FCA1206C224M-H1 - Cornell Dubilier Electronics, Inc.

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type FCA Acrylic Surface Mount Film Capacitors

Specications

Type FCA acrylic lm chips are non-inductive

stacked metallized film capacitors which

feature large capacitance values in standard

surface mount case sizes.

Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation

Highlights

• Smallest lm chips

• No piezoelectric eect

• Non-polarized, non-magnetic

• Low ESR

• 1.0 µF/10V in 1206 case

Capacitance Range:

Capacitance Tolerance:

Rated Voltage:

AC Voltage Rating:

Operating Temperature Range:

Dissipation Factor:

Dielectric Strength:

Insulation Resistance (IR):

Resistance to Soldering:

0.10 µF to 1.0 µF

±20% @ 1 kHz and +20 ºC

16 Vdc [1.0 µF in 1206 case, 10 Vdc]

12 Vrms

–40 ºC to +85 ºC

0.015 @ 1 kHz and +20 ºC

175% of rated voltage for 5 seconds

After 1 minute @10 Vdc; +20 ºC

IR >1000 MΩ (C ≤0.33 µF)

IR > 300 MΩ•µF (C >0.33 µF)

The capacitor can withstand being heated in

an oven at 235 ºC for 200 seconds

Filtering • Decoupling • Noise Attenuation • Distortion Free Audio

Type FCA acrylic film capacitors offer high

capacitance values in standard surface mount

case sizes. They excel in attenuating DC power

bus noise, and as ripple lters in dc to dc power

conversion circuits. As coupling capacitors in

audio circuits, they yield distortion free sound

and better high frequency ltering. The 1.0

µF 10 Vdc rating oers a lm capacitor that

is a direct replacement for tantalum “A” case

capacitors. The nonpolar FCA capacitor has

lower ESR and lower DCL than an equivalent

tantalum capacitor, and in high frequency

applications it takes a tantalum capacitor with

ten times the capacitance to perform as well

as the FCA capacitor.

The capacitor is constructed of noninductive

stacked layers of metallized acrylic resin lm

with lead free solder (Sn/Ag/Cu) plated copper

alloy terminals.

Complies with the EU Directive

2002/95/EC requirement

restricting the use of Lead (Pb),

Mercury (Hg), Cadmium (Cd),

Hexavalent chromium (Cr(VI)),

PolyBrominated Biphenyls (PBB)

and PolyBrominated Diphenyl

Ethers (PBDE).

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type FCA Acrylic Surface Mount Film Capacitors

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Ratings

Specications

Moisture Resistance:

After 500 hours with rated voltage applied at +40 ºC and

90 to 95% RH, the capacitor will meet the following limits:

∆C = +20/–3% of the initial measured value

DF ≤2.25% (at 1 kHz)

IR > 100MΩ (C ≤0.33 µF)

IR > 30MΩ•µF(C > 0.33 µF)

Dielectric Strength: Capacitor will withstand 130%

of the rated voltage for 1 minute.

Life Test:

Apply 125% of the rated DC working voltage at 85 ºC

for 1000 hours, and then stabilize them to +20 ºC.

Capacitors will meet the following limits:

C = +7%/–20% of the initial measured value

DF ≤1.65% (at 1 kHz)

IR > 300MΩ (C ≤0.33 µF)

IR > 100MΩ•µF(C > 0.33 µF)

Outline Drawing

Outline Dimen-

Part Number Case Inches Millmeters

Sufx Code L W H S L W H S

(±.008in.) (±.008in.) (±.008in.) (±.012in.) (±0.2mm) (±0.2mm) (±0.2mm) (±0.3mm)

J2 0805 0.079 0.049 0.039 0.018 2.0 1.25 1.0 0.45

H1 1206 0.126 0.063 0.032 0.026 3.2 1.60 0.8 0.65

H2 1206 0.126 0.063 0.039 0.026 3.2 1.60 1.0 0.65

H3 1206 0.126 0.063 0.055 0.026 3.2 1.60 1.4 0.65

G2 1210 0.126 0.098 0.055 0.026 3.2 2.50 1.4 0.65

Catalog Part Maximum Current

Capacitance Number dv/dt 10kHz 20kHz 50kHz 100kHz 200kHz 500kHz 1MHz

(µF) (V/µs) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms)

10 Vdc

1.00 FCA1206A105M-H3 3 0.60 0.76 1.05 1.220 1.35 1.43 1.43

16 Vdc

.10 FCA0805C104M-J2 19 0.15 0.21 0.3 0.375 0.46 0.58 0.65

.15 FCA1206C154M-H1 15 0.21 0.28 0.37 0.450 0.54 0.62 0.68

.22 FCA1206C224M-H1 13 0.25 0.33 0.45 0.550 0.66 0.76 0.84

.33 FCA1206C334M-H2 10 0.35 0.45 0.61 0.740 0.84 0.94 1.00

.47 FCA1206C474M-H3 7 0.39 0.52 0.71 0.860 1.00 1.10 1.17

.68 FCA1206C684M-H3 5 0.48 0.625 0.85 1.040 1.19 1.31 1.34

1.00 FCA1210C105M-G2 3 0.60 0.78 1.05 1.250 1.38 1.46 1.46

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type FCA Acrylic Surface Mount Film Capacitors

Temperature Characteristics Frequency Characteristics

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type FCA Acrylic Surface Mount Film Capacitors

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Typical Applications

Coupling Capacitor for Audio:

Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type FCA Acrylic Surface Mount Film Capacitors

Typical Applications

Filtering Performance:

Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and data (collectively, the

“Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, conrming

and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at

the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without

any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain

applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of

operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute

any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specically and expressly disclaims any

guarantee, warranty or representation concerning the suitability for a specic customer application, use, storage, transportation,

or operating environment. The Information is intended for use only by customers who have the requisite experience and capability

to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided

by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell

Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier

strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light

of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high

degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or

redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not

result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed,

the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety

measures may not be required.