GBPC.. Series
2
Bulletin I27505 rev. F 03/03
www.irf.com
IOMaximum DC output current 25 35 A Resistive or inductive load
20 28 A Capacitive load
@ Case temperature 60 55 °C
IFSM Maximum peak, one-cycle 400 475 A t = 10ms No voltage Initial TJ =TJmax.
non-repetitive forward current 420 500 t = 8.3ms reapplied
335 400 t = 10ms 100% VRRM
350 420 t = 8.3ms reapplied
I2t Maximum I2t for fusing 790 1130 A2s t = 10ms No voltage
725 1030 t = 8.3ms reapplied
560 800 t = 10ms 100% VRRM
512 730 t = 8.3ms reapplied
I2√t Maximum I2√t for fusing 7.9 11.3 KA2√sI
2t for time tx = I2√t x √tx ;
0.1 ≤ tx ≤ 10ms, VRRM = 0V
VF(TO)1 Low-level of threshold voltage 0.76 0.77 V (16.7% x π x IF(AV) < I < π x IF(AV)), @ TJ max.
VF(TO)2 High-level of threshold voltage 0.89 0.92 (I > π x IF(AV)), @ TJ max.
rt1 Low-level forward slope resistance 8.2 4.852 mΩ(16.7% x π x IF(AV) < I < π x IF(AV)), @ TJ max.
rt2 High-level forward slope resistance 6.8 3.867 (I > π x IF(AV)), @ TJ max.
VFM Maximum forward voltage drop 1.1 1.1 V TJ = 25 oC, IFM = IFavg (arm)
IRRM Max. DC reverse current 5.0 5.0 µAT
J = 25 oC, per diode at VRRM
VINS RMS isolation voltage base plate 2700 2700 V f = 50 Hz, t = 1s
Forward Conduction
Voltage VRRM , max repetitive VRSM , max non-repetitive IRRM max. IRRM max.
Type number Code peak AC rev. voltage peak AC rev. voltage @ rated VRRM D.C. rev. curr.
TJ = TJ max. TJ = TJ max. TJ = TJ max. @ T= 125°C
V V mA (µA)
02 200 275 2 500
GBPC25/35..A 04 400 500 2 500
GBPC25/35..W 06 600 725 2 500
(*) 08 800 900 2 500
10 1000 1100 2 500
12 1200 1300 2 500
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Parameters GBPC25 GBPC35 Units Conditions
(*) please see Ordering Information Table - page 3