 230 295 315 340 13 14 20 25 36 29 44 48 91 100 140 175 220 240 280 Size ODxL VDC Code (mm) (V) 4 x 5,4 5 x 5,4 4 x 5,4 5 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 7,7 6,3 x 7,7 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 4 x 5,4 4 x 5,4 5 x 5,4 4 x 5,4 5 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 7,7 6,3 x 7,7 8 x 10,5 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 4 x 5,4 5 x 5,4 4 x 5,4 5 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 7,7 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 4 x 5,4 4 x 5,4 5 x 5,4 5 x 5,4 6,3 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 7,7 6,3 x 7,7 8 x 10,5 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 10 x 10,5 4 x 5,4 4 x 5,4 5 x 5,4 5 x 5,4 6,3 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 7,7 6,3 x 7,7 8 x 10,5 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 Rated Capacitance (F) 3,3 4,7 10 22 33 35 1V 47 100 150 220 330 470 0,1 0,22 0,33 0,47 1 2,2 3,3 4,7 50 1H 10 22 33 47 100 63 1J 150 220 0,1 0,22 0,33 0,47 1 2,2 3,3 4,7 10 22 33 47 100 1 2,2 3,3 100 2A 4,7 10 22 33 47 Max ESR 20C, 120Hz Max Ripple Current 105C, 120Hz () 56,3 39,6 18,6 18,6 8,5 5,7 4,0 4,0 1,9 1,9 1,3 0,84 0,84 0,56 0,40 1540 700 467 328 154 70,0 46,7 32,8 32,8 15,4 7,0 7,0 4,7 3,3 3,3 1,6 1,6 1,1 1,0 1460 664 443 311 146 66,4 44,3 31,1 14,6 14,6 6,7 6,7 4,5 3,2 3,2 1,5 140 63,4 42,3 42,3 29,7 29,7 14,0 14,0 6,4 6,4 4,3 3,0 (mArms) 13 14 14 21 38 42 50 70 84 120 155 190 220 245 280 0,7 1,6 2,5 3,5 7 11 13 13 16 24 42 51 60 63 120 140 170 170 220 0,7 1,6 2,5 3,5 7 11 13 16 24 39 49 98 112 119 160 196 7 14 20 32 21 35 35 77 84 126 133 140 Size ODxL (mm) 4 x 5,4 4 x 5,4 4 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 7,7 6,3 x 7,7 8 x 10,5 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 10 x 10,5 4 x 5,4 4 x 5,4 4 x 5,4 4 x 5,4 4 x 5,4 4 x 5,4 4 x 5,4 4 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 7,7 6,3 x 7,7 6,3 x 7,7 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 10 x 10,5 4 x 5,4 4 x 5,4 4 x 5,4 4 x 5,4 4 x 5,4 4 x 5,4 5 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 7,7 6,3 x 7,7 8 x 10,5 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 4 x 5,4 6,3 x 5,4 6,3 x 5,4 6,3 x 7,7 6,3 x 5,4 6,3 x 7,7 6,3 x 7,7 8 x 10,5 8 x 10,5 10 x 10,5 10 x 10,5 10 x 10,5 Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 15 SMD VDC Code Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytic Capacitor PC = Polymer Capacitor SMD =V Radial = R Snap-In = S For coding please refer to the pages of ratings PT 101 M Series Code Capacitance Code (in F) Capacitance Tolerance 0,47 = R47 20% FF 25 Lead Form Terminal/ Pitch Size = M SMD: 0611 JE xxxxx Dimension for Specials only 4x7 = 0407 CD VS = BS CD VH = VH 1,0 = 010 CD VZ = VZ 2,2 = 2R2 +30 / -10% = Q Radial: CD 261 = LK 100 = 101 Long Lead = LL 2,0mm = 20 35x80 CD 261X = QX 1000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 10% =K +50 / -10% = T Taped = FF Terminal = T2 5x11,5 = 0511 6,3x11,5= 0611 CD 262 = QM 10000 = 103 Cut4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4 2 Pin CD 294 = BW 6,3mm Pin Length = T6 3 Pin = P3 CD 295 = BC Soldering Pin 4 Pin = P4 CD 296 = KC 5 Pin = P5 CD 297 = BB CD 299 = PG on request: alternative lead forms (axial, 90 - angle, others) = 3580 12,5mm = 12 = S4 = P2 preferred CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Technical Specification SMD Type Dimensions O DxL 4 x 5,4 5 x 5,4 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 6,3 x5,4 6,3x 7,7 8 x 10,5 8 x 11,8 10x10,5 10x12,7 0,5 - 0,8 0,7 - 1,1 in mm Taping Dimensions Size (DxL) w 0,3 A 0,2 B 0,2 P 0,1 t2 0,2 F 0,1 t1 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 14 1 50 1 6,3 18 1 50 1 8; 10 25 1 50 1 Polymer 25 1 80 1 in mm Allowable Range of Peak Temperature Size T (C) t (second) t 1 (second) O 4 ~ 6,3 O 8 x 10,5 O 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2