SOGC 01, 03, 05 Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface Mount FEATURES * Isolated, bussed and dual terminator schematics available * 0.110" (2.79 mm) maximum seated height * Rugged, molded case construction * 0.050" (1.27 mm) lead spacing * Reduces total assembly costs * Compatible with automatic surface mounting equipment * Uniform performance characteristics * Meets EIA PDP 100, SOGN-0003 outline dimensions * Available in tube pack or tape and reel pack * Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL SCHEMATIC 01 03 05 01 03 05 SOGC16 SOGC20 POWER RATING ELEMENT PACKAGE P70 C P70 C W W 0.1 1.6 0.19 1.6 0.1 1.6 0.1 2.0 0.19 2.0 0.1 2.0 TOLERANCE (1) % RESISTANCE RANGE 1, 2, 5 1, 2, 5 2, 5 1, 2, 5 1, 2, 5 2, 5 10 to 1M 10 to 1M 10 to 1M 10 to 1M 10 to 1M 10 to 1M MAXIMUM WORKING VOLTAGE (2) VDC 50 50 50 50 50 50 TEMPERATURE COEFFICIENT ppm/C 100 100 100 100 100 100 Notes * 100 m maximum on 0 -jumper. (1) 2 % standard, 1 % and 5 % available. (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: SOGC200310K0GDC (preferred part number format) S O GLOBAL MODEL SOGC G C 2 0 PIN COUNT SCHEMATIC 16 20 01 = Bussed 03 = Isolated 00 = Special 0 3 1 0 RESISTANCE VALUE R= K = k M = M 10R0 = 10 680K = 680 k 1M00 = 1.0 M K 0 TOLERANCE CODE F=1% G=2% S = Special Z = 0 Jumper G D PACKAGING SPECIAL EJ = Lead (Pb)-free, tube EA = Lead (Pb)-free, tape and reel DC = Tin/lead, tube RZ = Tin/lead, tape and reel Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable Historical Part Number Example: SOGC2003103G (will continue to be accepted) SOGC 20 03 103 HISTORICAL MODEL PIN COUNT RESISTANCE VALUE SCHEMATIC C G D02 TOLERANCE CODE PACKAGING New Global Part Numbering: SOGC1605131AGRZ (preferred part number format) S O GLOBAL MODEL SOGC G C 1 6 PIN COUNT SCHEMATIC 16 20 05 = Dual terminator 0 5 1 RESISTANCE VALUE 3 digit impedance code, followed by alpha modifier (see Impedance Codes table) 3 1 A G TOLERANCE CODE F=1% G=2% J=5% PIN COUNT SCHEMATIC RESISTANCE VALUE 1 Z PACKAGING SPECIAL EJ = Lead (Pb)-free, tube EA = Lead (Pb)-free, tape and reel Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable DC = Tin/lead, tube RZ = Tin/lead, tape and reel Historical Part Number Example: SOGC1605221331G (will continue to be accepted) SOGC 16 05 221 331 HISTORICAL MODEL R RESISTANCE VALUE 2 G R61 TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHS compliant, excemptions may apply www.vishay.com 406 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31506 Revision: 27-Apr-10 SOGC 01, 03, 05 Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface Mount Vishay Dale DIMENSIONS in inches (millimeters) B 0.105 (2.67) 0.050 (1.27) Non-Accum. Typ. 0.018 (0.457) Typ. 0.010 0.005 (0.254 0.127) 0.100 (2.54) 0.006 (0.152) Max. Typ. SOGC 0.406 0.012 (10.31 0.305) 0.295 (7.49) Pin 1 0.045 (1.14) A 0.045 (1.14) Ref. 0.028 0.010 (0.711 0.254) Typ. 0.008 (0.203) GLOBAL MODEL A B SOGC16 0.440 (11.18) 0.350 (8.89) SOGC20 0.540 (13.72) 0.450 (11.43) TECHNICAL SPECIFICATIONS PARAMETER Package power rating (max. at + 70 C) UNIT SOGC16 W 1.6 SOGC20 2.0 TCR tracking (- 55 C to + 125 C) ppm/C 50 Voltage coefficient of resistance ppm/V < 50 typical Maximum operating voltage VDC 50 Operating temperature range C - 55 to + 125 Storage temperature range C - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Marking resistance to solvents Maximum solder reflow temperature Solderability Terminals Body Document Number: 31506 Revision: 27-Apr-10 Model number, schematic number, value tolerance, pin 1 indicator, date code Permanency testing per MIL-STD-202, method 215 + 255 C Per MIL-STD-202, method 208E Copper alloy. Solder dipped terminal Molded epoxy For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 407 SOGC 01, 03, 05 Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface Mount Vishay Dale IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K CIRCUIT APPLICATIONS 01 Schematic 15 or 19 resistors with one pin common The SOGCxx01 circuit provides a choice of 15 or 19 nominally equal resistors, each connected between a common lead (16 or 20) and a discrete PC board pin. Commonly used in the following applications: * MOS/ROM pull-up/pull-down * TTL input pull-down * Open collector pull-up * Digital pulse squaring * "Wired OR" pull-up * TTL unused gate pull-up * Power driven pull-up * High speed parallels pull-up SOGC16 Pin 1 SOGC20 03 Schematic 8 or 10 isolated resistors The SOGCxx03 circuit provides a choice of 8 or 10 nominally equal resistors with each resistor isolated from all others and wired directly across. Commonly used in the following applications: * "Wired OR" pull-up * Long-line Impedance balancing * Power driven pull-up * LED current limiting * Powergate pull-up * ECL output pull-down * Line termination * TTL input pull-down SOGC16 Pin 1 SOGC20 05 Schematic R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R1 R2 R1 R1 R2 R1 R2 R2 R1 R2 R1 R2 R1 R2 SOGC16, SOGC20 R2 R1 R2 R2 TTL dual-line terminator; pulse squaring, 14 or 18 pairs of resistors (R1 resistors are common to leads 16 or 20) (R2 resistors are common to leads 8 or 10) The SOGCxx05 circuit contains 14 or 18 pairs of resistors. Each pair is connected between ground and a common line. The junctions of these resistor pairs are connected to the input leads. The 05 circuits are designed for TTL dual-line termination and pulse squaring. Pin 1 www.vishay.com 408 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31506 Revision: 27-Apr-10 SOGC 01, 03, 05 Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface Mount Vishay Dale Power Rating (W) SOGC2001, 03, 05 Pkg. 2.0 SOGC1601, 03, 05 Pkg. 1.6 1.0 Single Resistor 0.19 0.10 - 50 Derating SOGCxx03 SOGCxx01 & 05 0 + 25 + 70 + 125 + 150 Ambient Temperature C PERFORMANCE TEST MAX. R (TYPICAL TEST LOTS) Power conditioning 0.50 % R Thermal shock 0.50 % R Short time overload 0.25 % R Low temperature operation 0.25 % R Moisture resistance 0.50 % R Resistance to soldering heat 0.25 % R Shock 0.25 % R Vibration 0.25 % R Load life 0.50 % R Terminal strength 0.25 % R Insulation resistance Dielectric withstanding voltage Document Number: 31506 Revision: 27-Apr-10 10 000 M (minimum) No evidence of arcing or damage (200 VRMS for 1 min) For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 409 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000