SMBJ5.0 thru 440CA Surface Mount Transient Voltage Suppressors Peak Pulse Power 600W Stand-off Voltage 5.0 to 440V Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Low profile package with built-in strain relief for surface mounted applications Glass passivated junction Low incremental surge resistance, excellent clamping capability 600W peak pulse power capability with a 10/1000us waveform, repetition rate (duty cycle): 0.01% Very fast response time High temperature soldering guaranteed: 250oC/10 seconds at terminals Mechanical Data Case: JEDEC DO-214AA(SMB J-Bend) molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: For unidirectional types the band denotes the cathode, which is positive with respect to the anode under normal TVS operation Weight: 0.003oz., 0.093g Devices for Bidirectional Applications For bi-directional devices, use suffix CA (e.g. SMBJ10CA). Electrical characteristics apply in both directions. Maximum Ratings and Thermal Characteristics (Ratings at 25oC ambient temperature unless otherwise specified.) Parameter Peak pulse power dissipation with a 10/1000us waveform (1,2) (see Fig. 1) Peak pulse current with a 10/1000us waveform (1) Symbol Value Unit P PPM Minimum 600 W A IPPM See Next Table Peak forward surge current 8.3ms single half sine-wave uni-directional only (2) IFSM 100 Typical thermal resistance, junction to ambient (4) RJA 100 o C/W Typical thermal resistance, junction to lead RJL 20 o C/W TJ, TSTG -55 to +150 Operating junction and storage temperature range Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig. 2 2. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal 3. Mounted on minimum recommended pad layout 589 A o C Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. VF=3.5V at IF=50A (uni-directional only) Device marking co d e Breakdow n voltage V(BR) (Volts) (1) Stand-off voltage VWM (Volts) Maximum reverse leakage at VWM ID(3) (uA) Maximum peak pulse surge current IPPM(2) (A) Maximum clamping voltage at IPPM VC (Volts) 9.6 Device Type UNI BI Min. Max. Test current at IT (mA) SMBJ5.0 KD AD 6.40 7.82 10 5.0 800 62.5 KE AE 6.40 7.07 10 5.0 800 65.2 9.2 SMBJ6.0 KF AF 6.67 8.15 10 6.0 800 52.6 11.4 SMBJ5.0A (5) SMBJ6.0A KG AG 6.67 7.37 10 6.0 800 58.3 10.3 SMBJ6.5 KH AH 7.22 8.82 10 6.5 500 48.8 12.3 SMBJ6.5A KK AK 7.22 7.98 10 6.5 500 53.6 11.2 SMBJ7.0 KL AL 7.78 9.51 10 7.0 200 45.1 13.3 12.0 SMBJ7.0A KM AM 7.78 8.60 10 7.0 200 50.0 SMBJ7.5 KN AN 8.33 10.2 1.0 7.5 100 42.0 14.3 SMBJ7.5A KP AP 8.33 9.21 1.0 7.5 100 46.5 12.9 SMBJ8.0 KQ AQ 8.89 10.9 1.0 8.0 50 40.0 15.0 SMBJ8.0A KR AR 8.89 9.83 1.0 8.0 50 44.1 13.6 SMBJ8.5 KS AS 9.44 11.5 1.0 8.5 20 37.7 15.9 SMBJ8.5A KT AT 9.44 10.4 1.0 8.5 20 41.7 14.4 SMBJ9.0 KU AU 10.0 12.2 1.0 9.0 10 35.5 16.9 SMBJ9.0A KV AV 10.0 11.1 1.0 9.0 10 39.0 15.4 SMBJ10 KW AW 11.1 13.6 1.0 10 5.0 31.9 18.8 17.0 SMBJ10A KX AX 11.1 12.3 1.0 10 5.0 35.3 SMBJ11 KY AY 12.2 14.9 1.0 11 5.0 29.9 20.1 SMBJ11A KZ AZ 12.2 13.5 1.0 11 5.0 33.0 18.2 SMBJ12 LD BD 13.3 16.3 1.0 12 5.0 27.3 22.0 SMBJ12A LE BE 13.3 14.7 1.0 12 5.0 30.2 19.9 SMBJ13 LF BF 14.4 17.6 1.0 13 1.0 25.2 23.8 SMBJ13A LG BG 14.4 15.9 1.0 13 1.0 27.9 21.5 SMBJ14 LH BH 15.6 19.1 1.0 14 1.0 23.3 25.8 SMBJ14A LK BK 15.6 17.2 1.0 14 1.0 25.9 23.2 SMBJ15 LL BL 16.7 20.4 1.0 15 1.0 22.3 26.9 SMBJ15A LM BM 16.7 18.5 1.0 15 1.0 24.6 24.4 SMBJ16 LN BN 17.8 21.8 1.0 16 1.0 20.8 28.8 SMBJ16A LP BP 17.8 19.7 1.0 16 1.0 23.1 26.0 SMBJ17 LQ BQ 18.9 23.1 1.0 17 1.0 19.7 30.5 27.6 SMBJ17A LR BR 18.9 20.9 1.0 17 1.0 21.7 SMBJ18 LS BS 20.0 24.4 1.0 18 1.0 18.6 32.2 SMBJ18A LT BT 20.0 22.1 1.0 18 1.0 20.5 29.2 35.8 SMBJ20 LU BU 22.2 27.1 1.0 20 1.0 16.8 SMBJ20A LV BV 22.2 24.5 1.0 20 1.0 18.5 32.4 SMBJ22 LW BW 24.4 29.8 1.0 22 1.0 15.2 39.4 SMBJ22A LX BX 24.4 26.9 1.0 22 1.0 16.9 35.5 SMBJ24 LY BY 26.7 32.6 1.0 24 1.0 14.0 43.0 SMBJ24A LZ BZ 26.7 29.5 1.0 24 1.0 15.4 38.9 SMBJ26 MD CD 28.9 35.3 1.0 26 1.0 12.9 46.6 SMBJ26A ME CE 28.9 31.9 1.0 26 1.0 14.3 42.1 SMBJ28 MF CF 31.1 38.0 1.0 28 1.0 12.0 50.0 45.4 SMBJ28A MG CG 31.1 34.4 1.0 28 1.0 13.2 SMBJ30 MH CH 33.3 40.7 1.0 30 1.0 11.2 53.5 SMBJ30A MK CK 33.3 36.8 1.0 30 1.0 12.4 48.4 Notes: 1. V(BR) measured after IT applied for 300us square wave pulse or equivalent 2. Surge current waveform per Fig. 3 and derate per Fig. 2 3. For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled 4. All terms and symbols are consistent with ANSI/IEEE C62.35 5. For the bidirectional SMBJ5.0CA, the maximum V(BR) is 7.25V. 590 Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. VF=3.5V at IF=50A (uni-directional only) Device marking co d e Breakdow n voltage V(BR) (Volts) (1) Max. Test current at IT (mA) Stand-off voltage VWM (Volts) Maximum reverse leakage at VWM ID(3) (uA) Maximum peak pulse surge current IPPM(2) (A) Maximum clamping voltage at IPPM VC (Volts) Device type UNI BI Min. SMBJ33 ML CL 36.7 44.9 1.0 33 1.0 10.2 59.0 SMBJ33A MM CM 36.7 40.6 1.0 33 1.0 11.3 53.3 SMBJ36 MN CN 40.0 48.9 1.0 36 1.0 9.3 64.3 SMBJ36A MP CP 40.0 44.2 1.0 36 1.0 10.3 58.1 SMBJ40 MQ CQ 44.4 54.3 1.0 40 1.0 8.4 71.4 SMBJ40A MR CR 44.4 49.1 1.0 40 1.0 9.3 64.5 SMBJ43 MS CS 47.8 58.4 1.0 43 1.0 7.8 76.7 SMBJ43A MT CT 47.8 52.8 1.0 43 1.0 8.6 69.4 SMBJ45 MU CU 50.0 61.1 1.0 45 1.0 7.5 80.3 SMBJ45A MV CV 50.0 55.3 1.0 45 1.0 8.3 72.7 SMBJ48 MW CW 53.3 65.1 1.0 48 1.0 7.0 85.5 SMBJ48A MX CX 53.3 58.9 1.0 48 1.0 7.8 77.4 SMBJ51 MY CY 56.7 69.3 1.0 51 1.0 6.6 91.1 SMBJ51A MZ CZ 56.7 62.7 1.0 51 1.0 7.3 82.4 SMBJ54 ND DD 60.0 73.3 1.0 54 1.0 6.2 96.3 SMBJ54A NE DE 60.0 66.3 1.0 54 1.0 6.9 87.1 SMBJ58 NF DF 64.4 78.7 1.0 58 1.0 5.8 103 SMBJ58A NG DG 64.4 71.2 1.0 58 1.0 6.4 93.6 SMBJ60 NH DH 66.7 81.5 1.0 60 1.0 5.6 107 SMBJ60A NK DK 66.7 73.7 1.0 60 1.0 6.2 96.8 SMBJ64 NL DL 71.1 86.9 1.0 64 1.0 5.3 114 SMBJ64A NM DM 71.1 78.6 1.0 64 1.0 5.8 103 SMBJ70 NN DN 77.8 95.1 1.0 70 1.0 4.8 125 SMBJ70A NP DP 77.8 86.0 1.0 70 1.0 5.3 113 SMBJ75 NQ DQ 83.3 102 1.0 75 1.0 4.5 134 SMBJ75A NR DR 83.3 92.1 1.0 75 1.0 5.0 121 SMBJ78 NS DS 86.7 106 1.0 78 1.0 4.3 139 126 SMBJ78A NT DT 86.7 95.8 1.0 78 1.0 4.8 SMBJ85 NU DU 94.4 115 1.0 85 1.0 4.0 151 SMBJ85A NV DV 94.4 104 1.0 85 1.0 4.4 137 SMBJ90 NW DW 100 122 1.0 90 1.0 3.8 160 SMBJ90A NX DX 100 111 1.0 90 1.0 4.1 146 SMBJ100 NY DY 111 136 1.0 100 1.0 3.4 179 162 SMBJ100A NZ DZ 111 123 1.0 100 1.0 3.7 SMBJ110 PD FD 122 149 1.0 110 1.0 3.1 196 SMBJ110A PE FE 122 135 1.0 110 1.0 3.4 177 SMBJ120 PF FF 133 163 1.0 120 1.0 2.8 214 SMBJ120A PG FG 133 147 1.0 120 1.0 3.1 193 SMBJ130 PH FH 144 176 1.0 130 1.0 2.6 231 SMBJ130A PK FK 144 159 1.0 130 1.0 2.9 209 268 SMBJ150 PL FL 167 204 1.0 150 1.0 2.2 SMBJ150A PM FM 167 185 1.0 150 1.0 2.5 243 SMBJ160 PN FN 178 218 1.0 160 1.0 2.1 287 259 SMBJ160A PP FP 178 197 1.0 160 1.0 2.3 SMBJ170 PQ FQ 189 231 1.0 170 1.0 2.0 304 SMBJ170A PR FR 189 209 1.0 170 1.0 2.2 275 292 SMBJ180A PT FT 201 222 1.0 180 1.0 2.1 SMBJ200A PV FV 224 247 1.0 200 1.0 1.9 324 SMBJ220A PX FX 246 272 1.0 220 1.0 1.7 356 SMBJ250A PZ FZ 279 309 1.0 250 1.0 1.5 405 SMBJ300A QE GE 335 371 1.0 300 1.0 1.3 486 567 SMBJ350A QG GG 391 432 1.0 350 1.0 1.1 SMBJ400A QK GK 447 494 1.0 400 1.0 0.9 648 SMBJ440A QM GM 492 543 1.0 440 1.0 0.9 713 Notes: 1. V(BR) measured after IT applied for 300us square wave pulse or equivalent 2. Surge current waveform per Fig. 3 and derate per Fig. 2 3. For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled 4. All terms and symbols are consistent with ANSI/IEEE C62.35 5. For parts without A, the VBR is +10% 591 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 592