500W Single Output with PFC Function RSP-500 series Dimension L * W * H 230 * 127 * 40.5 (1U) 9.06 * * 1.59 (1U) 5 R33100 RoHS CNS14336-1 mm inch Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 UL62368-1 EN62368-1 GB4943.1 TPTC004 IEC62368-1 Features Universal AC input / Full range Built-in active PFC function High efficiency up to 90.5% Forced air cooling by built-in DC fan (Note.5) Built-in remote ON-OFF control / remote sense / DC OK signal Protections: Short circuit / Overload / Over voltage Applications Factory control or automation apparatus Test and measurement instrument Laser related machine Burn-in facility RF application / Over temperature 3 years warranty Description RSP-500 is a 500W single output enclosed type AC/DC power supply. This series operates for 85~264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by the built-in fan with fan speed control, working for the temperature up to 70. Moreover, RSP-500 provides vast design flexibility by equipping various built-in functions such as remote ON-OFF control, remote sense,DC OK signal, etc. Model Encoding / Order Information RSP - 500 - 24 Output voltage (3.3V/4V/5V/12V/15V/24V/27V/48V) Output wattage Series name File Name:RSP-500-SPEC 2020-04-13 RSP-500 500W Single Output with PFC Function series SPECIFICATION MODEL OUTPUT RSP-500-3.3 RSP-500-4 RSP-500-5 RSP-500-12 RSP-500-15 RSP-500-24 RSP-500-27 RSP-500-48 DC VOLTAGE 3.3V 4V 5V 12V 15V 24V 27V 48V RATED CURRENT 90A 90A 90A 41.7A 33.4A 21A 18.6A 10.5A CURRENT RANGE 0 ~ 90A 0 ~ 90A 0 ~ 90A 0 ~ 41.7A 0 ~ 33.4A 0 ~ 21A 0 ~ 18.6A 0 ~ 10.5A RATED POWER 297W 360W 450W 500.4W 501W 504W 502.2W 504W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 3.6 ~ 4.3V 4.5 ~ 5.5V 10 ~ 13.2V 13.5 ~ 18V 20 ~ 26.4V 26 ~ 30V 41 ~ 56V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1500ms, 80ms/230VAC HOLD UP TIME (Typ.) 18ms/230VAC 89% 89.5% 90.5% 2.8 ~ 3.6V 14ms/115VAC at full load VOLTAGE RANGE Note.4 85 ~ 264VAC 47 ~ 63Hz FREQUENCY RANGE INPUT PROTECTION 120 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 81% 4.2A/115VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 20A/115VAC 3000ms, 80ms/115VAC at full load PF>0.98/115VAC at full load 84% 83% 88% 88% 2.1 A/230VAC 5.3A/115VAC 2.65 A/230VAC 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVERLOAD 105 ~ 130% rated output power Protection type : Constant current limiting , recovers automatically after fault condition is removed 3.8 ~ 4.5V 4.5 ~ 5.3V 5.75 ~ 6.75V 13.8 ~ 16.2V 18.8 ~ 21.8V 27.6 ~ 32.4V 32.9 ~ 38.3V OVER VOLTAGE OVER TEMPERATURE REMOTE CONTROL FUNCTION REMOTE SENSE 58.4 ~ 68V Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down POWER ON:open or 0~0.8VDC between RC+(Pin 4)&RC-(Pin3) on CN100 POWER OFF: 4~10VDC between RC+(Pin 4)&RC-(Pin3) on CN100 Compensate voltage drop on the load wiring up to 0.3V FAN CONTROL (Typ.) RTH2 50 10 Fan on ; RTH2 40 10 Fan off (Fan always on for 3.3~5V,Fan ON/OFF control for 12~48V) WORKING TEMP. -30 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note.4) EMC EMISSION OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020,GB/T 9254, CNS13438 Class B EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3 heavy industry level, criteria A, EAC TP TC 020 MTBF 187.7K hrs min. DIMENSION 230*127*40.5mm (L*W*H) 1.3Kg; 9pcs/12.7Kg/0.7CUFT PACKING NOTE UL62368-1, TUV EN62368-1 , EAC TP TC 004 , CCC GB4943.1 , BSMI CNS14336-1approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. Fan always on for 3.3~5V,Fan ON/OFF control for 12~48V. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 7. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:RSP-500-SPEC 2020-04-13 RUSSPP--5320205 500W Single Output with PFC Function Mechanical Specification Case No.226A ssee rr iieess Unit:mm 230 88 39.3 159.7 9.2 6 5 4 TB2 11 3 9.5 8.2 13 24 5-M4 L=4mm Pin No. 1 2 3 127 89 1 LED CN100 69 147 SVR1 +V ADJ. AC Input Terminal Pin No. Assignment (TB1) Air flow direction 2 DC Output Terminal Pin No. Assignment (TB2) 19 3 2 TB1 1 Assignment AC/L AC/N FG 16 Pin No. 1~3 4~6 Assignment DC OUTPUT -V DC OUTPUT +V 15 Connector Pin No. Assignment (CN100) : HRS DF11-04DP-2DS or equivalent 170 40.5 18 Pin No. Assignment 1 -S 2 +S 3 RCRC+ 4 12.5 13.3 2.5 6.9 40 Mating Housing Terminal HRS DF11-4DS or equivalent HRS DF11-**SC or equivalent 4-M4(Both Sides) L=5mm 6.5 6.5 Block Diagram FAN ON/OFF CONTROL fosc : 70KHz FAN +S ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS & PFC RECTIFIERS & FILTER POWER SWITCHING +V -V -S DETECTION CIRCUIT O.L.P. FG O.T.P. Derating Curve O.T.P. PWM & PFC CONTROL O.V.P. RC+ RC- Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -30 60 50 40 0 10 20 30 40 50 AMBIENT TEMPERATURE () 60 70 (HORIZONTAL) 85 90 95 100 115 135 155 175 195 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:RSP-500-SPEC 2020-04-13 RUSSPP--5320205 500W Single Output with PFC Function ssee rr iieess Function Description of CN100 Pin No. Function Description Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to -S 1 minimize noise pick-up effect. The maximum line drop compensation is 0.3V. 2 +S 3 4 RCRC+ Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.3V. Return for RC+ signal input. Turns the output on and off by electrical or dry contact between pin 4 ( RC+) and pin 3 (RC-). 0~0.8VDC or open: Power ON, 4~10VDC: Power OFF. Function Manual CN100 1.Remote Control The PSU can be turned ON/OFF by using the "Remote Control" function. SVR1 +V ADJ. TB1 4 RC-S RC+ +S 1 2 3 2 1 2 -V SW 13 24 TB2 +V 1 LED OFF 4 SW ON (4 ~ 10V) 3 ON 6 SW OFF (0 ~ 0.8VDC) or open CN100 PSU Status 5 Between RC-(pin3) and RC+(pin4) on CN100 3 External Power Source I=6~20mA - + LOAD 2.Remote Sense The remote sensing compensates voltage drop on the load wiring up to 0.3V SVR1 +V ADJ. +S (pin2) + - RC-S RC+ +S 1 2 TB1 3 2 1 2 1 LED 4 3 6 5 -V 4 13 24 TB2 +V CN100 CN100 3 -S (pin1) LOAD Sense lines should be twisted in pairs File Name:RSP-500-SPEC 2020-04-13