PRODUCT SPECIFICATION
REVISION
1. SCOPE
This specification describes the electrical, m echanical and environmental param eters for
this battery pack consisting of a Lead Acid cell 2.0V/ 5000 mAh.
2. Cell specification: Cyclon Lead Acid Battery
2.1 Nominal voltage: 2.0V
2.2 Capacity: Nominal 5000mAh at 25ºC using:
Charge profile of 2.4V
Recommended charge current of 2.5A (C/2) for 6 hrs
Discharge profile with a maximum current of 1000mA (C/5) to 1.75V
2.3 Charge condition:
Cyclic: CV of 2.45V – 2.50V, 12.5A max
Float: CV of 2.25V – 2.30V
2.4 Discharge condition:
Maximum discharge current of 65A.
End of discharge voltage of 1.65V.
2.5 Cycle life: 100% of initial minimum capacity after 300 cycles at 0.2C, 25°C
2.6 Temperature:
Charge -40~80°C
Discharge -40~80°C
Storage -65~80°C
2.7 Dimensions:
Length = 81.5 mm
Diameter =44.3
2.8 Weight: 0.810 lb
3. Additional component
3.1 Polyester Label
3.2 Kapton Tape, PVC Heat Shrink, or similar insulators
4. Storage cautions
4.1 Do not store packs in places of high temperature or
under direct sunlight
4.2 Do not store packs in place which may expose them to rain, water or high humidity.
00 ECR/ECN INFORMATION
EC No:
DATE:
TITLE: 2.0V 5000mAh Li-Ion battery
SHEET No.
1 of 1
DOCUMENT NUMBER:
990013D CREATED/REVISED BY:
AIE CHECKED BY
MJS APPROVED BY
MJS
